main logo

Waveshare Gps

Die 10 besten Produkte von Juni 2025
Letzte Aktualisierung: 8. Juni 2025
Waveshare
Waveshare
Waveshare GSM/GPRS/GNSS HAT Expansion Board Compatible with Raspberry Pi,with Low-Power Consumption Based on SIM868 Compatible with Raspberry Pi 2B 3B Zero Zero W
Kostenloser Versand
star

99

MAXIMALE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#1 GEWINNER

  • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano; Supports SIM application toolkit: SAT Class 3, GSM 11.14 Release 99, USAT; Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)
  • Supports SMS, phone call, GPRS, DTMF, HTTP, FTP, MMS, email, etc.Support GPS, COMPASS, Glonass, LBS base station positioning, omni-positioning;
  • Onboard USB TO UART converter CP2102 for UART debugging; 6x LEDs for indicating the module working status; SIM card slot for 1.8V/3V SIM card
  • RTC with backup battery holder;Baudrate auto detection (1200bps ~115200bps); Control via AT commands (3GPP TS 27.007, 27.005, and SIMCOM enhanced AT Commands);
  • Supports SIM application toolkit: GSM 11.14 Release 99;
  • 39,99 € AUF AMAZON
Waveshare
Waveshare
Waveshare LC76G Multi-GNSS Module Compatible with Raspberry PI, Supports GPS, BDS, GLONASS, Galileo, QZSS,Provides Multi-Platform Resources and Tutorials for Secondary Development and Integration
star

98

MAXIMALE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#2

  • Supports Multi-GNSS systems: GPS, BeiDou (BDS), GLONASS, Galileo, and QZSS.Supports UART and I2C communication.
  • Compatible with multiple platforms.Compatible with Raspberry Pi/Raspberry Pi Pico/Jetson Nano/ESP32/Arduino,provide demos and user manuals, easier to develop and integrate, and better expansibility.
  • For more product parameters, please refer to the picture introduction or contact store customer service through the Amazon.
  • 24,99 € AUF AMAZON
Waveshare
Waveshare
Waveshare LC29H Series Dual-Band GPS Module for Raspberry Pi, Dual-Band L1+L5 Positioning Technology, Supports RTK Base, Can Establish a Base Station to Transmit Correction Data
Kostenloser Versand
star

94

TOP QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#3

  • Supports GNSS raw observation and correction data output, suitable for establishing RTK base station
  • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano Supports simultaneous tracking of L1+L5 dual-band satellite signals, reducing multipath effects in urban canyons and improving positioning accuracy
  • Supports concurrent receiving of multi-GNSS systems (GPS, BDS, GLONASS, Galileo and QZSS) while maintaining low power consumption
  • Built-in low noise amplifier and acoustic surface filter to realize -165dBm high sensitivity and enhance anti-interference performance Supports multi-frequency active interference cancellation, effectively suppressing or eliminating narrowband signal (WiFi/2/3/4/5G) interference to ensure navigation accuracy
  • A-GNSS (Assisted GNSS) support, reducing the time to first fix (TTFF) with cold start when powered on to 5 seconds Support QGNSS software, easy to set various module functions
  • 78,99 € AUF AMAZON
Waveshare
Waveshare
Waveshare Raspberry Pi GSM/GPRS/GNSS Bluetooth HAT Expansion Board GPS Module with Low-Power Consumption Based on SIM868 Compatible with Raspberry Pi 2B 3B 4B Zero Zero W
star

90

HOHE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#4

  • Raspberry Pi connectivity, compatible with Raspberry Pi 2B/3B/3B+/Zero/Zero W
  • Supports SMS, phone call, GPRS, DTMF, HTTP, FTP, MMS, email, etc.
  • Support GPS, COMPASS, Glonass, LBS base station positioning, omni-positioning；available to start the gps using code
  • Bluetooth 3.0, supports data transferring through Bluetooth
  • Download link: www.waveshare.com/wiki/GSM/GPRS/GNSS_HAT
  • 38,40 € AUF AMAZON
Waveshare
Waveshare
Waveshare LC29H Series Dual-Band GPS Module for Raspberry Pi, Dual-Band L1+L5 Positioning Technology, Supports RTK Rover to Realize High-Precision Centimeter-Level Positioning
Kostenloser Versand
star

