main logo

Waveshare Gps Hat

Die 10 besten Produkte von Juni 2025
Letzte Aktualisierung: 10. Juni 2025
Waveshare
Waveshare
Waveshare GSM/GPRS/GNSS HAT Expansion Board Compatible with Raspberry Pi,with Low-Power Consumption Based on SIM868 Compatible with Raspberry Pi 2B 3B Zero Zero W
Kostenloser Versand
star

99

MAXIMALE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#1 GEWINNER

  • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano; Supports SIM application toolkit: SAT Class 3, GSM 11.14 Release 99, USAT; Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)
  • Supports SMS, phone call, GPRS, DTMF, HTTP, FTP, MMS, email, etc.Support GPS, COMPASS, Glonass, LBS base station positioning, omni-positioning;
  • Onboard USB TO UART converter CP2102 for UART debugging; 6x LEDs for indicating the module working status; SIM card slot for 1.8V/3V SIM card
  • RTC with backup battery holder;Baudrate auto detection (1200bps ~115200bps); Control via AT commands (3GPP TS 27.007, 27.005, and SIMCOM enhanced AT Commands);
  • Supports SIM application toolkit: GSM 11.14 Release 99;
  • 39,99 € AUF AMAZON
Waveshare
Waveshare
Waveshare Raspberry Pi GSM/GPRS/GNSS Bluetooth HAT Expansion Board GPS Module with Low-Power Consumption Based on SIM868 Compatible with Raspberry Pi 2B 3B 4B Zero Zero W
star

96

BESTE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#2

  • Raspberry Pi connectivity, compatible with Raspberry Pi 2B/3B/3B+/Zero/Zero W
  • Supports SMS, phone call, GPRS, DTMF, HTTP, FTP, MMS, email, etc.
  • Support GPS, COMPASS, Glonass, LBS base station positioning, omni-positioning；available to start the gps using code
  • Bluetooth 3.0, supports data transferring through Bluetooth
  • Download link: www.waveshare.com/wiki/GSM/GPRS/GNSS_HAT
  • 38,40 € AUF AMAZON
Waveshare
Waveshare
Waveshare SX1262 868/915M LoRaWAN Node Module, LoRaWAN/GNSS Expansion Board for Raspberry Pi, with L76K Module, Sucker Antenna and GPS Antenna, Suitable for HF Band, for LoRaWAN Networks Building
Kostenloser Versand
star

93

TOP QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#3

  • [SX1262 868/915M LoRaWAN/GNSS HAT]Suitable for HF band, comes with a magnetic CB antenna, a GPS antenna and IPEX adapter cables (2PCS)
  • This series of products are LoRa modules using the new generation of SX1262 RF chip, features higher power efficiency, longer communication distance and stronger anti-interference than SX1278. Suitable for Sub-GHz frequency band network, and is available in HF (850~930MHz) frequency band. Combined with a LoRa gateway, it can be connected to servers such as TTN to build a LoRaWAN network
  • In addition to the basic LoRaWAN, it also onboards L76K module with GPS/BD support, provides accurate clock and location info for node module. Onboard button cell holder, supports ML1220 rechargeable cell(not included), for preserving ephemeris information and hot starts
  • Standard Pi 40PIN GPIO header, compatible with Raspberry Pi series boards. Onboard 4 LED indicators for module operating status
  • Provide complete supporting documentation manuals (C example programs and user manuals, etc.). Please contact our 24-hour customer service through 'buyer/seller message' to obtain relevant manuals
  • 36,99 € AUF AMAZON
IBest
IBest
IBest waveshare L76X Multi-GNSS HAT GPS BDS QZSS Board Expansion with GPS Antenna for Raspberry Pi, 4800~115200bps UART Communication Baudrate, GPS L1 BD2 B1 Band, Support DGPS SBAS
star

