Raspberry Pi 5 Hat
Die 10 besten Produkte von Juni 2025
Letzte Aktualisierung:
8. Juni 2025
Geekworm
Geekworm X1001 PCIe to M.2 NVMe Key-M SSD Shield for Raspberry Pi 5
Kostenloser Versand
99
MAXIMALE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#1 GEWINNER
▼ Mehr anzeigen
▲ Weniger anzeigen
【Compatibility】Only for Raspberry Pi 5 8GB / 4GB (NOT included)
【Matching Case (NOT included)】P579 (ASIN: B0CRB3DT5M); Or P579 Case with Official Active Cooler (ASIN: B0CT4P893Q)
【M2 Key-M NVMe SSD Supported】Support M.2 KEY-M NVMe SSD 2230/2242/2260/2280 length installation.【IMPORTANT】DON'T use NVMe SSD with Phison controller, please refer to: https://wiki.geekworm.com/X1001#Important_Notes
【How to Power】Use 5Vdc +/-5%, 5A to power via Raspberry Pi 5, and Pi 5 will power X1001 via FFC PCIe ribbon. Recommend to use Geekworm PD 27W power adapter (ASIN: B0CP8SRXSC)
【Packing List】1 x X1001 Shield, 1x Accessories Pack
12,95 € AUF AMAZON
FREENOVE
Freenove Breakout Board for Raspberry Pi 5 / 4B / 3B+ / 3B / 3A+ / 2B / 1B+ / 1A+ / Zero 2 W/Zero W/Zero, Terminal Block Shield HAT with Pin Header, GPIO Status LED
Kostenloser Versand
96
BESTE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#2
▼ Mehr anzeigen
▲ Weniger anzeigen
Compatible Models: Raspberry Pi 5 / 4B / 3B+ / 3B / 3A+ / 2B / 1B+ / 1A+ / Zero 2 W / Zero W / Zero (Note: NOT compatible with 500 / 400)
GPIO Status LED: LED on if GPIO outputs / inputs high level, LED off if GPIO outputs / inputs low level
Independent LED: The status LED is driven by the chip instead of the GPIO so the GPIO will not be affected
Terminal Block and Header: Connect to all pins of Raspberry Pi's 40-pin GPIO header, 2.54 mm (0.1 inch) pitch
Pin Name: The BCM numbering name of each pin is printed next to it
11,95 € AUF AMAZON
Raspberry Pi
PCIe M.2 HAT für Raspberry Pi 5, M-Key
Kostenloser Versand
95
TOP QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#3
▼ Mehr anzeigen
▲ Weniger anzeigen
Unterstützt einspurige PCIe 2.0-Schnittstelle (500 MB/s Spitzenübertragungsrate)
Unterstützt Geräte, die den M.2-M-Key-Edge-Anschluss verwenden. Unterstützt Geräte mit dem Formfaktor 2230 oder 2242
Kann angeschlossene M.2-Geräte mit bis zu 3 A versorgen. Inklusive Power- und Aktivitäts-LEDs
Entspricht der Raspberry Pi HAT+ Spezifikation
Lieferung mit Flachbandkabel, 16 mm Stapelkopf, Gewindeabstandshalter und Schrauben und gerändelter Doppelflanschschraube zur Sicherung und Unterstützung des M.2-Peripheriegeräts
15,11 € AUF AMAZON
GeeekPi
GeeekPi P33 M.2 NVME M-Key PoE+ Hat für Raspberry Pi 5, mit offiziellem Raspberry Pi 5 Active Cooler, Unterstützung M.2 NVMe SSD 2230 2242 2260 2280
Kostenloser Versand
92
TOP QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#4
▼ Mehr anzeigen
▲ Weniger anzeigen
【Kompatibilität】Dieses Set enthält einen P33 M.2 NVME M-Key PoE+ HAT und einen offiziellen Raspberry Pi Active Cooler, der speziell für das neueste Raspberry Pi 5-Modell entwickelt wurde, um optimale Leistung und Kompatibilität zu gewährleisten. für P33 mit Aluminium Case Kit, ASIN: B0DMW98LBR
【High-Speed NVMe SSD Support】The HAT board supports M.2 NVMe SSDs for lightning-fast data access and storage.
【M.2-Schnittstelle】 Nutzen Sie die PCIe-Schnittstelle für Hochleistungskommunikation zwischen SSD und Raspberry Pi.
【PoE HAT Design】Vereinfachen Sie die Stromversorgung mit Power over Ethernet, eliminieren Sie die Notwendigkeit für zusätzliche Stromkabel.
【802.3at PoE Support】 Erfordert einen PoE-Switch mit 802.3at PoE-Switch, um bis zu 30 W Leistung zu liefern, und die Leistung reicht für die Anforderung von Anwendungen.
