main logo

Raspberry Ups Hat

Die 10 besten Produkte von Dezember 2025
Letzte Aktualisierung: 9. Dezember 2025
Waveshare
Waveshare
Waveshare UPS HAT (E) for Raspberry Pi 5/4B/3B+, Supports 4× 21700 Li Batt (NOT Included), Bi-Directional Fast Charging, 5V 6A Output, Pogo Pins Connector
star

98

MAXIMALE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#1 GEWINNER

  • The UPS HAT (E) is an uninterruptible power supply (UPS) expansion board specially designed for Raspberry Pi series. Onboard batt fuel gauge IC, fast charging chip and high-power buck chip to realize higher power input and output. Supports monitoring the operating state of the HAT via the I2C interface.
  • Adopts pogo pins connector design, compatible with Raspberry Pi 5 / 4B / 3B+. Supports displaying batt level on the system, easy to check the operating state of the HAT
  • Onboard Type-C port with bi-directional fast charging, supports multiple charging input / output protocols such as PD3.0, up to 40W charging power. Onboard high-power buck chip for stable 5V 6A power output
  • Onboard batt fuel gauge IC for reading batt voltage, current, power, remaining capacity and other parameters. Onboard MCU management, supports detecting power connection and booting the Pi
  • Supports I2C bus communication for monitoring the operating status of Type-C port and batt in real time. Supports 4× 21700 Li batt (NOT included), larger capacity and longer batt life. Can provide with online development resources and manual
  • 44,99 € AUF AMAZON
Waveshare
Waveshare
Waveshare UPS Hat (C) for Raspberry Pi Zero 5V Uninterruptible Power Supply Multi Batt Protection Circuits(Batt is not Included)
star

96

BESTE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#2

  • Power Your Pi Zero Seamlessly From Power Connection OR The Backup batt. Supports Recharging And Regulated 5V Output At The Same Time, I2C Monitoring.
  • Onboard spring pogo pins for connecting with Raspberry Pi Zero series boards. Li-po batt recharge chip, with dynamic path management, more stable power supply.
  • Voltage boost chip, providing regulated 5V power output. I2C bus communication, monitoring the batt voltage, current, power, and remaining capacity in real time.
  • Multi batt protection circuits: over charge/discharge protection, over current protection, and short circuit protection, more safe and stable.
  • Recharging indicator for monitoring the batt operating status.
  • 28,99 € AUF AMAZON
Waveshare
Waveshare
Waveshare UPS Hat (B) for Raspberry Pi 5V Uninterruptible Power Supply 5A High Current with Pogo Pins Connector
star

92

TOP QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#3

  • Designed for Raspberry Pi series, compatible with Raspberry Pi 3 / 3B+ / 4B, etc.
  • I2C bus communication, monitoring the batt voltage, current, power, and remaining capacity in real time
  • Multi batt protection circuits: over charge/discharge protection, over current protection, short circuit protection, and reverse protection, along with the equalizing charge feature, more safe and stable
  • Onboard 5V regulator, up to 5A continuous output current, more sufficient power source for Raspberry Pi
  • 5V USB output, convenient for powering other boards batt warning indicators, easy to check if the batt is connected correctly
  • 31,99 € AUF AMAZON
Waveshare
Waveshare
Waveshare UPS HAT (D) for Raspberry Pi, Supports 21700 Li Batt (NOT Included), 5V Uninterruptible Power Supply, Pogo Pins Connector, Supports Charging & Power Output at The Same Time
star

90

HOHE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#4

  • Adopts pogo pins connector design, compatible with Raspberry Pi 3 / 3B+ / 4B, etc. I2C bus communication, monitoring the batt voltage, current, power, and remaining capacity in real time
  • Onboard Li batt charging chip, with dynamic path management, more stable power supply. Onboard MCU management, supports detecting power connection and booting the Pi
  • Multi batt protection circuits: over charge/discharge protection, over current protection, short circuit protection, more safe and stable
  • Onboard LED indicators for monitoring the batt operating status. Supports displaying batt level on the system, easy to check the batt remaining capacity
  • Onboard boost converter chip for stable 5V power output. Provide with online development resources and manual(Obtain from 24hour customer service)
  • 35,99 € AUF AMAZON
Waveshare
Waveshare
Waveshare UPS HAT for Raspberry Pi, 5V Uninterruptible Power Supply, Multi Batt Protection Circuits, Power Your Pi Seamlessly from Power Connection OR The Backup Batt
star

