main logo

Raspberry Pi 4 Ups Hat

Die 10 besten Produkte von Dezember 2025
Letzte Aktualisierung: 9. Dezember 2025
Geekworm
Geekworm
Geekworm Raspberry Pi 4 UPS X703, Ultra-compact 18650 UPS Shield with Auto Power On for Raspberry Pi 4 8GB/4GB/2GB Only
star

99

MAXIMALE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#1 GEWINNER

  • 【Compatibility】UPS with auto power on and Max 5.1V 4A output for Raspberry Pi 4 Model B 8GB/4GB/2GB, can also stack with other Raspberry Pi accessory boards or 3.5 inch screen for enhanced applications. NOT support Raspberry Pi 3
  • 【3A Fast Charging】Supports 3A fast charging via USB-C socket, add 4 test pins to achieve powered between X703 and Raspberry Pi 4 without additional cable
  • 【Working time】Work with single 18650 Lithium Ion battery with up to 4 hours working time, integrated over current protection, over voltage protection and battery reverse connection protection
  • 【Multiple Onboard Interfaces】Allows power input via Type-C socket or XH2.54 connector; On-board PH2.0 connector allows to connect external power switch
  • 【How to power】5Vdc +/-5% , ≥3A (Via Type-C Port of X703), Recommend 5V 4A 20W power supply (ASIN: B09J4V3RYK)
  • 【Note】DON'T supports software safe shutdown.
  • 【Jumper Cap Description】√① If [CHG] pin is OPEN, battery charging will be started after powering on(short press the on-board button to turn on) and stopped after powering off(press and hold for 2-3 seconds to turn off). If [CHG] pin is SHORT, the battery will be automatically charged once your power adapter connected. The purpose of adding the [CHG] jumper is to extend the life cycle of the battery by reducing the number of recharges. √② If [PON] pin is SHORT, power always on, power button disabled; If [PON] pin is OPEN, press power button to turn on, and hold 3s to turn off.
  • 28,00 € AUF AMAZON
Geekworm
Geekworm
Geekworm Raspberry Pi UPS, X728 V2.5 (Max 5.1V 6A) 18650 UPS with Power Loss Detection & Auto On & Safe Shutdown & Buzzer for Raspberry Pi 5/Raspberry Pi 4/3B+/3B/2B
star

98

MAXIMALE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#2

  • 【Function】X728 provides max 5.1V 6000mA Power Backup, intelligent and safe power management, safe shutdown, auto power-on, full poweroff from software, RTC real- time clock, and a buzzer
  • 【Support External Battery Holder】Can connect external battery holder to increase battery capacity
  • 【How to Power】Power via X728 USB-C port: 5Vdc ±5%, ≥3A; Via X728 DC power jack : 5Vdc ±5%, ≥4A; Recommend Geekworm 20W 5V 4A USB C PSU (ASIN: B09J4V3RYK)
  • 【Packing List】 X728 Expansion Board x 1, Screws Pack x 1 (Not include raspberry pi motherboard or batteries)
  • 【Matching Case (Not included)】Refer to X728-C1 Metal Case (ASIN: B0FLXTJQT4)
  • 50,99 € AUF AMAZON
Waveshare
Waveshare
Waveshare UPS HAT (E) for Raspberry Pi 5/4B/3B+, Supports 4× 21700 Li Batt (NOT Included), Bi-Directional Fast Charging, 5V 6A Output, Pogo Pins Connector
star

94

TOP QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#3

  • The UPS HAT (E) is an uninterruptible power supply (UPS) expansion board specially designed for Raspberry Pi series. Onboard batt fuel gauge IC, fast charging chip and high-power buck chip to realize higher power input and output. Supports monitoring the operating state of the HAT via the I2C interface.
  • Adopts pogo pins connector design, compatible with Raspberry Pi 5 / 4B / 3B+. Supports displaying batt level on the system, easy to check the operating state of the HAT
  • Onboard Type-C port with bi-directional fast charging, supports multiple charging input / output protocols such as PD3.0, up to 40W charging power. Onboard high-power buck chip for stable 5V 6A power output
  • Onboard batt fuel gauge IC for reading batt voltage, current, power, remaining capacity and other parameters. Onboard MCU management, supports detecting power connection and booting the Pi
  • Supports I2C bus communication for monitoring the operating status of Type-C port and batt in real time. Supports 4× 21700 Li batt (NOT included), larger capacity and longer batt life. Can provide with online development resources and manual
  • 44,99 € AUF AMAZON
Geekworm
Geekworm
Geekworm Raspberry Pi 5 UPS (X1202), 4-Cell 18650 UPS (Max 5.1V 5A Output) with Wide 6-18V Input | Auto Power On | Safe Shutdown | Power Loss Detection
star

