Ups Hat Raspberry Pi 4
Die 10 besten Produkte von Dezember 2025
Letzte Aktualisierung:
9. Dezember 2025
Waveshare
Waveshare UPS HAT (E) for Raspberry Pi 5/4B/3B+, Supports 4× 21700 Li Batt (NOT Included), Bi-Directional Fast Charging, 5V 6A Output, Pogo Pins Connector
99
MAXIMALE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#1 GEWINNER
▼ Mehr anzeigen
▲ Weniger anzeigen
The UPS HAT (E) is an uninterruptible power supply (UPS) expansion board specially designed for Raspberry Pi series. Onboard batt fuel gauge IC, fast charging chip and high-power buck chip to realize higher power input and output. Supports monitoring the operating state of the HAT via the I2C interface.
Adopts pogo pins connector design, compatible with Raspberry Pi 5 / 4B / 3B+. Supports displaying batt level on the system, easy to check the operating state of the HAT
Onboard Type-C port with bi-directional fast charging, supports multiple charging input / output protocols such as PD3.0, up to 40W charging power. Onboard high-power buck chip for stable 5V 6A power output
Onboard batt fuel gauge IC for reading batt voltage, current, power, remaining capacity and other parameters. Onboard MCU management, supports detecting power connection and booting the Pi
Supports I2C bus communication for monitoring the operating status of Type-C port and batt in real time. Supports 4× 21700 Li batt (NOT included), larger capacity and longer batt life. Can provide with online development resources and manual
44,99 € AUF AMAZON
Geekworm
Geekworm Raspberry Pi 4 UPS X703, Ultra-compact 18650 UPS Shield with Auto Power On for Raspberry Pi 4 8GB/4GB/2GB Only
97
BESTE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#2
▼ Mehr anzeigen
▲ Weniger anzeigen
【Compatibility】UPS with auto power on and Max 5.1V 4A output for Raspberry Pi 4 Model B 8GB/4GB/2GB, can also stack with other Raspberry Pi accessory boards or 3.5 inch screen for enhanced applications. NOT support Raspberry Pi 3
【3A Fast Charging】Supports 3A fast charging via USB-C socket, add 4 test pins to achieve powered between X703 and Raspberry Pi 4 without additional cable
【Working time】Work with single 18650 Lithium Ion battery with up to 4 hours working time, integrated over current protection, over voltage protection and battery reverse connection protection
【Multiple Onboard Interfaces】Allows power input via Type-C socket or XH2.54 connector; On-board PH2.0 connector allows to connect external power switch
【How to power】5Vdc +/-5% , ≥3A (Via Type-C Port of X703), Recommend 5V 4A 20W power supply (ASIN: B09J4V3RYK)
【Note】DON'T supports software safe shutdown.
【Jumper Cap Description】√① If [CHG] pin is OPEN, battery charging will be started after powering on(short press the on-board button to turn on) and stopped after powering off(press and hold for 2-3 seconds to turn off). If [CHG] pin is SHORT, the battery will be automatically charged once your power adapter connected. The purpose of adding the [CHG] jumper is to extend the life cycle of the battery by reducing the number of recharges. √② If [PON] pin is SHORT, power always on, power button disabled; If [PON] pin is OPEN, press power button to turn on, and hold 3s to turn off.
28,00 € AUF AMAZON
Geekworm
Geekworm Raspberry Pi UPS, X728 V2.5 (Max 5.1V 6A) 18650 UPS with Power Loss Detection & Auto On & Safe Shutdown & Buzzer for Raspberry Pi 5/Raspberry Pi 4/3B+/3B/2B
94
TOP QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#3
▼ Mehr anzeigen
▲ Weniger anzeigen
【Function】X728 provides max 5.1V 6000mA Power Backup, intelligent and safe power management, safe shutdown, auto power-on, full poweroff from software, RTC real- time clock, and a buzzer
【Support External Battery Holder】Can connect external battery holder to increase battery capacity
【How to Power】Power via X728 USB-C port: 5Vdc ±5%, ≥3A; Via X728 DC power jack : 5Vdc ±5%, ≥4A; Recommend Geekworm 20W 5V 4A USB C PSU (ASIN: B09J4V3RYK)
【Packing List】 X728 Expansion Board x 1, Screws Pack x 1 (Not include raspberry pi motherboard or batteries)
【Matching Case (Not included)】Refer to X728-C1 Metal Case (ASIN: B0FLXTJQT4)
50,99 € AUF AMAZON
Waveshare
Waveshare UPS Hat Compatible with Raspberry Pi 5V Uninterruptible Power Supply Multi Batt Protection Circuits Charge and Power Output at The Same Time
90
HOHE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#4
▼ Mehr anzeigen
▲ Weniger anzeigen
Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards. Comes with development resources and manual.