Maximale Leistung: Kann bis zu 25 W bei 5,1 V/4,5 A geliefert werden, geeignet für die Stromversorgung über Raspberry Pi und NVMe SSD.
39,99 € AUF AMAZON
Geekworm
Geekworm X1004 Dual M.2 NVMe SSD Shield PCIe Peripheral Board for Raspberry Pi 5
Kostenloser Versand
82
SICHERE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#5
▼ Mehr anzeigen
▲ Weniger anzeigen
【Compatibility】only for Raspberry Pi 5 8GB / 4GB / 2GB / 1GB (NOT included)
【Support Dual M2 SSD】Compatible with M.2 KEY-M NVMe SSD 2280 (NOT included)
【How to Power】5Vdc +/-5%, 5A via Raspberry Pi 5. Recommend to use Geekworm PD 27W power adapter (ASIN: B0CP8SRXSC); or GaN PD 27W power supply (ASIN: B0CZCZF2QV)
【Support NVMe Boot】X1004 now supports NVMe boot with the latest eeprom (2024/05/17 version)
【Packing List】1 x X1004 PCIe to M2 NVMe Shield, 1x Accessories Pack
【Matching Case (NOT included)】Refer to P579-V2 Case (ASIN: B0CRB3DT5M), or P579-V2 Case with active cooler (ASIN: B0CT4P893Q)
【Note】Since X1004 is using ASMedia ASM1182e PCIe switch, it can't support PCIe Gen 3 speed, so even though we forced to turn on PCIe Gen 3.0 setting in Raspberry Pi 5, it is limited by ASMedia ASM1182e PCIe switch. speed is still PCIe Gen 2.0 speed.
38,00 € AUF AMAZON
GeeekPi
GeeekPi N04 M.2 M-Key NVMe SSD Shield für Raspberry Pi 5, M.2 2280 PCIe to NVMe SSD Shield Pip PCIe Peripheral Board Top für Raspberry Pi 5 4GB/8GB (SSD and Pi5 Board Are not Included) Barebones
35% Rabatt
Kostenloser Versand
80
GUTE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#6
▼ Mehr anzeigen
▲ Weniger anzeigen
N04 M.2 NVMe to PCIe Adapter is designed for the latest Raspberry Pi 5. It supports the installation of NVMe (M-key) drives in M.2 format sizes 2230, 2242, 2260 and 2280. Extra custom CNC SSD mount screw, no soldering required.
PCIe x1 interface in both Gen2 & Gen3 standards. The short trace routing of PCIe is more reliable and faster, fully meeting the signal requirements of PCIe 3.0.
Ventilation hole design provides excellent ventilation airflow for cooling; Integrated voltage regulator delivering up to 3A for the 3.3V power rail, compliant with M.2 (NGFF) standard.
Comes with a FPC PCIe ribbon, M2 and M2.5 screws, spacers, and extra custom CNC SSD mount screw.
【Matching Case (NOT included)】Metal Case for N04 & Raspberry Pi 5, refer to ASIN: B0CMZG29LG; Aluminum Case for N04 & Raspberry Pi 5,refer to ASIN: B0CMZCG8P7
12,95 € AUF AMAZON
Geekworm
Geekworm X1005 Dual NVMe SSD Shield Bottom for Raspberry Pi 5, Supports Hailo-8 AI Accelerator
Kostenloser Versand
78
GUTE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#7
▼ Mehr anzeigen
▲ Weniger anzeigen
【Compatibility】Raspberry Pi 5 Dual NVMe Hat only compatible with Raspberry Pi 5, Model: X1005
【Support Dual M2 NVMe SSD with multiple length】Support M.2 KEY-M NVMe SSD 2230/2242/2260/2280 length installation. Comes with SSD copper pillar for 2230/2242/2260 SSD installation
【 Raspberry Pi 5 AI Hat Extension】 Supports Hailo AI acceleration module built around the Hailo-8L chip from Raspberry Pi AI Kit
【 Support NVMe Boot】 Supports NVMe boot with eeprom 2024/05/17 and later version
【How to Power】 5Vdc +/-5% power via GPIO pin header and FFC, converted to 3.3V max 3A to power the SSD; Recommend to use Geekworm PD 27W power adapter (ASIN:B0CP8SRXSC) or (ASIN:B0CZCZF2QV)
【Packing List】1 x X1015 PCIe Peripheral Board, 2x 40mm PCIe FFC Cable(One as backup), 1x GPIO Header, 1x Screws Pack (Note: not include Raspberry Pi 5, SSD, TF card or power adapter.)
【Matching Case (NOT include)】Refer to P580-V2 Case (ASIN: B0D99HVX3C). NOT compatible with P580!
