Raspberry Io
Die 10 besten Produkte von Juni 2025
Letzte Aktualisierung:
8. Juni 2025
FREENOVE
Freenove Breakout Board for Raspberry Pi 5 / 4B / 3B+ / 3B / 3A+ / 2B / 1B+ / 1A+ / Zero 2 W/Zero W/Zero, Terminal Block Shield HAT with Pin Header, GPIO Status LED
Kostenloser Versand
98
MAXIMALE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#1 GEWINNER
▼ Mehr anzeigen
▲ Weniger anzeigen
Compatible Models: Raspberry Pi 5 / 4B / 3B+ / 3B / 3A+ / 2B / 1B+ / 1A+ / Zero 2 W / Zero W / Zero (Note: NOT compatible with 500 / 400)
GPIO Status LED: LED on if GPIO outputs / inputs high level, LED off if GPIO outputs / inputs low level
Independent LED: The status LED is driven by the chip instead of the GPIO so the GPIO will not be affected
Terminal Block and Header: Connect to all pins of Raspberry Pi's 40-pin GPIO header, 2.54 mm (0.1 inch) pitch
Pin Name: The BCM numbering name of each pin is printed next to it
11,95 € AUF AMAZON
SEENGREAT
SEENGREAT MCP23017 IO Expansion Board I2C Interface for Raspberry Pi for Aruino STM32 3.3V/5V Levels Expands 16 I/O Pins Mini Size Version
Kostenloser Versand
97
BESTE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#2
▼ Mehr anzeigen
▲ Weniger anzeigen
MCP23017(SG-IO-E017A) IO port expander module adopts I2C interface, less pin occupation. Mini size: 34.5mm(Length)*25mm(width)
MCP23017(SG-IO-E017A) breakout board onboard 3-digit DIP switch is convenient for users to set I2C address
Compatible with 3.3V/5V working level
PH2.0 interface and 2.54mm spacing pad reserved for easy access to other development boards
We provide open source demo codes for Raspberry Pi, Ardui. and STM32 development boards
12,80 € AUF AMAZON
GeeekPi
GeeekPi Raspberry Pi GPIO Screw Terminal Block Breakout Board HAT with GPIO Status LED, Raspberry Pi GPIO Expansion Board Breakout Module for Raspberry Pi 4B/3B+/3B/2B/B+/Pi Zero W/Pi Zero 2 W
Kostenloser Versand
95
TOP QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#3
▼ Mehr anzeigen
▲ Weniger anzeigen
This is a very beautiful screw terminal expansion version, which is expanded for the pins of the Raspberry Pi. Compatible with Raspberry Pi 4B/3B+/3B/2B/B+/Pi Zero/Pi Zero W/Pi Zero 2 W.
It is convenient for everyone to connect when doing electronic experiments. Terminal Block Pitch is 3.5mm. Wire Gauge Range is 16 to 26AWG.Stripping Length is 5mm.There is the pin out information of the GPIO pin on the top of the terminal and on the side.
The status information of the pin is displayed. When the GPIO pin is operated and effective in the terminal, the LED matrix on the right side of the terminal will display the status of the GPIO pin, and some distinctions are made in the color selection of the LED lights.
The 5V power light is red, while the 3.3V power light is pink, the light of the special function pin is dark blue, and the indicator light of the ordinary GPIO pin is light blue, which is convenient and convenient for connection Observing the state is a good helper for electronic experiments.The positions of the LEDs correspond to the positions of the 2x20pin connectors of the Raspberry Pi.
Package Includes: 1x Screw Terminal Block Breakout Board, 1x Screw Kit, 1x Screw Driver, 1x Assembly Instruction
Anwendungsvideo:https://www.youtube.com/watch?v=G0xsN9pTVZc
19,99 € AUF AMAZON
SEENGREAT
SEENGREAT MCP23017 IO Expander Module I2C Interface Expands 16 I/O Pins for Ardui/Stm32 /Raspberry Pi Zero Zero W Zero WH 2B 3B 3B+ 4B,3.3V and 5V Levels,3-Digit DIP Switch
88
HOHE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#4
▼ Mehr anzeigen
▲ Weniger anzeigen
MCP23017(SG-IO-E017) IO port expander module adopts I2C interface, less pin occupation
MCP23017 breakout board onboard 3-digit DIP switch is convenient for users to set I2C address
Compatible with 3.3V/5V working level
PH2.0 interface and 2.54mm spacing pad reserved for easy access to other development boards
We provide open source demo codes for Raspberry Pi, Ardui. and STM32 development boards
12,80 € AUF AMAZON
Geekworm
Geekworm G469 GPIO Terminal Block Breakout Board for Raspberry Pi 4B/3B+/3B/ Zero 2W
Kostenloser Versand
84
SICHERE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#5
▼ Mehr anzeigen
▲ Weniger anzeigen
Mini GPIO Screw Terminal Block Breakout Board: This G469 is designed for easy and convenient access to the GPIO pins of your Raspberry Pi
Wide Compatibility: Suitable for Raspberry Pi 4B/3B+/3B/2B/ZERO and other models
Simple and Clear Identification: Come with pin definition sticker and silk screen clearly labels the function of each pin, easy to wire
Industrial Terminal Design: High quality industrial terminals ensure stable and reliable connection, suitable for various application
Packing List: 1 x GPIO Terminal Block Breakout Board (Model: G469)
11,80 € AUF AMAZON
Waveshare
Waveshare Compute Module 5 IO Board, Compatible with All Variants of Raspberry Pi CM5, with PoE Feature, Bundle with PoE Base Board + Case + Power Supply Adapter
Kostenloser Versand
81
GUTE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#6
▼ Mehr anzeigen
▲ Weniger anzeigen
Standard CM5 socket and Raspberry Pi 40PIN GPIO header suitable for all variants of Compute Module 5
Providing both network connection and power supply for your Raspberry Pi in one cable
Faster reading/writing speed compared to the TF card slot of Raspberry Pi, greatly improving reading/writing efficiency of the system or files, support booting Raspberry Pi from NVMe Solid State Drive
ONboard Connectors Including MIPI / M.2 / HDMI / USB / ETH / TF Card Slot.each cut-out is completely aligned with the connector
Rich WiKi Resources: We provide official Wiki resources, please contact us for more information.
