main logo

Waveshare Ups Hat

Die 10 besten Produkte von Dezember 2025
Letzte Aktualisierung: 10. Dezember 2025
Waveshare
Waveshare
Waveshare UPS Hat (C) for Raspberry Pi Zero 5V Uninterruptible Power Supply Multi Batt Protection Circuits(Batt is not Included)
star

98

MAXIMALE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#1 GEWINNER

  • Power Your Pi Zero Seamlessly From Power Connection OR The Backup batt. Supports Recharging And Regulated 5V Output At The Same Time, I2C Monitoring.
  • Onboard spring pogo pins for connecting with Raspberry Pi Zero series boards. Li-po batt recharge chip, with dynamic path management, more stable power supply.
  • Voltage boost chip, providing regulated 5V power output. I2C bus communication, monitoring the batt voltage, current, power, and remaining capacity in real time.
  • Multi batt protection circuits: over charge/discharge protection, over current protection, and short circuit protection, more safe and stable.
  • Recharging indicator for monitoring the batt operating status.
  • 28,99 € AUF AMAZON
Waveshare
Waveshare
Waveshare UPS HAT (E) for Raspberry Pi 5/4B/3B+, Supports 4× 21700 Li Batt (NOT Included), Bi-Directional Fast Charging, 5V 6A Output, Pogo Pins Connector
star

97

BESTE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#2

  • The UPS HAT (E) is an uninterruptible power supply (UPS) expansion board specially designed for Raspberry Pi series. Onboard batt fuel gauge IC, fast charging chip and high-power buck chip to realize higher power input and output. Supports monitoring the operating state of the HAT via the I2C interface.
  • Adopts pogo pins connector design, compatible with Raspberry Pi 5 / 4B / 3B+. Supports displaying batt level on the system, easy to check the operating state of the HAT
  • Onboard Type-C port with bi-directional fast charging, supports multiple charging input / output protocols such as PD3.0, up to 40W charging power. Onboard high-power buck chip for stable 5V 6A power output
  • Onboard batt fuel gauge IC for reading batt voltage, current, power, remaining capacity and other parameters. Onboard MCU management, supports detecting power connection and booting the Pi
  • Supports I2C bus communication for monitoring the operating status of Type-C port and batt in real time. Supports 4× 21700 Li batt (NOT included), larger capacity and longer batt life. Can provide with online development resources and manual
  • 44,99 € AUF AMAZON
Waveshare
Waveshare
Waveshare UPS HAT (D) for Raspberry Pi, Supports 21700 Li Batt (NOT Included), 5V Uninterruptible Power Supply, Pogo Pins Connector, Supports Charging & Power Output at The Same Time
star

96

BESTE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#3

  • Adopts pogo pins connector design, compatible with Raspberry Pi 3 / 3B+ / 4B, etc. I2C bus communication, monitoring the batt voltage, current, power, and remaining capacity in real time
  • Onboard Li batt charging chip, with dynamic path management, more stable power supply. Onboard MCU management, supports detecting power connection and booting the Pi
  • Multi batt protection circuits: over charge/discharge protection, over current protection, short circuit protection, more safe and stable
  • Onboard LED indicators for monitoring the batt operating status. Supports displaying batt level on the system, easy to check the batt remaining capacity
  • Onboard boost converter chip for stable 5V power output. Provide with online development resources and manual(Obtain from 24hour customer service)
  • 35,99 € AUF AMAZON
Waveshare
Waveshare
Waveshare UPS HAT for Raspberry Pi, 5V Uninterruptible Power Supply, Multi Batt Protection Circuits, Power Your Pi Seamlessly from Power Connection OR The Backup Batt
star

92

TOP QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#4

  • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards like Raspberry Pi 4B/3B+/3B/2B/B+/A+/Zero/Zero W/Zero WH
  • I2C bus communication, monitoring the batt voltage, current, power, and remaining capacity in real time
  • Multi batt protection circuits: over charge/discharge protection, over current protection, short circuit protection, and reverse protection, along with the equalizing charge feature, more safe and stable
  • Onboard 5 V regulator, up to 2.5 A continuous output current. 5 V USB output, convenient for powering other boards
  • batt warning indicators, easy to check if the batt is connected correctly. Comes with development resources and manual (English language not guaranteed)
  • 33,99 € AUF AMAZON
Waveshare
Waveshare
Waveshare UPS Hat (B) for Raspberry Pi 5V Uninterruptible Power Supply 5A High Current with Pogo Pins Connector
star

86

SICHERE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#5

  • Designed for Raspberry Pi series, compatible with Raspberry Pi 3 / 3B+ / 4B, etc.
  • I2C bus communication, monitoring the batt voltage, current, power, and remaining capacity in real time
  • Multi batt protection circuits: over charge/discharge protection, over current protection, short circuit protection, and reverse protection, along with the equalizing charge feature, more safe and stable
  • Onboard 5V regulator, up to 5A continuous output current, more sufficient power source for Raspberry Pi
  • 5V USB output, convenient for powering other boards batt warning indicators, easy to check if the batt is connected correctly
  • 31,99 € AUF AMAZON
Waveshare
Waveshare
Waveshare UPS Hat Compatible with Raspberry Pi 5V Uninterruptible Power Supply Multi Batt Protection Circuits Charge and Power Output at The Same Time
star