38,00 € AUF AMAZON
GeeekPi
GeeekPi Raspberry Pi 5 Gehäuse mit Official Active Cooler, Support PCIe M.2 NVMe SSD Shield Top X1001 / X1000 / N04 / N05
Kostenloser Versand
76
GUTE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#8
▼ Mehr anzeigen
▲ Weniger anzeigen
【Compatibility】① Support Raspberry Pi 5 with PCIe M.2 NVMe Shield TOP like N04 (ASIN: B0CTLX5MW5), N05 (ASIN: B0CTLT39Y3) ②Support separate Raspberry Pi 5 8GB / 4GB Motherboard ③ Support Official Raspberry Pi 5 Active Cooler, for N04 Kit, ASIN: B0CXPBQK7F, for Pi5 8GB with N04 Starter Kit,ASIN: B0D1QQ174C
【Official Raspberry Pi 5 Active Cooler Included】The Raspberry Pi Active Cooler for Raspberry Pi 5 is a dedicated clip-on cooling solution for Raspberry Pi 5. It combines an aluminium heatsink with a temperature-controlled blower fan to keep your Raspberry Pi 5 at a comfortable operating temperature, even under heavy loads.
【Robust and Portable】This Raspberry Pi 5 Metal Case is made of High-Quality iron material, can provide a strong and durable protection for your Raspberry Pi 5 Board.
【Easy Access to all Ports】GeeekPi Raspberry Pi 5 Case can accurately access usb-c power jack, micro HDMI ports, usb ports, Ethernet jack, sd card slot, power button, 4-lane MIPI DSI/CSI connectors and so on.
【Package Includes】1x Metal Case for Raspberry Pi 5, 1x Official Raspberry Pi 5 Active Cooler; 1x Screws Pack,1x 4pcs Rubber Pads; 1x Screwdriver. Please noted: The Raspberry Pi Board is not included in the package.
【Please Noted】NOT include Raspberry Pi 5 Board, M.2 NVMe SSD Shield, M.2 NVMe SSD, or Power Adapter.
23,99 € AUF AMAZON
Waveshare
Waveshare PoE HAT (G), Compatible with Raspberry Pi 5, 5V 5A Output, Stable Performance, Supports 802.3af/at Network Standard, Power Over Ethernet HAT (G), Suitable for RPi 5 Official Case
Kostenloser Versand
74
GUTE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#9
▼ Mehr anzeigen
▲ Weniger anzeigen
✅Power Over Ethernet HAT For Raspberry Pi 5, Supports IEEE 802.3af/at Network Standard, 5V 5A Output, Compatible With Raspberry Pi 5 Official Case
✅Standard Raspberry Pi 40PIN GPIO header. PoE capability，IEEE 802.3af/at-compliant
✅By using with a PoE router or switch that supports the IEEE 802.3af/at network standard, it is possible to provide both network connection and power supply for your Raspberry Pi in only one Ethernet cable.
✅Onboard original IC solution for more stable PoE power performance
✅Adopts non-isolated switched-mode power supply (SMPS). Compact and easy to assemble
26,99 € AUF AMAZON
Waveshare
Waveshare NVMe PCIe to M.2 HAT+ Adapter with PoE, Compatible with Raspberry Pi 5, Supports NVMe Drive Protocol 2230/2242 M.2 Solid State Drive and 802.3af/at Network Standard, with Cooling Fan
Kostenloser Versand
68
GUTE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#10
▼ Mehr anzeigen
▲ Weniger anzeigen
PCIe To M.2 with PoE HAT,designed for Raspberry Pi 5, supports IEEE 802.3af/at network standard. Adapter for NVMe Protocol M.2 Solid State Drive, High-speed Reading/Writing.
Improves reading/writing speed of your Pi. Note: Only supports the NVMe Protocol Solid State Drives.
Based on 16PIN PCIe Interface of Raspberry Pi 5. Standard Raspberry Pi 40PIN GPIO stackable header, allows connecting other HATs
Onboard Dual LED Indicators,easy to monitor the Working Status. Compatible With 2230/2242 Size M.2 Solid State Drive. Supports Gen2 and Gen3 Modes, Supports Booting PI5 From Solid State Drive.
Providing both network connection and power supply for your Raspberry Pi in one cable
5V header provides up to 4.5A output (MAX 25W for 12V+5V total output power). be able to power extra devices while providing stable power to Raspberry Pi.
️Rich WiKi Resources️ We provide official Wiki resources, please contact us for more information.
35,99 € AUF AMAZON
hat raspberry pi 5
raspberry pi 5 case hat
raspberry pi 5 hat case
raspberry pi 5 wifi hat
poe hat raspberry pi 5
raspberry pi 5 poe hat
raspberry pi 5 poe+ hat
raspberry pi 5 hat ssd
raspberry pi 5 pcie hat
raspberry pi 5 ssd hat
#1 GEWINNER
