Raspberry Pi 5 Power Board
Die 10 besten Produkte von Oktober 2025
Letzte Aktualisierung:
9. Oktober 2025
Yahboom
Yahboom Raspberry Pi 5 Power Expansion Board Robot Voltage Stabilization,for Jetson Nano and Pi5 Mobile Robots Supports Raspberry Pi5 Power Supply Protocol,Stacked with Pi5
Kostenloser Versand
98
MAXIMALE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#1 GEWINNER
▼ Mehr anzeigen
▲ Weniger anzeigen
【Supports Pi5 power supply protocol】The robot regulated power supply expansion board supports the Pi5 power supply protocol, which can provide 5V/5A power supply to the Pi 5, effectively avoiding the low voltage and USB port current limit warnings of the Pi 5. Ensure sufficient current is provided to USB peripherals to avoid abnormal situations such as freezing and restarting, and unleash the full performance of Raspberry Pi 5.
【Powerful power supply compatibility】6~24V wide voltage input, 5V/5A stable output. Requires regulated 5V power supply equipment: such as RaspberryPi, Jetson Nano, Arduino, STM32 development board, RDK development board, etc. Additional self-purchased cables are required to connect Arduino and STM32.
【Power supply output mode】The robot regulated power supply expansion board has flexible input voltage adaptation and stable output characteristics. It can intelligently adjust the output current according to different input voltages to ensure that it provides 5V/3A output when the input is 6V, and 5V/3A when the input is 7V. Provides higher 5V/5A output when input to 24V to meet the power supply needs of different devices.
【Comes with dual Type-C power supply adapter boards】Pi5 uses dual Type-C power supply adapter boards to directly connect to the regulated power supply expansion board. The power supply adapter board supports the PD protocol to meet the power transmission needs of Pi 5. Effectively reduce cable redundancy. It also supports Pi5 stacking installation, which is not only suitable for Pi 5, but also compatible with the stacking use of Pi4B and other motherboards.
【Application Scenario】It can provide mobile power supply for various types of Raspberry Pi 5 robots. It has a safe and stable power supply system, with on-board input anti-reverse protection, output over-current protection, current-limiting protection, over-voltage protection, and over-temperature protection. Yahboom provides technical support, please contact us if you have any questions.
15,99 € AUF AMAZON
Waveshare
Waveshare Micro HDMI to Female HDMI Adapter Board Compatible with Raspberry Pi 5/4 B,Supports Dual 4K Outputs,Two Power Supply Methods
Kostenloser Versand
97
BESTE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#2
▼ Mehr anzeigen
▲ Weniger anzeigen
Micro HDMI To HDMI Adapter Board,Supports Raspberry Pi 5 & Raspberry Pi 4B
Dual 4K Outputs
Easy To Connect The HDMI Screens,Converts Micro HDMI Interfaces To HDMI Female Ports For Easier Connection
Two Power Supply Methods,Supports Power Supply Via Type-C Port Or Screw Terminal
12,49 € AUF AMAZON
GeeekPi
GeeekPi Raspberry Pi UPS V5 Power Supply Uninterruptible UPS HAT for Raspberry Pi 5,Support 18650 Battery Charger Power Bank Power Management Expansion Board 5V for Raspberry Pi 4B/3B+/3B/2B/B+/B/A+/A
13% Rabatt
Kostenloser Versand
95
TOP QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#3
▼ Mehr anzeigen
▲ Weniger anzeigen
UPS Plus ist eine neue Generation von USV-Energieverwaltungsmodulen, die OTA-Firmware-Upgrades unterstützen und RTC onboard unterstützen.
Es gibt zwei INA219-Chips an Bord, um die Batteriespannung und den Spannungsausgang von UPS Plus an Raspberry Pi zu erkennen.
Kompatibel mit Raspberry Pi 5 / 4B / 3B+ / 3B / 2B / B+ / B / A+ / A
Paket beinhaltet: 1 x UPS Plus für Raspberry Pi, 4 x M2,5 Kupfersäule, 4 x M2,5 Schrauben, 4 x M2,5 langer Kupferstab, 4 x M2,5 Muttern, 1 x Acrylschild, 1 x Anleitung, Bitte beachten Sie, dass die 18650 Batterien nicht im Lieferumfang enthalten sind.