83

SICHERE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#5

  • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards like Raspberry Pi 4B/3B+/3B/2B/B+/A+/Zero/Zero W/Zero WH
  • I2C bus communication, monitoring the batt voltage, current, power, and remaining capacity in real time
  • Multi batt protection circuits: over charge/discharge protection, over current protection, short circuit protection, and reverse protection, along with the equalizing charge feature, more safe and stable
  • Onboard 5 V regulator, up to 2.5 A continuous output current. 5 V USB output, convenient for powering other boards
  • batt warning indicators, easy to check if the batt is connected correctly. Comes with development resources and manual (English language not guaranteed)
  • 33,99 € AUF AMAZON
Geekworm
Geekworm
Geekworm X1200 5V UPS Shield for Raspberry Pi 5, with Max 5.1V 5A Output & Auto Power On & Safe Shutdown & Power Loss Detection Function
star

81

GUTE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#6

  • 【Compatibility】 for Raspberry Pi 5 8GB / 4GB / 2GB / 1GB
  • 【Function】X1200 provides max 5.1V 5000mA Power Backup, intelligent and safe power management like auto power on, safe shutdown, power loss and power adapter failure detection, on-board power button to power on/off
  • 【Versatile Design】X1200 is designed to be attached on bottom and don't use the 40-pin header, enabling easy stacking with other Raspberry Pi accessory boards. This versatility allows you to expand the functionality of your Raspberry Pi and create enhanced applications tailored to your specific needs.
  • 【How to Power】Power via X1200 USB-C port: 5Vdc 5A via USB Type-C; (Recommended power adapter ASIN: B0CP8SRXSC)
  • 【18650 Battery Reuirement】Battery length max 65.3mm, diameter max 18.5mm. NOTE: NOT include batteries!
  • 【Packing List】 X1200 Expansion Board x 1, Screws Pack x 1 (Not include raspberry pi 5 motherboard, batteries or power adapter)
  • 【Matching Case (NOT included)】Refer to X1200-C1 Case (ASIN: B0D4Z7NDNP)
  • 52,89 € AUF AMAZON
Geekworm
Geekworm
Geekworm Raspberry Pi UPS, X728 V2.5 (Max 5.1V 6A) 18650 UPS with Power Loss Detection & Auto On & Safe Shutdown & Buzzer for Raspberry Pi 5/Raspberry Pi 4/3B+/3B/2B
star

80

GUTE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#7

  • 【Function】X728 provides max 5.1V 6000mA Power Backup, intelligent and safe power management, safe shutdown, auto power-on, full poweroff from software, RTC real- time clock, and a buzzer
  • 【Support External Battery Holder】Can connect external battery holder to increase battery capacity
  • 【How to Power】Power via X728 USB-C port: 5Vdc ±5%, ≥3A; Via X728 DC power jack : 5Vdc ±5%, ≥4A; Recommend Geekworm 20W 5V 4A USB C PSU (ASIN: B09J4V3RYK)
  • 【Packing List】 X728 Expansion Board x 1, Screws Pack x 1 (Not include raspberry pi motherboard or batteries)
  • 【Matching Case (Not included)】Refer to X728-C1 Metal Case (ASIN: B0FLXTJQT4)
  • 50,99 € AUF AMAZON
Geekworm
Geekworm
Geekworm X1201 Ultra-Thin 18650 UPS Shield for Raspberry Pi 5, with Max 5.1V 5A Output & Auto Power On & Safe Shutdown & Power Loss Detection Function
star