90

HOHE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#4

  • 【Compatibility】 for Raspberry Pi 5 8GB / 4GB / 2GB / 1GB
  • 【Function】X1202 provides max 5.1V 5000mA Power Backup, intelligent and safe power management like auto power on, safe shutdown, full power-off from software, power loss and power adapter failure detection, on-board power button to power on/off
  • 【Versatile Design】X1202 is designed to be attached on bottom, enabling easy stacking with other Raspberry Pi accessory boards for enhanced applications.
  • 【How to Power】Power via DC 5521 power jack of X1202: 6-18Vdc , ≥3A (Recommend 12V 5A 60W PSU ASIN: B0BD81W6SN); OR power via USB-C port of X1202: 5Vdc 5A via USB Type-C (Recommended 5V 5A USB-C power adapter ASIN: B0CP8SRXSC)
  • 【Packing List】 X1202 Expansion Board x 1, Screws Pack x 1 (Not include raspberry pi 5 motherboard, batteries or power adapter)
  • 【Matching Case(NOT included)】Refer to X1202-C1 (ASIN: B0D4ZBXGSH)
  • 64,00 € AUF AMAZON
Waveshare
Waveshare
Waveshare UPS HAT (D) for Raspberry Pi, Supports 21700 Li Batt (NOT Included), 5V Uninterruptible Power Supply, Pogo Pins Connector, Supports Charging & Power Output at The Same Time
star

83

SICHERE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#5

  • Adopts pogo pins connector design, compatible with Raspberry Pi 3 / 3B+ / 4B, etc. I2C bus communication, monitoring the batt voltage, current, power, and remaining capacity in real time
  • Onboard Li batt charging chip, with dynamic path management, more stable power supply. Onboard MCU management, supports detecting power connection and booting the Pi
  • Multi batt protection circuits: over charge/discharge protection, over current protection, short circuit protection, more safe and stable
  • Onboard LED indicators for monitoring the batt operating status. Supports displaying batt level on the system, easy to check the batt remaining capacity
  • Onboard boost converter chip for stable 5V power output. Provide with online development resources and manual(Obtain from 24hour customer service)
  • 35,99 € AUF AMAZON
GeeekPi
GeeekPi
GeeekPi UPS Gen 6 Power Module UPS V6 Uninterruptible UPS Shield for Raspberry Pi 5/4B/Orange Pi - Expandable Battery Backup, OTA Upgrades, I2C Monitoring & PikaPython Support
star

82

SICHERE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#6

  • Erweiterbare Akkukapazität: Unterstützt bis zu 4 Kanäle mit parallelgeschalteten 8,4-V-Lithium-Akku-Gruppen; pro Slot werden zwei 3,7-V-18650-Lithium-Akkus in Serie geschaltet (18650-Akkus nicht im Lieferumfang), um die Laufzeit von Raspberry Pi 5/4B und anderen SBCs deutlich zu verlängern
  • Unterbrechungsfreie Umschaltung & automatische Wiederherstellung: Bumpless Transfer zwischen externer Stromversorgung und Akku-Backup; konfigurierbare Spannungsschwellen sorgen für automatischen Neustart nach Wiederkehr der externen Spannung
  • Echtzeit-Überwachung & individuelle Steuerung: Via I²C werden Akkuspannung, Temperatur und Kapazität live ausgelesen; PikaPython-Skripte ermöglichen erweiterte DIY-Statuskontrolle und programmierbare LED-Indikatoren
  • Zukunftssicher durch OTA-Updates: Neue Funktionen per Over-the-Air-Firmware-Update freischalten; DFU-Modus garantiert Kompatibilität mit künftigen Erweiterungen und eigenem Custom-Firmware-Upload
  • Datenschutz & sicheres Herunterfahren: Sicherer Shutdown-Countdown verhindert Datenverlust bei Stromausfall; Tiefentladeschutz vermeidet Akku-Schleifen – ideal für kritische Anwendungen
  • Lieferumfang: 1 × Aluminium-Kühlkörper mit automatisch geregelten Lüfter 1 × UPS-v6-Hauptplatine 1 × Serie-Akkuhalter (für 2 × 18650 in Serie) 1 × 4 cm Akku-Anschlusskabel 1 × XH4P-auf-15P-Buchse / 20 cm 1 × Acryl-Akku-Untergestell 1 × Metall-Akku-Untergestell 1 × Kupfer-Abstandsbolzen-Set 1 × Flachkopfschrauben-Set (M2,5) 1 × UPS-v6-Bedienungsanleitung
  • Produkt-Wiki: wiki.52pi.com/index.php?title=EP-0245
  • 59,99 € AUF AMAZON
Waveshare
Waveshare
Waveshare UPS Hat (B) for Raspberry Pi 5V Uninterruptible Power Supply 5A High Current with Pogo Pins Connector
star