90

HOHE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#4

  • L76X Multi-GNSS HAT for Raspberry Pi, Supports GPS, BDS, QZSS ,it is an easy way to enable global positioning function for your Raspberry Pi.
  • EASY, self track prediction technology, help quick positioning.AlwaysLocate, intelligent controller of periodic mode for power saving
  • Supports DGPS, SBAS (WAAS/EGNOS/MSAS/GAGAN).UART communication baudrate: 4800~115200bps (9600bps by default)
  • Onboard battery holder, supports ML1220 rechargeable battery, for preserving ephemeris information and hot starts.4x LEDs for indicating the module working status
  • Comes with development resources and manual (examples for Raspberry Pi/Arduino/STM32)
  • 30,99 € AUF AMAZON
Waveshare
Waveshare
Waveshare LC29H Series Dual-Band GPS Module for Raspberry Pi, Dual-Band L1+L5 Positioning Technology, Supports RTK Base, Can Establish a Base Station to Transmit Correction Data
Kostenloser Versand
star

83

SICHERE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#5

  • Supports GNSS raw observation and correction data output, suitable for establishing RTK base station
  • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano Supports simultaneous tracking of L1+L5 dual-band satellite signals, reducing multipath effects in urban canyons and improving positioning accuracy
  • Supports concurrent receiving of multi-GNSS systems (GPS, BDS, GLONASS, Galileo and QZSS) while maintaining low power consumption
  • Built-in low noise amplifier and acoustic surface filter to realize -165dBm high sensitivity and enhance anti-interference performance Supports multi-frequency active interference cancellation, effectively suppressing or eliminating narrowband signal (WiFi/2/3/4/5G) interference to ensure navigation accuracy
  • A-GNSS (Assisted GNSS) support, reducing the time to first fix (TTFF) with cold start when powered on to 5 seconds Support QGNSS software, easy to set various module functions
  • 78,99 € AUF AMAZON
Waveshare
Waveshare
Waveshare 4G/3G/2G/GSM/GPRS/GNSS Hat for Raspberry Pi 4 Jetson Nano Based on SIM7600E-H Supports LTE CAT4 for Downlink Data Transfer
Kostenloser Versand
star

80

GUTE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#6

  • The SIM7600E-H 4G HAT is a 4G/3G/2G communication and GNSS positioning module, which supports LTE CAT4 up to 150Mbps for downlink data transfer. it is pretty low power consumption.
  • You can connect this 4G module with computer to surf the Internet, or attach it onto Raspberry Pi to enable functions like 4G high speed connection, wireless communication, making telephone call, sending SMS, global positioning, etc.
  • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano. Supports SIM application toolkit: SAT Class 3, GSM 11.14 Release 99, USAT.
  • Baudrate: 300bps ~ 4Mbps (default: 115200bps). Autobauding baudrate: 9600bps ~ 115200bps. Control via AT commands (3GPP TS 27.007, 27.005, and V.25TER command set).
  • Supports dial-up, telephone call, SMS , mail, TCP, UDP, DTMF, HTTP, FTP, etc. Supports GPS, BeiDou, Glonass, LBS base station positioning.
  • 85,99 € AUF AMAZON
Waveshare
Waveshare
Waveshare GNSS L1+L5 Dual-Frequency Active Antenna, SMA-J Connector, Support BD/GPS/Galileo/QZSS/IRNSS, for Raspberry Pi Board and GPS HAT
Kostenloser Versand
star

78

GUTE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#7

  • GNSS L1+L5 dual frequency active positioning antenna, SMA-J interface, supporting multiple satellite positioning systems
  • 2dBi gain, 3m long, magnetic base, supporting multiple satellite positioning systems such as BD/GPS/Galileo/QZSS/IRNSS
  • Suitable for smart homes, smart agriculture, and high-precision maps
  • 28,99 € AUF AMAZON
Waveshare
Waveshare
Waveshare LC29H Series Dual-Band GPS Module for Raspberry Pi, Dual-Band L1+L5 Positioning Technology, Supports RTK Rover to Realize High-Precision Centimeter-Level Positioning
Kostenloser Versand
star