I2C bus communication, monitoring the batt voltage, current, power, and remaining capacity in real time. When the voltage dips too low, it is possible to save files properly and then shutdown the system by software, to avoid any data loss.
Multi batt protection circuits: over charge/discharge protection, over current protection, short circuit protection, and reverse protection, along with the equalizing charge feature, more safe and stable.
Onboard 5V regulator, up to 2.5A continuous output current 5V USB output, convenient for powering other boards. batt warning indicators, easy to check if the batt is connected correctly.
It is able to charge the batt and provide power output at the same time from external power supply. Automatically switch over to batt output if external power supply is unavailable, keeps the system running without any trouble.
33,99 € AUF AMAZON
GeeekPi
GeeekPi UPS V5 Power Supply Uninterruptible UPS HAT for Raspberry Pi, Support 18650 Battery Charger Power Bank Power Management Expansion Board 5V for Raspberry Pi 4B/3B+/3B/2B/B+/B/A+/A
27% Rabatt
84
SICHERE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#5
▼ Mehr anzeigen
▲ Weniger anzeigen
UPS Plus ist eine neue Generation von USV-Energieverwaltungsmodulen, die OTA-Firmware-Upgrades unterstützen und RTC onboard unterstützen.
Es gibt zwei INA219-Chips an Bord, um die Batteriespannung und den Spannungsausgang von UPS Plus an Raspberry Pi zu erkennen.
Kompatibel mit Raspberry Pi 4B / 3B+ / 3B / 2B / B+ / B / A+ / A
Paket beinhaltet: 1 x UPS Plus für Raspberry Pi, 4 x M2,5 Kupfersäule, 4 x M2,5 Schrauben, 4 x M2,5 langer Kupferstab, 4 x M2,5 Muttern, 1 x Acrylschild, 1 x Anleitung, Bitte beachten Sie, dass die 18650 Batterien nicht im Lieferumfang enthalten sind.
Informationen zur Verwendung finden Sie unter wiki.52pi.com/index.php?title=EP-0136
33,58 € AUF AMAZON
Waveshare
Waveshare UPS USV HAT 5V Unterbrechungsfreie Stromversorgung Modul für Raspberry Pi 4B/3B+/3B, bis zu 5A Strom, Pogo Pins Anschluss, Onboard 5V Regler und Multi Batterie Schutzschaltungen, I2C Bus
81
GUTE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#6
▼ Mehr anzeigen
▲ Weniger anzeigen
【5V UPS HAT (B) for Raspberry Pi】Uninterruptible Power Supply designed for Raspberry Pi series, compatible with Raspberry Pi 3 / 3B+ / 4B, etc. powering the Raspberry Pi via Pogo Pins, without using any GPIO resource
【Real Time Monitoring】I2C bus communication, monitoring the batteries voltage, current, power, and remaining capacity in real-time via I2C
【Safe and Stable Circuit Design】Multi battery protection circuits for over charge/discharge, over current, short circuit, and reverse, along with the equalizing charge feature, more safe and stable
【5V USB Output As Well】5V USB output, convenient for powering other boards
【Battery Warning Indicators】Easy to check if the battery is connected correctly
34,99 € AUF AMAZON
iiunius
UPS HAT (E) for Raspberry Pi 5/4B/3B+ Type-C Bi-Directional Fast Charging 5V 6A Output Pogo Pins Connector Supports 4× 21700 Li Batteries (NOT Included)
80
GUTE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#7
▼ Mehr anzeigen
▲ Weniger anzeigen
【Pogo pins connector】Adopts pogo pins connector design, compatible with Raspberry Pi 5 / 4B / 3B+
【Bi-directional fast charging】Onboard Type-C port with bi-directional fast charging, supports multiple charging input / output protocols such as PD3.0, up to 40W charging power. Onboard battery fuel gauge IC for reading battery voltage, current, power, remaining capacity and other parameters
【I2C bus communication】Supports I2C bus communication for monitoring the operating status of Type-C port and batteries in real time Supports 4× 21700 Li batteries (NOT included), larger capacity and longer battery life
【High-power buck chip】Onboard high-power buck chip for stable 5V 6A power output. Supports displaying battery level on the system, easy to check the operating state of the HAT Comes with online development resources and manual
45,11 € AUF AMAZON
Coolwell
UPS HAT (E) for Raspberry Pi 5 / 4B / 3B+, Etc. 5V 6A Output USB-C Port Supports Bi-Directional Fast Charging, Pogo Pins Connector for Raspberry Pi UPS(No Battery)
76
GUTE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#8
▼ Mehr anzeigen
▲ Weniger anzeigen
For Raspberry Pi 5 UPS HAT, onboard Type-C port with bi-directional fast charging, supports multiple charging input / output protocols such as PD3.0, up to 40W charging power
UPS HAT For Raspberry Pi 5, onboard battery fuel gauge IC for reading battery voltage, current, power, remaining capacity and other parameters.
