Raspberry Pi 5 Power Hat
Die 10 besten Produkte von Dezember 2025
Letzte Aktualisierung:
8. Dezember 2025
Waveshare
POE HAT (F) for Raspberry Pi 5, 802.3af/at-Compliant, Power Over Ethernet HAT Expansion Board for Raspberry Pi 5, with Metal Heatsink,Onboard Cooling Fan
Kostenloser Versand
98
MAXIMALE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#1 GEWINNER
▼ Mehr anzeigen
▲ Weniger anzeigen
POE HAT with standard Raspberry Pi 40PIN GPIO header, compatible with Raspberry Pi 5
By using this small HAT and some proper 802.3af/at-compliant power sourcing equipments, it is possible to provide both network connection and power supply for your Raspberry Pi in only one Ethernet cable.
PoE (Power Over Ethernet) capability,IEEE 802.3af/at-compliant.x
Fully isolated switched-mode power supply (SMPS)
Onboard high speed active cooling fan, with metal heatsink, better heat dissipation
29,75 € AUF AMAZON
GeeekPi
GeeekPi P33 M.2 NVME M-Key PoE+ Hat für Raspberry Pi 5, mit offiziellem Raspberry Pi 5 Active Cooler, Unterstützung M.2 NVMe SSD 2230 2242 2260 2280
Kostenloser Versand
98
MAXIMALE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#2
▼ Mehr anzeigen
▲ Weniger anzeigen
Kompatibilität: Dieses Set enthält einen P33 M.2 NVME M-Key PoE+ HAT und einen offiziellen Raspberry Pi Active Cooler, der speziell für das neueste Raspberry Pi 5-Modell entwickelt wurde, um optimale Leistung und Kompatibilität zu gewährleisten. für P33 mit Aluminium Case Kit, ASIN: B0DMW98LBR
Unterstützung für Hochgeschwindigkeits-NVMe-SSDs: Die HAT-Platine unterstützt M.2-NVMe-SSDs für blitzschnellen Datenzugriff und -speicherung
M.2-Schnittstelle: Nutzen Sie die PCIe-Schnittstelle für Hochleistungskommunikation zwischen SSD und Raspberry Pi.
PoE HAT Design: Vereinfachen Sie die Stromversorgung mit Power over Ethernet, eliminieren Sie die Notwendigkeit für zusätzliche Stromkabel.
Stromeingang: Ethernet (PoE+) 802.3at-Protokoll, bis zu 25,5 W
39,99 € AUF AMAZON
GeeekPi
GeeekPi PD Power Expansion Board for Raspberry Pi 5,Enhanced Power Delivery & Automatic Startup for Raspberry Pi 5 4GB/8GB
16% Rabatt
Kostenloser Versand
93
TOP QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#3
▼ Mehr anzeigen
▲ Weniger anzeigen
Compact and Compatible --- Designed specifically for the Raspberry Pi 5, ensuring seamless compatibility and a compact form factor.
Always-ON Switch --- Default State:Disabled;Functionality: Requires manual activation by pressing the PowerON button for power supply during each startup.
Automatic Startup --- Supports automatic startup of the Raspberry Pi upon power restoration, enhancing user convenience.
Manual Power Control --- Long-press the PowerON switch for shutdown when the Raspberry Pi is in a powered-on state.
Versatile Power Management --- Flexibility in choosing power input sources and output options for diverse applications.
25,18 € AUF AMAZON
Waveshare
Waveshare PoE Power Over Ethernet HAT (F) Compatibele with Raspberry Pi 5 / cm 5, High Power, Onboard Cooling Fan, with Metal Heatsink, Supports 802.3af/at Network Standard
Kostenloser Versand
91
HOHE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#4
▼ Mehr anzeigen
▲ Weniger anzeigen
The PoE HAT (F) is a 802.3af/at-compliant Power Over Ethernet accessory for the Raspberry Pi 5. By using this small HAT and some proper 802.3af/at-compliant power sourcing equipments, it is possible to provide both network connection and power supply for your Raspberry Pi in only one Ethernet cable.
Standard Raspberry Pi 40PIN GPIO header, supports Raspberry Pi 5 / CM 5
PoE (Power Over Ethernet) capability,IEEE 802.3af/at-compliant Fully isolated switched-mode power supply (SMPS)
Onboard high speed active cooling fan, with metal heatsink, better heat dissipation
Provide e-user manual, please check the manual carefully before using!
30,99 € AUF AMAZON
Waveshare
Power Over Ethernet POE HAT für Raspberry Pi 5, IEEE 802.3af/at Konformer PoE HAT für Pi 5, 5V 5A Ausgang, Kompatibel mit Raspberry Pi 5 Offizielles Gehäuse
Kostenloser Versand
87
SICHERE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#5
▼ Mehr anzeigen
▲ Weniger anzeigen
Power Over Ethernet HAT (G) for Raspberry Pi 5, Supports IEEE 802.3af/at Network Standard, with standard Raspberry Pi 40PIN GPIO header, easy to assemble into Raspberry Pi 5 Official Case
IEEE 802.3af/at-compliant PoE HAT for Raspberry Pi 5, by using with a PoE router or switch that supports the IEEE 802.3af/at network standard, it is possible to provide both network connection and power supply for Raspberry Pi 5 in one cable
Power output--GPIO header: 5V 5A (MAX)
PoE power input: 38V ~ 57V DC in
Onboard original IC solution for more stable PoE power performance, adopts non-isolated switched-mode power supply (SMPS)
25,99 € AUF AMAZON
Geekworm
Geekworm X1203 5V UPS Shield for Raspberry Pi 5| Max 5.1V 5A Output|Wide 6-18V Input|Auto Power On|Safe Shutdown|Power Loss Detection
Kostenloser Versand
82
SICHERE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#6
▼ Mehr anzeigen
▲ Weniger anzeigen
【Compatibility】Raspberry Pi 5 UPS only compatible with Raspberry Pi 5 SBC (NOT include Raspberry Pi 5), Model: X1203
【Function】X1203 provides max 5.1V 5000mA Power Backup, intelligent and safe power management like auto power on, safe shutdown, full power-off from software, power loss and power adapter failure detection, on-board power button to power on/off
【XH2.54 2PIN Connector for BAT】With 2pcs XH2.54 2PIN Connector for 3.7V Lithium battery connection.