78

GUTE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#8

  • Supports fast convergence dual-band RTK centimeter-level positioning, suitable for high-precision positioning of terminal devices
  • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano Supports simultaneous tracking of L1+L5 dual-band satellite signals, reducing multipath effects in urban canyons and improving positioning accuracy
  • Supports concurrent receiving of multi-GNSS systems (GPS, BDS, GLONASS, Galileo and QZSS) while maintaining low power consumption
  • Built-in low noise amplifier and acoustic surface filter to realize -165dBm high sensitivity and enhance anti-interference performance Supports multi-frequency active interference cancellation, effectively suppressing or eliminating narrowband signal (WiFi/2/3/4/5G) interference to ensure navigation accuracy
  • A-GNSS (Assisted GNSS) support, reducing the time to first fix (TTFF) with cold start when powered on to 5 seconds Support QGNSS software, easy to set various module functions
  • 81,99 € AUF AMAZON
ELTY
ELTY
ELTY HAT für Raspberry Pi GPS-Empfänger MAX-M8Q Waveshare 18233
star

74

GUTE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#9

  • Gleichzeitige Empfang von bis zu 3 Arten von GNSS Satellitenanlagen mit GPS, Beidou, Galileo und GLONASS bei geringem Stromverbrauch
  • Unterstützt DDC-Schnittstelle (I2C-kompatibel): bis zu 400 KHz (max), Eingebauter Batteriehalter, unterstützt ML1220 Akku, zum Speichern von Efemerden und Heißstart
  • Unterstützung von Erweiterungssystemen, einschließlich SBAS, QZSS, IMES, D-GPS, zur Verbesserung der Positionierung des Services
  • Unterstützung A-GNSS (Assisted GNSS), verkürzt die Zeit der ersten Positionierung nach dem Einschalten, verbessert die Aktionsempfindlichkeit
  • Hohe Empfindlichkeit der Navigation (-167dBm ) und einzigartige Fähigkeit zur Prävention von Spoofing und Anti-Interferenz, unterstützt Geo-Fencing
  • Unterstützt U-Center, einfach zu konfigurieren, Bedienungsbeispiele für Raspberry Pi / Jetson Nano / Arduino / STM32
  • Standard Raspberry Pi 40PIN GPIO Anschluss, unterstützt Raspberry Pi Serie, Jetson Nano
  • Integrierter USB TO UART CP2102 Konverter für serielle Debugging
  • UART und I2C Modulschnittstelle zum Kombinieren mit Host-Platten wie Arduino / STM32
  • Übertragungsgeschwindigkeitsbereich: 4800 ~ 921600bps (standardmäßig 9600bps), 4x LEDs zur Anzeige des Betriebs des Moduls
  • 40,88 € AUF AMAZON
LUCKFOX
LUCKFOX
LUCKFOX 4G HAT for Raspberry Pi, Based on Waveshare SIM7600E-H, Enabling LTE Cat-4 4G/3G/2G Communication & GNSS Positioning, Compatible with Raspberry Pi Series Boards/Jetson Nano
Kostenloser Versand
star

69

GUTE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#10

  • Equipped with standard Pi 40PIN GPIO expansion head, and compatible with Raspberry Pi series boards/Jetson Nano. Support dialing, telephone calling, SMS/TCP/UDP/DTMF/HTTP/FTP, etc
  • Support GPS/BeiDou/Glonass/GALILEO/QZSS/LBS base station positioning. The onboard USB interface is used to test AT commands, obtain GPS positioning data, etc. On board 2102 USB to UART converter for serial debugging. Disconnect the UART control pin for connecting STM32 and other motherboards
  • SIM card slot, supporting 1.8V/3V SIM card. TF card slot, used to store files, messages and other data. Car audio jack and audio decoder for making calls. 2 LED indicators, easy to monitor operation status
  • On board voltage converter, the working voltage can be configured as 3.3V or 5V through jumpers. Baudrate: 300bps ~ 4Mbps (default: 115200bps). Autobauding baudrate: 9600bps ~ 115200bps. Control via AT command (3GPP TS 27.007, 27.005 and V.25TER command set)
  • Support SIM application kit: SAT Class 3, GSM 11.14 Release 99, USAT. Provide online development resources and manuals (examples for Raspberry Pi/Jetson Nano/STM32). Please ask 24-hour customer service for relevant manual
  • 75,99 € AUF AMAZON
waveshare gps waveshare hat waveshare pi hat waveshare poe hat waveshare lte hat waveshare epaper hat waveshare pico gps waveshare ups hat