84

SICHERE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#5

  • Supports fast convergence dual-band RTK centimeter-level positioning, suitable for high-precision positioning of terminal devices
  • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano Supports simultaneous tracking of L1+L5 dual-band satellite signals, reducing multipath effects in urban canyons and improving positioning accuracy
  • Supports concurrent receiving of multi-GNSS systems (GPS, BDS, GLONASS, Galileo and QZSS) while maintaining low power consumption
  • Built-in low noise amplifier and acoustic surface filter to realize -165dBm high sensitivity and enhance anti-interference performance Supports multi-frequency active interference cancellation, effectively suppressing or eliminating narrowband signal (WiFi/2/3/4/5G) interference to ensure navigation accuracy
  • A-GNSS (Assisted GNSS) support, reducing the time to first fix (TTFF) with cold start when powered on to 5 seconds Support QGNSS software, easy to set various module functions
  • 81,99 € AUF AMAZON
Waveshare
Waveshare
Waveshare GPS External Antenna Ceramics with Amplifier (Include IPX to SMA Adapter Wire)
Kostenloser Versand
star

82

SICHERE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#6

  • This item includes * IPX to SMA Adapter Wire
  • CABLE MATERIAL: RG174 96-weave copper with tin coating
  • VIBRATION: 10 to 55Hz with 1.5mm amplitude 2hours
  • CENTER FREQUENCY: 1575±1MHz
  • EX-BAND ATTENUATION: 35dB@CF±50MHz/50dB@CF±100MHz
  • 12,99 € AUF AMAZON
Waveshare
Waveshare
Waveshare ESP32-S3 1.75inch AMOLED Round Touch Display Development Board(Without Case & GPS), 32-Bit LX7 2-Core Processor, 466x466, QSPI Interface, Dual Digital Microphones Array, ESP32 with Display
star

78

GUTE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#7

  • The ESP32-S3-Touch-AMOLED-1.75(Standard version) is a high-performance, highly integrated MCU board designed by Waveshare. It is compact in size, onboard 1.75inch AMOLED capacitive touch display, power management IC, 6-axis sensor (3-axis accelerometer and 3-axis gyroscope), RTC chip, low power audio codec, echo cancellation circuit, and so on, which makes it easy for you to develop and integrate into the products quickly
  • Equipped with ESP32-S3R8 Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency. Supports 2.4GHz Wi-Fi (802.11 b/g/n) and BT 5 (LE), with onboard antenna. Built in 512KB of SRAM and 384KB ROM, with onboard 8MB PSRAM and an external 16MB Flash memory. Type-C connector, improving device compatibility, easier to use. Onboard PWR and BOOT programmable buttons for easy custom function development
  • Onboard 1.75inch AMOLED capacitive touch display for clear color picture display, 466x466 resolution, 16.7M color. Built-in CO5300 display driver and CST9217 capacitive touch chip, using QSPI and I2C communication respectively, effectively saving the IO resources. Equipped with dual digital microphones array for audio algorithms such as noise reduction and echo cancellation, suitable for accurate speech recognition and near-field / far-field voice wake-up applications
  • Onboard QMI8658 6-axis IMU (3-axis accelerometer and 3-axis gyroscope) for detecting motion gesture, counting steps, etc. Onboard PCF85063 RTC chip, powered by Li battery(NOT Included) through AXP2101 chip for uninterrupted power supply. Onboard 3.7V MX1.25 Li battery recharge/discharge header. Onboard 8PIN 2.54mm header adapting 3xGPIO and 1xUART, and reserved pads of I2C and 3xexpanded IO interfaces, for connecting peripherals and debugging
  • Onboard TF card slot for extended storage and fast data transfer, suitable for applications such as data recording and media playback, simplifying circuit design. Adopts AXP2101 IC for efficient power management, supports multiple voltage outputs, battery charging, battery management, and battery life optimization, etc. Adopts AMOLED screen, featuring advantages of high contrast, wide viewing angle, rich colors, fast response, thinner design, and low power consumption, etc
  • 41,99 € AUF AMAZON
ELTY
ELTY
ELTY HAT für Raspberry Pi GPS-Empfänger MAX-M8Q Waveshare 18233
star

