Ups Raspberry
Die 10 besten Produkte von Dezember 2025
Letzte Aktualisierung:
10. Dezember 2025
Waveshare
Waveshare UPS Hat (C) for Raspberry Pi Zero 5V Uninterruptible Power Supply Multi Batt Protection Circuits(Batt is not Included)
98
MAXIMALE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#1 GEWINNER
▼ Mehr anzeigen
▲ Weniger anzeigen
Power Your Pi Zero Seamlessly From Power Connection OR The Backup batt. Supports Recharging And Regulated 5V Output At The Same Time, I2C Monitoring.
Onboard spring pogo pins for connecting with Raspberry Pi Zero series boards. Li-po batt recharge chip, with dynamic path management, more stable power supply.
Voltage boost chip, providing regulated 5V power output. I2C bus communication, monitoring the batt voltage, current, power, and remaining capacity in real time.
Multi batt protection circuits: over charge/discharge protection, over current protection, and short circuit protection, more safe and stable.
Recharging indicator for monitoring the batt operating status.
28,99 € AUF AMAZON
Geekworm
Geekworm X306 V1.3 Ultra-Thin UPS Shield for Raspberry Pi Zero 2 W
97
BESTE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#2
▼ Mehr anzeigen
▲ Weniger anzeigen
【Update】Aktualisiert auf V1.3 im Juli 2024. 1. Nur kompatibel mit Raspberry Pi Zero 2W；2. 3 Standard USB-A 2.0 Ports entfernt；3. 4. 4-Pin-Header für externen Netzschalter und Always-On-Power-Option entfernt; 4. Kleinere Größe, vereinfachte Nutzung
【Kompatibilität】Kompatibel mit Raspberry Pi Zero 2 W NUR
【Ultra-dünne USV】Ideale unterbrechungsfreie Stromversorgung (USP) Lösung für Raspberry Pi Zero W/2 W, max. 5,1 V, 4000 mA Stromunterstützung mit Einzelzellenbatteriehalter
【Stromversorgung】 Stromversorgung über USB-C 5V Power In Port des X306; 5Vdc +/-5% , ≥3A; Empfohlenes Geekworm 5V 4A 20W USB-C Netzteil(ASIN: B09J4V3RYK)
【Wie zu kühlen】 Empfohlen für die Verwendung mit C296 Aluminium-Kühlkörper (ASIN: B09QMBCXLB) für Raspberry Pi Zero 2 W.
【Packliste】1 x X306 Erweiterungsplatine; 4 x M2.5x5mm Schrauben; Hinweis: nicht inlcude Raspberry Pi Board, Batterie, GPIO Header & Stromadapter.
28,00 € AUF AMAZON
Geekworm
Geekworm X1200 5V UPS Shield for Raspberry Pi 5, with Max 5.1V 5A Output & Auto Power On & Safe Shutdown & Power Loss Detection Function
95
TOP QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#3
▼ Mehr anzeigen
▲ Weniger anzeigen
【Compatibility】 for Raspberry Pi 5 8GB / 4GB / 2GB / 1GB
【Function】X1200 provides max 5.1V 5000mA Power Backup, intelligent and safe power management like auto power on, safe shutdown, power loss and power adapter failure detection, on-board power button to power on/off
【Versatile Design】X1200 is designed to be attached on bottom and don't use the 40-pin header, enabling easy stacking with other Raspberry Pi accessory boards. This versatility allows you to expand the functionality of your Raspberry Pi and create enhanced applications tailored to your specific needs.
【How to Power】Power via X1200 USB-C port: 5Vdc 5A via USB Type-C; (Recommended power adapter ASIN: B0CP8SRXSC)
【18650 Battery Reuirement】Battery length max 65.3mm, diameter max 18.5mm. NOTE: NOT include batteries!
【Packing List】 X1200 Expansion Board x 1, Screws Pack x 1 (Not include raspberry pi 5 motherboard, batteries or power adapter)
【Matching Case (NOT included)】Refer to X1200-C1 Case (ASIN: B0D4Z7NDNP)
52,89 € AUF AMAZON
Waveshare
Waveshare UPS HAT (E) for Raspberry Pi 5/4B/3B+, Supports 4× 21700 Li Batt (NOT Included), Bi-Directional Fast Charging, 5V 6A Output, Pogo Pins Connector
90
HOHE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#4
▼ Mehr anzeigen
▲ Weniger anzeigen
The UPS HAT (E) is an uninterruptible power supply (UPS) expansion board specially designed for Raspberry Pi series. Onboard batt fuel gauge IC, fast charging chip and high-power buck chip to realize higher power input and output. Supports monitoring the operating state of the HAT via the I2C interface.