78

GUTE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#7

  • Designed for Raspberry Pi series, compatible with Raspberry Pi 3 / 3B+ / 4B, etc.
  • I2C bus communication, monitoring the batt voltage, current, power, and remaining capacity in real time
  • Multi batt protection circuits: over charge/discharge protection, over current protection, short circuit protection, and reverse protection, along with the equalizing charge feature, more safe and stable
  • Onboard 5V regulator, up to 5A continuous output current, more sufficient power source for Raspberry Pi
  • 5V USB output, convenient for powering other boards batt warning indicators, easy to check if the batt is connected correctly
  • 31,99 € AUF AMAZON
GeeekPi
GeeekPi
GeeekPi UPS V5 Power Supply Uninterruptible UPS HAT for Raspberry Pi, Support 18650 Battery Charger Power Bank Power Management Expansion Board 5V for Raspberry Pi 4B/3B+/3B/2B/B+/B/A+/A
27% Rabatt
star

78

GUTE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#8

  • UPS Plus ist eine neue Generation von USV-Energieverwaltungsmodulen, die OTA-Firmware-Upgrades unterstützen und RTC onboard unterstützen.
  • Es gibt zwei INA219-Chips an Bord, um die Batteriespannung und den Spannungsausgang von UPS Plus an Raspberry Pi zu erkennen.
  • Kompatibel mit Raspberry Pi 4B / 3B+ / 3B / 2B / B+ / B / A+ / A
  • Paket beinhaltet: 1 x UPS Plus für Raspberry Pi, 4 x M2,5 Kupfersäule, 4 x M2,5 Schrauben, 4 x M2,5 langer Kupferstab, 4 x M2,5 Muttern, 1 x Acrylschild, 1 x Anleitung, Bitte beachten Sie, dass die 18650 Batterien nicht im Lieferumfang enthalten sind.
  • Informationen zur Verwendung finden Sie unter wiki.52pi.com/index.php?title=EP-0136
  • 33,58 € AUF AMAZON
DFRobot
DFRobot
DFRobot Raspberry Pi UPS HAT, DFR0494 - Schwarz, Kompakt, UPS für Raspberry Pi Anwendungen
star

75

GUTE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#9

  • DFRobot Raspberry Pi UPS HAT, DFR0494
  • Standard Raspberry Pi-Erweiterungsschnittstelle, kompatibel mit anderen Erweiterungskarten
  • Unterstützt 2A maximale Stromausgabe, geeignet für mehr Himbeer-Pi-Anwendungen
  • Automatische Umschaltung des Lade- / Aufladewegs gegen Abschalten
  • 3,7-V-Lithiumbatterie ist aus Transportgründen nicht im Lieferumfang enthalten
  • 23,90 € AUF AMAZON
Waveshare
Waveshare
Waveshare UPS HAT for Raspberry Pi, 5V Uninterruptible Power Supply, Multi Batt Protection Circuits, Power Your Pi Seamlessly from Power Connection OR The Backup Batt
star

70

GUTE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#10

  • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards like Raspberry Pi 4B/3B+/3B/2B/B+/A+/Zero/Zero W/Zero WH
  • I2C bus communication, monitoring the batt voltage, current, power, and remaining capacity in real time
  • Multi batt protection circuits: over charge/discharge protection, over current protection, short circuit protection, and reverse protection, along with the equalizing charge feature, more safe and stable
  • Onboard 5 V regulator, up to 2.5 A continuous output current. 5 V USB output, convenient for powering other boards
  • batt warning indicators, easy to check if the batt is connected correctly. Comes with development resources and manual (English language not guaranteed)
  • 33,99 € AUF AMAZON
ups hat raspberry pi 4 raspberry pi 4 ups ups raspberry pi 4 raspberry pi ups hat ups hat raspberry pi raspberry pi 4 hat poe hat raspberry pi 4 raspberry pi 4 fan hat raspberry pi 4 poe hat raspberry pi 4 case hat