82

SICHERE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#6

  • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards. Comes with development resources and manual.
  • I2C bus communication, monitoring the batt voltage, current, power, and remaining capacity in real time. When the voltage dips too low, it is possible to save files properly and then shutdown the system by software, to avoid any data loss.
  • Multi batt protection circuits: over charge/discharge protection, over current protection, short circuit protection, and reverse protection, along with the equalizing charge feature, more safe and stable.
  • Onboard 5V regulator, up to 2.5A continuous output current 5V USB output, convenient for powering other boards. batt warning indicators, easy to check if the batt is connected correctly.
  • It is able to charge the batt and provide power output at the same time from external power supply. Automatically switch over to batt output if external power supply is unavailable, keeps the system running without any trouble.
  • 33,99 € AUF AMAZON
Coolwell
Coolwell
UPS HAT (E) for Raspberry Pi 5 / 4B / 3B+, Etc. 5V 6A Output USB-C Port Supports Bi-Directional Fast Charging, Pogo Pins Connector for Raspberry Pi UPS(No Battery)
star

79

GUTE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#7

  • For Raspberry Pi 5 UPS HAT, onboard Type-C port with bi-directional fast charging, supports multiple charging input / output protocols such as PD3.0, up to 40W charging power
  • UPS HAT For Raspberry Pi 5, onboard battery fuel gauge IC for reading battery voltage, current, power, remaining capacity and other parameters.
  • Supports I2C bus communication for monitoring the operating status of Type-C port and batteries in real time; Supports 4× 21700 Li batteries (NOT included), larger capacity and longer battery life
  • UPS HAT for Raspberry Pi, onboard high-power buck chip for stable 5V 6A power output; Onboard MCU management, supports detecting power connection and booting the Raspberry Pi
  • Supports displaying battery level on the system, easy to check the operating state of the HAT; Comes with online development resources and manual
  • 43,19 € AUF AMAZON
Waveshare
Waveshare
Waveshare UPS USV HAT 5V Unterbrechungsfreie Stromversorgung Modul für Raspberry Pi 4B/3B+/3B, bis zu 5A Strom, Pogo Pins Anschluss, Onboard 5V Regler und Multi Batterie Schutzschaltungen, I2C Bus
star

78

GUTE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#8

  • 【5V UPS HAT (B) for Raspberry Pi】Uninterruptible Power Supply designed for Raspberry Pi series, compatible with Raspberry Pi 3 / 3B+ / 4B, etc. powering the Raspberry Pi via Pogo Pins, without using any GPIO resource
  • 【Real Time Monitoring】I2C bus communication, monitoring the batteries voltage, current, power, and remaining capacity in real-time via I2C
  • 【Safe and Stable Circuit Design】Multi battery protection circuits for over charge/discharge, over current, short circuit, and reverse, along with the equalizing charge feature, more safe and stable
  • 【5V USB Output As Well】5V USB output, convenient for powering other boards
  • 【Battery Warning Indicators】Easy to check if the battery is connected correctly
  • 34,99 € AUF AMAZON
Coolwell
Coolwell
UPS HAT for Raspberry Pi Series Boards Support 5V Uninterruptible Power Supply Charge and Power Output at The Same Time Real Time Monitoring
star

74

GUTE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#9

  • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards
  • I2C bus communication, monitoring the batteries voltage, current, power, and remaining capacity in real time; Batteries warning indicators, easy to check if the battery is connected correctly
  • Multi battery protection circuits: over charge/discharge protection, over current protection, short circuit protection, and reverse protection, along with the equalizing charge feature, more safe and stable
  • Onboard 5V regulator, up to 2.5A continuous output current; 5V USB output, convenient for powering other boards
  • Comes with development resources and manual: www.waveshare.com/wiki/UPS_HAT
  • 33,95 € AUF AMAZON
Waveshare
Waveshare
Waveshare Uninterruptible Power Supply UPS Module Supports Charging and Power Output at The Same Time 3S & 5V 5A Output
star

67

GUTE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#10

  • Onboard 5V regulator, up to 5A continuous output current, more sufficient power source for Raspberry Pi and Jetson Nano. Uninterruptible power supply module 3S.
  • Supports charging and power output at the same time, 3S * & 5V 5A output. If external power supply is unavailable, keeps the system running without any trouble.
  • Adapting various interfaces via cables, easy to integrate into mobile robots or industrial control equipment.I2C bus communication, monitoring the batt voltage, current, power in real time.
  • batt warning indicators,easy to check if the batt is connected correctly.(Warning:DO NOT connect the charger if the indicator lighted up,otherwise the protection circuit would be broken down).
  • Real time monitoring,monitoring the batt voltage, current and power via I2C.Safe and stable circuit design.Multi batt protection circuits:protection circuits for over charge/discharge, over current, short circuit, and reverse.Along with the equalizing charge feature, more safe and stable.
  • 36,99 € AUF AMAZON
waveshare ups hat c waveshare ups hat b waveshare hat ups hat waveshare ups hat raspberry pi waveshare pi hat waveshare epaper hat waveshare poe hat waveshare lora hat waveshare gps hat