77

GUTE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#8

  • Gleichzeitige Empfang von bis zu 3 Arten von GNSS Satellitenanlagen mit GPS, Beidou, Galileo und GLONASS bei geringem Stromverbrauch
  • Unterstützt DDC-Schnittstelle (I2C-kompatibel): bis zu 400 KHz (max), Eingebauter Batteriehalter, unterstützt ML1220 Akku, zum Speichern von Efemerden und Heißstart
  • Unterstützung von Erweiterungssystemen, einschließlich SBAS, QZSS, IMES, D-GPS, zur Verbesserung der Positionierung des Services
  • Unterstützung A-GNSS (Assisted GNSS), verkürzt die Zeit der ersten Positionierung nach dem Einschalten, verbessert die Aktionsempfindlichkeit
  • Hohe Empfindlichkeit der Navigation (-167dBm ) und einzigartige Fähigkeit zur Prävention von Spoofing und Anti-Interferenz, unterstützt Geo-Fencing
  • Unterstützt U-Center, einfach zu konfigurieren, Bedienungsbeispiele für Raspberry Pi / Jetson Nano / Arduino / STM32
  • Standard Raspberry Pi 40PIN GPIO Anschluss, unterstützt Raspberry Pi Serie, Jetson Nano
  • Integrierter USB TO UART CP2102 Konverter für serielle Debugging
  • UART und I2C Modulschnittstelle zum Kombinieren mit Host-Platten wie Arduino / STM32
  • Übertragungsgeschwindigkeitsbereich: 4800 ~ 921600bps (standardmäßig 9600bps), 4x LEDs zur Anzeige des Betriebs des Moduls
  • 40,88 € AUF AMAZON
Waveshare
Waveshare
Waveshare ESP32-S3 1.75inch AMOLED Round Touch Display Development Board(GPS Version, No Case), 32-Bit LX7 2-Core Processor, 466x466, QSPI Interface, 2 Digital Microphones Array, ESP32 with Display
star

75

GUTE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#9

  • The ESP32-S3-Touch-AMOLED-1.75-G(GPS version, with built-in LC76G module, comes with a GNSS ceramic antenna) is a high-performance, highly integrated MCU board designed by Waveshare. It is compact in size, onboard 1.75inch AMOLED capacitive touch display, power management IC, 6-axis sensor (3-axis accelerometer and 3-axis gyroscope), RTC chip, low power audio codec, echo cancellation circuit, and so on, which makes it easy for you to develop and integrate into the products quickly
  • Equipped with ESP32-S3R8 Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency. Supports 2.4GHz Wi-Fi (802.11 b/g/n) and BT 5 (LE), with onboard antenna. Built in 512KB of SRAM and 384KB ROM, with onboard 8MB PSRAM and an external 16MB Flash memory. Type-C connector, improving device compatibility, easier to use. Onboard PWR and BOOT programmable buttons for easy custom function development
  • Onboard 1.75inch AMOLED capacitive touch display for clear color picture display, 466x466 resolution, 16.7M color. Built-in CO5300 display driver and CST9217 capacitive touch chip, using QSPI and I2C communication respectively, effectively saving the IO resources. Equipped with dual digital microphones array for audio algorithms such as noise reduction and echo cancellation, suitable for accurate speech recognition and near-field / far-field voice wake-up applications
  • Onboard QMI8658 6-axis IMU (3-axis accelerometer and 3-axis gyroscope) for detecting motion gesture, counting steps, etc. Onboard PCF85063 RTC chip, powered by Li battery(NOT Included) through AXP2101 chip for uninterrupted power supply. Onboard 3.7V MX1.25 Li battery recharge/discharge header. Onboard 8PIN 2.54mm header adapting 3xGPIO and 1xUART, and reserved pads of I2C and 3xexpanded IO interfaces, for connecting peripherals and debugging
  • Onboard TF card slot for extended storage and fast data transfer, suitable for applications such as data recording and media playback, simplifying circuit design. Adopts AXP2101 IC for efficient power management, supports multiple voltage outputs, battery charging, battery management, and battery life optimization, etc. Adopts AMOLED screen, featuring advantages of high contrast, wide viewing angle, rich colors, fast response, thinner design, and low power consumption, etc
  • 53,99 € AUF AMAZON
Waveshare
Waveshare
Waveshare 4G/3G/2G/GSM/GPRS/GNSS Hat for Raspberry Pi 4 Jetson Nano Based on SIM7600E-H Supports LTE CAT4 for Downlink Data Transfer
Kostenloser Versand
star

67

GUTE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#10

  • The SIM7600E-H 4G HAT is a 4G/3G/2G communication and GNSS positioning module, which supports LTE CAT4 up to 150Mbps for downlink data transfer. it is pretty low power consumption.
  • You can connect this 4G module with computer to surf the Internet, or attach it onto Raspberry Pi to enable functions like 4G high speed connection, wireless communication, making telephone call, sending SMS, global positioning, etc.
  • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano. Supports SIM application toolkit: SAT Class 3, GSM 11.14 Release 99, USAT.
  • Baudrate: 300bps ~ 4Mbps (default: 115200bps). Autobauding baudrate: 9600bps ~ 115200bps. Control via AT commands (3GPP TS 27.007, 27.005, and V.25TER command set).
  • Supports dial-up, telephone call, SMS , mail, TCP, UDP, DTMF, HTTP, FTP, etc. Supports GPS, BeiDou, Glonass, LBS base station positioning.
  • 85,99 € AUF AMAZON
waveshare gps hat waveshare pico gps waveshare