Adopts pogo pins connector design, compatible with Raspberry Pi 5 / 4B / 3B+. Supports displaying batt level on the system, easy to check the operating state of the HAT
Onboard Type-C port with bi-directional fast charging, supports multiple charging input / output protocols such as PD3.0, up to 40W charging power. Onboard high-power buck chip for stable 5V 6A power output
Onboard batt fuel gauge IC for reading batt voltage, current, power, remaining capacity and other parameters. Onboard MCU management, supports detecting power connection and booting the Pi
Supports I2C bus communication for monitoring the operating status of Type-C port and batt in real time. Supports 4× 21700 Li batt (NOT included), larger capacity and longer batt life. Can provide with online development resources and manual
44,99 € AUF AMAZON
Geekworm
Geekworm Raspberry Pi 4 UPS X703, Ultra-compact 18650 UPS Shield with Auto Power On for Raspberry Pi 4 8GB/4GB/2GB Only
85
SICHERE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#5
▼ Mehr anzeigen
▲ Weniger anzeigen
【Compatibility】UPS with auto power on and Max 5.1V 4A output for Raspberry Pi 4 Model B 8GB/4GB/2GB, can also stack with other Raspberry Pi accessory boards or 3.5 inch screen for enhanced applications. NOT support Raspberry Pi 3
【3A Fast Charging】Supports 3A fast charging via USB-C socket, add 4 test pins to achieve powered between X703 and Raspberry Pi 4 without additional cable
【Working time】Work with single 18650 Lithium Ion battery with up to 4 hours working time, integrated over current protection, over voltage protection and battery reverse connection protection
【Multiple Onboard Interfaces】Allows power input via Type-C socket or XH2.54 connector; On-board PH2.0 connector allows to connect external power switch
【How to power】5Vdc +/-5% , ≥3A (Via Type-C Port of X703), Recommend 5V 4A 20W power supply (ASIN: B09J4V3RYK)
【Note】DON'T supports software safe shutdown.
【Jumper Cap Description】√① If [CHG] pin is OPEN, battery charging will be started after powering on(short press the on-board button to turn on) and stopped after powering off(press and hold for 2-3 seconds to turn off). If [CHG] pin is SHORT, the battery will be automatically charged once your power adapter connected. The purpose of adding the [CHG] jumper is to extend the life cycle of the battery by reducing the number of recharges. √② If [PON] pin is SHORT, power always on, power button disabled; If [PON] pin is OPEN, press power button to turn on, and hold 3s to turn off.
28,00 € AUF AMAZON
Treedix
Treedix UPS 5V unterbrechungsfreie Stromversorgung für Raspberry Pi, gleichzeitiges Laden und Entladen unterstützt 18650 Batterie Ladegerät Power Bank kompatibel für Raspberry Pi Zero/2B/3B/3B+/4B
81
GUTE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#6
▼ Mehr anzeigen
▲ Weniger anzeigen
【Spezielles Stromversorgungsmodul】Diese unterbrechungsfreie Stromversorgung liefert eine stabile 5V/3A-Ausgangsleistung mit dualen USB-Hochstromanschlüssen, die sich 3A Strom teilen. Unter gut belüfteten Bedingungen kann der Ausgangsstrom bis zu 5A erreichen.
【Hochstrom-Pogo-Pin-Stromversorgung】Pogo-Pin-Kontakt für die Stromversorgung, ohne GPIO-Schnittstellen zu belegen. Enthält eine eingebaute Stromanzeige für eine klare Sichtbarkeit des Batteriestatus.
【Mehrfach-Anschluss Flexible Aufladung】Ausgestattet mit Type-C, Micro-USB und USB-A Anschlüssen. Bietet eine stabile 5V/2A-Ausgangsleistung für andere Geräte und ermöglicht gleichzeitig bequemes eigenes Aufladen für unterbrechungsfreie Stromversorgung.
【Mehrfach-Schutzschaltung】Integriert sechs Schutzmechanismen gegen Überladung, Überhitzung, Überstrom, Unterspannung und Kurzschluss für einen stabilen und sicheren Betrieb.
【Breite Kompatibilität】Vollständig kompatibel mit Raspberry Pi Zero/2B/3B/3B+/4B. Ideal für Embedded-Entwicklung, Projektdebugging und tägliches Lernen – Ihre ultimative Stromversorgungslösung.