69,99 € AUF AMAZON
KEYESTUDIO
KEYESTUDIO Raspberry Pi PICO IO Shield for Raspberry Pi Pico Development Board
Kostenloser Versand
78
GUTE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#7
▼ Mehr anzeigen
▲ Weniger anzeigen
This Raspberry Pico IO shield is designed for the Raspberry Pi Pico development board. Note Raspberry Pico is Not Included!
It also incorporates communications ports like 2 x I2C, 2 x UART, 2 x SPI, 3 x analog IO and 13 x digital IO as well as a 6.5-12V power interface.
On board with four block building holes can assist to wire up multiple sensors or modules, which exceedingly increases more functions.
There are 26 GPIO pins, so you will be motivated to create what you want to make.
DC input voltage: 6.5-12V ; Output voltage: DC3.3V V
13,99 € AUF AMAZON
Waveshare
Waveshare Compute Module 5 IO Board, Compatible with All Variants of Raspberry Pi CM5, with PoE Feature, Single Board Only
Kostenloser Versand
77
GUTE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#8
▼ Mehr anzeigen
▲ Weniger anzeigen
Standard CM5 socket and Raspberry Pi 40PIN GPIO header, suitable for all variants of Compute Module 5
Providing both network connection and power supply for your Raspberry Pi in one cable
Faster reading/writing speed compared to the TF card slot of Raspberry Pi, greatly improving reading/writing efficiency of the system or files, support booting Raspberry Pi from NVMe Solid State Drive
Onboard Connectors Including MIPI / M.2 / HDMI / USB / ETH / TF Card Slot.each cut-out is completely aligned with the connector
Rich WiKi Resources: We provide official Wiki resources, please contact us for more information.
46,99 € AUF AMAZON
Raspberry Pi
Raspberry Pi Debug Probe
Kostenloser Versand
74
GUTE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#9
▼ Mehr anzeigen
▲ Weniger anzeigen
Formfaktor: 22 mm32 mm
Serielle USB-zu-Zweidraht-Bridge (Arm Serial Wire Debug wird standardmäßig unterstützt) | USB-zu-UART-Brücke
Kompatibel mit dem CMSIS-DAP-Standard
Funktioniert mit OpenOCD und anderen Tools, die CMSIS-DAP unterstützen
Enthält ein USB-Kabel und drei Debug-Kabel: 3-poliger JST-Stecker auf 3-poliges JST-Anschlusskabel; 3-poliger JST-Stecker auf 0,3 cm Header (weiblich); 3-poliger JST-Stecker auf 0,3 cm Header (männlich)
17,41 € AUF AMAZON
Waveshare
Waveshare CM5 IO Board Metal Case, Compatible with Raspberry Pi Official Compute Module 5 IO Board, Comes with Cooling Fan
Kostenloser Versand
67
GUTE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#10
▼ Mehr anzeigen
▲ Weniger anzeigen
Designed for Raspberry Pi official Compute Module 5 IO Board; Mini computer chassis, robust and nice looking
Make it easy to build your own Raspberry Pi CM5 mini PC
the standard 40PIN GPIO header is still available, making it easy to connect sorts of HATs
Each cut-out is completely aligned with the connector; Comes with cooling fan, combined with the airflow vent, better heat dissipation
Wall mount holes on two sides, handy for mounting. Binocular Vision, PoE Powered Raspberry Pi Projects, Or Other Industrial Context
26,99 € AUF AMAZON
raspberry pi io
raspberry io board
raspberry cm5 io
raspberry pi io hat
raspberry pi io broker
io
io io
raspberry pi 24v io
raspberry pi 4 io
raspberry pi io board
#1 GEWINNER