【How to Power】 ✓Power via DC 5521 power jack of X1203: 6-18Vdc , ≥3A (Refer to DC 12V 5A PSU ASIN: B0BD81W6SN); OR ✓Power via USB-C port of X1203: 5Vdc 5A via USB Type-C (Refer to 5V 5A USB-C power adapter ASIN: B0CZCZF2QV)
【Packing List】1x X1203 5V UPS Shield, 1x Screws Pack (Not include Raspberry Pi 5, batteries or power adapter)
51,00 € AUF AMAZON
Waveshare
Waveshare UPS HAT for Raspberry Pi, 5V Uninterruptible Power Supply, Multi Batt Protection Circuits, Power Your Pi Seamlessly from Power Connection OR The Backup Batt
Kostenloser Versand
80
GUTE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#7
▼ Mehr anzeigen
▲ Weniger anzeigen
Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards like Raspberry Pi 4B/3B+/3B/2B/B+/A+/Zero/Zero W/Zero WH
I2C bus communication, monitoring the batt voltage, current, power, and remaining capacity in real time
Multi batt protection circuits: over charge/discharge protection, over current protection, short circuit protection, and reverse protection, along with the equalizing charge feature, more safe and stable
Onboard 5 V regulator, up to 2.5 A continuous output current. 5 V USB output, convenient for powering other boards
batt warning indicators, easy to check if the batt is connected correctly. Comes with development resources and manual (English language not guaranteed)
33,99 € AUF AMAZON
ZDE
ZDE ZP580 PoE+ HAT for Raspberry Pi 5 Power Over Ethernet HAT Adapter Board Supports 802.3af/at Network Standard with Onboard Cooling Fan
Kostenloser Versand
77
GUTE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#8
▼ Mehr anzeigen
▲ Weniger anzeigen
The PoE+ HAT expansion board is an 802.3af/at-compliant Power Over Ethernet accessory for the Raspberry Pi 5. With Standard Pi 40PIN GPIO stackable header, allows connecting other HATs and peripherals.
Suitable for use with a PoE router or switch that supports the IEEE 802.3af/at networking standard. Providing both network connection and power supply for your Raspberry Pi in only one Ethernet cable.
Equipped with an onboard active cooling fan for better heatsink and more stable operation performance. If you don’t need to use the cooling fan, you can also disassemble it.
Comes with onboard 5V & 12V header outputs. 5V header provides up to 4.5A output (MAX 25W for 12V+5V total output power). Be able to power extra devices while providing stable power to Raspberry Pi.
Onboard buck chip: Incorporates original voltage buck chip, providing up to 5A under sufficient heat dissipation condition.
Suitable for use with aluminum case kit. For aluminum enclosure, please refer to model ZC501(ASIN: B0DSZYLMSS).
24,99 € AUF AMAZON
Waveshare
Waveshare PoE HAT (G), Compatible with Raspberry Pi 5, 5V 5A Output, Stable Performance, Supports 802.3af/at Network Standard, Power Over Ethernet HAT (G), Suitable for RPi 5 Official Case
Kostenloser Versand
71
GUTE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#9
▼ Mehr anzeigen
▲ Weniger anzeigen
✅Power Over Ethernet HAT For Raspberry Pi 5, Supports IEEE 802.3af/at Network Standard, 5V 5A Output, Compatible With Raspberry Pi 5 Official Case
✅Standard Raspberry Pi 40PIN GPIO header. PoE capability,IEEE 802.3af/at-compliant
✅By using with a PoE router or switch that supports the IEEE 802.3af/at network standard, it is possible to provide both network connection and power supply for your Raspberry Pi in only one Ethernet cable.
✅Onboard original IC solution for more stable PoE power performance
✅Adopts non-isolated switched-mode power supply (SMPS). Compact and easy to assemble
26,99 € AUF AMAZON
Waveshare
Power Over Ethernet (PoE) HAT für Raspberry Pi 5 / CM5, 802.3af/at PoE Netzwerk Standard, 5V 5A Ausgang, Isoliertes Schaltnetzteil, Kompatibel mit Offiziellen Pi5 Gehäuse und Aktiven Kühler
Kostenloser Versand
68
GUTE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#10
▼ Mehr anzeigen
▲ Weniger anzeigen
Power Over Ethernet (PoE) HAT for Raspberry Pi 5 / CM5, with standard Pi 40PIN GPIO header, compatible with Raspberry Pi 5 official case and active cooler. 5V 5A (MAX) GPIO header power output
PoE capability, IEEE 802.3af/at-compliant, by using with a PoE router or switch that supports the IEEE 802.3af/at network standard, it is possible to provide both network connection and power supply for your Raspberry Pi in only one Ethernet cable
Onboard original IC solution for more stable PoE power performance
Adopts isolated switched-mode power supply (SMPS)
Compact and easy to assemble. Dimensions: 56.5 × 65.0mm
32,63 € AUF AMAZON
raspberry pi 5 power
hat raspberry pi 5
raspberry pi 5 hat
raspberry pi 5 power switch
raspberry pi 5 power board
raspberry pi power hat
power bank raspberry pi 5
raspberry pi 5 power bank
raspberry pi 5 hat kabel
raspberry pi 5 power button