Supports I2C bus communication for monitoring the operating status of Type-C port and batteries in real time; Supports 4× 21700 Li batteries (NOT included), larger capacity and longer battery life
UPS HAT for Raspberry Pi, onboard high-power buck chip for stable 5V 6A power output; Onboard MCU management, supports detecting power connection and booting the Raspberry Pi
Supports displaying battery level on the system, easy to check the operating state of the HAT; Comes with online development resources and manual
43,19 € AUF AMAZON
IBest
UPS HAT (B) for Raspberry Pi Uninterruptible Power Supply with I2C Bus Communication,5V Power Output, up to 5A Current,Multi Battery Protection Circuits
74
GUTE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#9
▼ Mehr anzeigen
▲ Weniger anzeigen
This UPS HAT is Designed for Raspberry Pi series, compatible with Raspberry Pi 3 / 3B+ / 4B, etc.
I2C bus communication, monitoring the batteries voltage, current, power, and remaining capacity in real time
Multi battery protection circuits: over charge/discharge protection, over current protection, short circuit protection, and reverse protection, along with the equalizing charge feature, more safe and stable
Onboard 5V regulator, up to 5A continuous output current, more sufficient power source for Raspberry Pi.5V USB output, convenient for powering other boards
Batteries warning indicators, easy to check if the battery is connected correctly.Comes with development resources and manual
34,95 € AUF AMAZON
GeeekPi
GeeekPi Raspberry Pi Pico/Pico W UPS Power Supply Uninterruptible UPS HAT,Support 18650 Lithium Battery Charger Power Bank Power Management Expansion Board for Raspberry Pi Pico/Pico W
16% Rabatt
65
GUTE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#10
▼ Mehr anzeigen
▲ Weniger anzeigen
Dies ist ein tragbares Netzteil nur für Raspberry Pi Pico/Pico W.Plug & Play.
Unterstützt nur 18650 Lithiumbatterien („18650“ ist eine Bezeichnung für die Abmessungen einer Batterie. Die Ziffernfolge „18650“ gibt den Durchmesser und die Höhe der Batterie an: „18“ steht für einen Durchmesser von ca. 18,0 mm, und „650“ bezeichnet eine Höhe von ca. 65,0 mm.)
Die verbleibende Batterieleistung kann an den 4 LED-Anzeigen abgelesen werden. Sie können auch Batteriespannung und Strominformationen lesen, indem Sie das USB-zu-TTL-Kabel an die Pins des seriellen Anschlusses der USV anschließen.
Die Ladeaufforderung während des Ladevorgangs ist sehr intuitiv, und wenn der Akku vollständig aufgeladen ist, wird der Ladevorgang beendet und die „Standby-Anzeige“ auf dem Bedienfeld leuchtet auf.
Alle GPIOs führen nach außen und bieten klare Siebdrucke, die für Pico-Experimente sehr praktisch sind.
10,90 € AUF AMAZON
raspberry pi 4 ups hat
raspberry pi 4 ups
ups raspberry pi 4
raspberry pi ups hat
ups hat raspberry pi
raspberry pi 4 hat
poe hat raspberry pi 4
raspberry pi 4 fan hat
raspberry pi 4 poe hat
raspberry pi 4 case hat
#1 GEWINNER