Informationen zur Verwendung finden Sie unter wiki.52pi.com/index.php?title=EP-0136
39,99 € AUF AMAZON
Waveshare
POE HAT (F) for Raspberry Pi 5, 802.3af/at-Compliant, Power Over Ethernet HAT Expansion Board for Raspberry Pi 5, with Metal Heatsink,Onboard Cooling Fan
Kostenloser Versand
89
HOHE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#4
▼ Mehr anzeigen
▲ Weniger anzeigen
POE HAT with standard Raspberry Pi 40PIN GPIO header, compatible with Raspberry Pi 5
By using this small HAT and some proper 802.3af/at-compliant power sourcing equipments, it is possible to provide both network connection and power supply for your Raspberry Pi in only one Ethernet cable.
PoE (Power Over Ethernet) capability,IEEE 802.3af/at-compliant.x
Fully isolated switched-mode power supply (SMPS)
Onboard high speed active cooling fan, with metal heatsink, better heat dissipation
29,75 € AUF AMAZON
GeeekPi
GeeekPi P33 M.2 NVME M-Key PoE+ Hat für Raspberry Pi 5, mit offiziellem Raspberry Pi 5 Active Cooler, Unterstützung M.2 NVMe SSD 2230 2242 2260 2280
Kostenloser Versand
85
SICHERE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#5
▼ Mehr anzeigen
▲ Weniger anzeigen
Kompatibilität: Dieses Set enthält einen P33 M.2 NVME M-Key PoE+ HAT und einen offiziellen Raspberry Pi Active Cooler, der speziell für das neueste Raspberry Pi 5-Modell entwickelt wurde, um optimale Leistung und Kompatibilität zu gewährleisten. für P33 mit Aluminium Case Kit, ASIN: B0DMW98LBR
Unterstützung für Hochgeschwindigkeits-NVMe-SSDs: Die HAT-Platine unterstützt M.2-NVMe-SSDs für blitzschnellen Datenzugriff und -speicherung
M.2-Schnittstelle: Nutzen Sie die PCIe-Schnittstelle für Hochleistungskommunikation zwischen SSD und Raspberry Pi.
PoE HAT Design: Vereinfachen Sie die Stromversorgung mit Power over Ethernet, eliminieren Sie die Notwendigkeit für zusätzliche Stromkabel.
Stromeingang: Ethernet (PoE+) 802.3at-Protokoll, bis zu 25,5 W
39,99 € AUF AMAZON
xicoolee
Uninterruptible Power Supply HAT for Raspberry Pi Zero Series, 5V Stable Output, Solar Charging (5V–24V), Ba-ttery Monitoring via I2C, LED Indicators, Low-Power UPS Expansion Board
Kostenloser Versand
80
GUTE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#6
▼ Mehr anzeigen
▲ Weniger anzeigen
🔋 Designed for Raspberry Pi Zero Series: Fully compatible with Raspberry Pi Zero / Zero W / Zero 2 W, this UPS HAT provides plug-and-play support with compact size and high energy density.
⚡ Uninterruptible Power Supply with Path Management: Features smart charging and discharging via onboard path management chip—supports charging and powering devices at the same time without power loss.
☀️ Solar Power Support with MPPT Algorithm: Accepts solar panel input from 5V to 24V, with MPPT for optimal power tracking—ideal for outdoor or off-grid Raspberry Pi Zero projects.
📊 I2C Ba-ttery Monitoring & LED Display: Onboard ba-ttery monitoring chip communicates via I2C to report real-time voltage, current, and power data. LED indicators show battery level at a glance.
🛡️ High-Efficiency Power Circuit & Safety Protections: Integrated boost converter and ba-ttery protection ICs ensure stable 5V output and safe operation, even in demanding applications like edge computing or IoT.