26,99 € AUF AMAZON
Geekworm
Geekworm Raspberry Pi 5 UPS (X1202), 4-Cell 18650 UPS (Max 5.1V 5A Output) with Wide 6-18V Input | Auto Power On | Safe Shutdown | Power Loss Detection
79
GUTE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#7
▼ Mehr anzeigen
▲ Weniger anzeigen
【Compatibility】 for Raspberry Pi 5 8GB / 4GB / 2GB / 1GB
【Function】X1202 provides max 5.1V 5000mA Power Backup, intelligent and safe power management like auto power on, safe shutdown, full power-off from software, power loss and power adapter failure detection, on-board power button to power on/off
【Versatile Design】X1202 is designed to be attached on bottom, enabling easy stacking with other Raspberry Pi accessory boards for enhanced applications.
【How to Power】Power via DC 5521 power jack of X1202: 6-18Vdc , ≥3A (Recommend 12V 5A 60W PSU ASIN: B0BD81W6SN); OR power via USB-C port of X1202: 5Vdc 5A via USB Type-C (Recommended 5V 5A USB-C power adapter ASIN: B0CP8SRXSC)
【Packing List】 X1202 Expansion Board x 1, Screws Pack x 1 (Not include raspberry pi 5 motherboard, batteries or power adapter)
【Matching Case(NOT included)】Refer to X1202-C1 (ASIN: B0D4ZBXGSH)
64,00 € AUF AMAZON
Waveshare
Waveshare Uninterruptible Power Supply UPS Module Supports Charging and Power Output at The Same Time 3S & 5V 5A Output
75
GUTE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#8
▼ Mehr anzeigen
▲ Weniger anzeigen
Onboard 5V regulator, up to 5A continuous output current, more sufficient power source for Raspberry Pi and Jetson Nano. Uninterruptible power supply module 3S.
Supports charging and power output at the same time, 3S * & 5V 5A output. If external power supply is unavailable, keeps the system running without any trouble.
Adapting various interfaces via cables, easy to integrate into mobile robots or industrial control equipment.I2C bus communication, monitoring the batt voltage, current, power in real time.
batt warning indicators,easy to check if the batt is connected correctly.(Warning:DO NOT connect the charger if the indicator lighted up,otherwise the protection circuit would be broken down).
Real time monitoring,monitoring the batt voltage, current and power via I2C.Safe and stable circuit design.Multi batt protection circuits:protection circuits for over charge/discharge, over current, short circuit, and reverse.Along with the equalizing charge feature, more safe and stable.
36,99 € AUF AMAZON
Geekworm
Geekworm Raspberry Pi UPS, X728 V2.5 (Max 5.1V 6A) 18650 UPS with Power Loss Detection & Auto On & Safe Shutdown & Buzzer for Raspberry Pi 5/Raspberry Pi 4/3B+/3B/2B
72
GUTE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#9
▼ Mehr anzeigen
▲ Weniger anzeigen
【Function】X728 provides max 5.1V 6000mA Power Backup, intelligent and safe power management, safe shutdown, auto power-on, full poweroff from software, RTC real- time clock, and a buzzer
【Support External Battery Holder】Can connect external battery holder to increase battery capacity
【How to Power】Power via X728 USB-C port: 5Vdc ±5%, ≥3A; Via X728 DC power jack : 5Vdc ±5%, ≥4A; Recommend Geekworm 20W 5V 4A USB C PSU (ASIN: B09J4V3RYK)
【Packing List】 X728 Expansion Board x 1, Screws Pack x 1 (Not include raspberry pi motherboard or batteries)
【Matching Case (Not included)】Refer to X728-C1 Metal Case (ASIN: B0FLXTJQT4)
50,99 € AUF AMAZON
Waveshare
Waveshare UPS Hat (B) for Raspberry Pi 5V Uninterruptible Power Supply 5A High Current with Pogo Pins Connector
65
GUTE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#10
▼ Mehr anzeigen
▲ Weniger anzeigen
Designed for Raspberry Pi series, compatible with Raspberry Pi 3 / 3B+ / 4B, etc.
I2C bus communication, monitoring the batt voltage, current, power, and remaining capacity in real time
Multi batt protection circuits: over charge/discharge protection, over current protection, short circuit protection, and reverse protection, along with the equalizing charge feature, more safe and stable
Onboard 5V regulator, up to 5A continuous output current, more sufficient power source for Raspberry Pi
5V USB output, convenient for powering other boards batt warning indicators, easy to check if the batt is connected correctly
31,99 € AUF AMAZON
raspberry ups
raspberry ups hat
raspberry pi ups
ups raspberry pi
raspberry zero ups
raspberry pi ups hat
ups hat raspberry pi
ups
raspberry pi 3 ups
raspberry pi 4 ups
#1 GEWINNER