78

GUTE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#8

  • 【Compatibility】 for Raspberry Pi 5 16GB / 8GB / 4GB
  • 【Function】X1201 provides max 5.1V 5000mA Power Backup, intelligent and safe power management like auto power on, safe shutdown, full power-off from software, power loss and power adapter failure detection, on-board power button to power on/off
  • 【Versatile & Ultra-thin Design】X1201 is designed to be attached on bottom, and expand the battery holders horizontally, which is ultra-thin and enabling easy stacking with other Raspberry Pi accessory boards for enhanced applications.
  • 【How to Power】Power via X1201 USB-C port: 5Vdc 5A via USB Type-C; (Recommended power adapter ASIN: B0CP8SRXSC)
  • 【18650 Battery Reuirement】Battery length max 65.3mm, diameter max 18.5mm. NOTE: NOT include batteries!
  • 【Packing List】 X1201 Expansion Board x 1, Screws Pack x 1 (Not include raspberry pi 5 motherboard, batteries or power adapter)
  • 【Matching Case (NOT included)】Refer to X1201-C1 Case (ASIN: B0D4Z92TBB)
  • 56,89 € AUF AMAZON
GeeekPi
GeeekPi
GeeekPi UPS V5 Power Supply Uninterruptible UPS HAT for Raspberry Pi, Support 18650 Battery Charger Power Bank Power Management Expansion Board 5V for Raspberry Pi 4B/3B+/3B/2B/B+/B/A+/A
27% Rabatt
star

70

GUTE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#9

  • UPS Plus ist eine neue Generation von USV-Energieverwaltungsmodulen, die OTA-Firmware-Upgrades unterstützen und RTC onboard unterstützen.
  • Es gibt zwei INA219-Chips an Bord, um die Batteriespannung und den Spannungsausgang von UPS Plus an Raspberry Pi zu erkennen.
  • Kompatibel mit Raspberry Pi 4B / 3B+ / 3B / 2B / B+ / B / A+ / A
  • Paket beinhaltet: 1 x UPS Plus für Raspberry Pi, 4 x M2,5 Kupfersäule, 4 x M2,5 Schrauben, 4 x M2,5 langer Kupferstab, 4 x M2,5 Muttern, 1 x Acrylschild, 1 x Anleitung, Bitte beachten Sie, dass die 18650 Batterien nicht im Lieferumfang enthalten sind.
  • Informationen zur Verwendung finden Sie unter wiki.52pi.com/index.php?title=EP-0136
  • 33,58 € AUF AMAZON
GeeekPi
GeeekPi
GeeekPi Raspberry Pi Pico/Pico W UPS Power Supply Uninterruptible UPS HAT,Support 18650 Lithium Battery Charger Power Bank Power Management Expansion Board for Raspberry Pi Pico/Pico W
16% Rabatt
star

65

GUTE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#10

  • Dies ist ein tragbares Netzteil nur für Raspberry Pi Pico/Pico W.Plug & Play.
  • Unterstützt nur 18650 Lithiumbatterien („18650“ ist eine Bezeichnung für die Abmessungen einer Batterie. Die Ziffernfolge „18650“ gibt den Durchmesser und die Höhe der Batterie an: „18“ steht für einen Durchmesser von ca. 18,0 mm, und „650“ bezeichnet eine Höhe von ca. 65,0 mm.)
  • Die verbleibende Batterieleistung kann an den 4 LED-Anzeigen abgelesen werden. Sie können auch Batteriespannung und Strominformationen lesen, indem Sie das USB-zu-TTL-Kabel an die Pins des seriellen Anschlusses der USV anschließen.
  • Die Ladeaufforderung während des Ladevorgangs ist sehr intuitiv, und wenn der Akku vollständig aufgeladen ist, wird der Ladevorgang beendet und die „Standby-Anzeige“ auf dem Bedienfeld leuchtet auf.
  • Alle GPIOs führen nach außen und bieten klare Siebdrucke, die für Pico-Experimente sehr praktisch sind.
  • 10,90 € AUF AMAZON
raspberry pi ups hat ups hat raspberry pi raspberry ups ups raspberry ups hat raspberry pi 4 ups hat ups hat raspberry pi 4 waveshare ups hat raspberry pi raspberry pi ups hat 18650 raspberry pi 5 ups hat