27,90 € AUF AMAZON
Raspberry Pi
offizieller Raspberry Pi 5 USB-C Netzteil 27W, USB-C Power Supply, schwarz
15% Rabatt
Kostenloser Versand
78
GUTE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#7
▼ Mehr anzeigen
▲ Weniger anzeigen
Nennstrom: 2.25 amps
Stecker-Typ: USB Typ C
Typ Des Hauptstromanschlusses: 2 pin
Wattzahl: 27.0 watts
Art Der Stromquelle: Kabelgebunden
15,90 € AUF AMAZON
ZDE
ZDE ZP580 PoE+ HAT for Raspberry Pi 5 Power Over Ethernet HAT Adapter Board Supports 802.3af/at Network Standard with Onboard Cooling Fan
Kostenloser Versand
76
GUTE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#8
▼ Mehr anzeigen
▲ Weniger anzeigen
The PoE+ HAT expansion board is an 802.3af/at-compliant Power Over Ethernet accessory for the Raspberry Pi 5. With Standard Pi 40PIN GPIO stackable header, allows connecting other HATs and peripherals.
Suitable for use with a PoE router or switch that supports the IEEE 802.3af/at networking standard. Providing both network connection and power supply for your Raspberry Pi in only one Ethernet cable.
Equipped with an onboard active cooling fan for better heatsink and more stable operation performance. If you don’t need to use the cooling fan, you can also disassemble it.
Comes with onboard 5V & 12V header outputs. 5V header provides up to 4.5A output (MAX 25W for 12V+5V total output power). Be able to power extra devices while providing stable power to Raspberry Pi.
Onboard buck chip: Incorporates original voltage buck chip, providing up to 5A under sufficient heat dissipation condition.
Suitable for use with aluminum case kit. For aluminum enclosure, please refer to model ZC501(ASIN: B0DSZYLMSS).
24,99 € AUF AMAZON
Waveshare
Waveshare UPS HAT for Raspberry Pi, 5V Uninterruptible Power Supply, Multi Batt Protection Circuits, Power Your Pi Seamlessly from Power Connection OR The Backup Batt
Kostenloser Versand
72
GUTE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#9
▼ Mehr anzeigen
▲ Weniger anzeigen
Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards like Raspberry Pi 4B/3B+/3B/2B/B+/A+/Zero/Zero W/Zero WH
I2C bus communication, monitoring the batt voltage, current, power, and remaining capacity in real time
Multi batt protection circuits: over charge/discharge protection, over current protection, short circuit protection, and reverse protection, along with the equalizing charge feature, more safe and stable
Onboard 5 V regulator, up to 2.5 A continuous output current. 5 V USB output, convenient for powering other boards
batt warning indicators, easy to check if the batt is connected correctly. Comes with development resources and manual (English language not guaranteed)
33,99 € AUF AMAZON
ZDE
ZDE T-Type GPIO Breakout Erweiterungskarte GPIO Adapterboard + 40 Pin Flachbandkabel + Breadboard Kompatibel mit Raspberry Pi 5 4B 3B+ 3B 2B B+
Kostenloser Versand
66
GUTE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#10
▼ Mehr anzeigen
▲ Weniger anzeigen
Mit der GPIO-Erweiterungsplatine können Sie alle Himbeerversionen der Platine an verschiedene Sensoren und elektronische Komponenten anschließen.
GPIO-Erweiterungskarten-Breakout-Board-Kit, geeignet für Projekte mit Raspberry Pi 5 4B 3B+ 3B 2B B+ A+ A, Zero W und Raspberry Pi Zero.
Das 40-polige IDC-Flachband-GPIO-Kabel ist aus hochwertigem Kupfer-Weichdrahtmaterial hergestellt, das sicher und langlebig ist.
Das Breadboard ist aus hochwertigem ABS-Kunststoff gefertigt, jede Reihe und Spalte hat entsprechende Buchstaben und Zahlen, die die Fehlerhandhabung reduzieren, mit selbstklebendem Band auf der Rückseite und mehreren Gliedern zum Schnallen.
Es hilft Ihnen, all diese leckeren Power-, GPIO-, I2C- und SPI-Pins aus dem 40-poligen Header des Raspberry Pi herauszuholen.
10,99 € AUF AMAZON
raspberry pi 5 power
raspberry pi 5 power button
raspberry pi 5 power hat
raspberry pi 5 power switch
raspberry pi 5 breakout board
power bank raspberry pi 5
raspberry pi 5 power bank
power supply raspberry pi 5
raspberry pi 5 power supply
raspberry pi 5 power adapter