main logo

Raspberry Pi Io Board

Die 10 besten Produkte von Oktober 2025
Letzte Aktualisierung: 9. Oktober 2025
FREENOVE
FREENOVE
Freenove Breakout Board for Raspberry Pi 5 / 4B / 3B+ / 3B / 3A+ / 2B / 1B+ / 1A+ / Zero 2 W/Zero W/Zero, Terminal Block Shield HAT with Pin Header, GPIO Status LED
Kostenloser Versand
star

98

MAXIMALE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#1 GEWINNER

  • Compatible Models: Raspberry Pi 5 / 4B / 3B+ / 3B / 3A+ / 2B / 1B+ / 1A+ / Zero 2 W / Zero W / Zero (Note: NOT compatible with 500 / 400)
  • GPIO Status LED: LED on if GPIO outputs / inputs high level, LED off if GPIO outputs / inputs low level
  • Independent LED: The status LED is driven by the chip instead of the GPIO so the GPIO will not be affected
  • Terminal Block and Header: Connect to all pins of Raspberry Pi's 40-pin GPIO header, 2.54 mm (0.1 inch) pitch
  • Pin Name: The BCM numbering name of each pin is printed next to it
  • 11,95 € AUF AMAZON
ZDE
ZDE
ZDE T-Type GPIO Breakout Erweiterungskarte GPIO Adapterboard + 40 Pin Flachbandkabel + Breadboard Kompatibel mit Raspberry Pi 5 4B 3B+ 3B 2B B+
Kostenloser Versand
star

97

BESTE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#2

  • Mit der GPIO-Erweiterungsplatine können Sie alle Himbeerversionen der Platine an verschiedene Sensoren und elektronische Komponenten anschließen.
  • GPIO-Erweiterungskarten-Breakout-Board-Kit, geeignet für Projekte mit Raspberry Pi 5 4B 3B+ 3B 2B B+ A+ A, Zero W und Raspberry Pi Zero.
  • Das 40-polige IDC-Flachband-GPIO-Kabel ist aus hochwertigem Kupfer-Weichdrahtmaterial hergestellt, das sicher und langlebig ist.
  • Das Breadboard ist aus hochwertigem ABS-Kunststoff gefertigt, jede Reihe und Spalte hat entsprechende Buchstaben und Zahlen, die die Fehlerhandhabung reduzieren, mit selbstklebendem Band auf der Rückseite und mehreren Gliedern zum Schnallen.
  • Es hilft Ihnen, all diese leckeren Power-, GPIO-, I2C- und SPI-Pins aus dem 40-poligen Header des Raspberry Pi herauszuholen.
  • 10,99 € AUF AMAZON
GeeekPi
GeeekPi
GeeekPi Raspberry Pi GPIO Screw Terminal Block Breakout Board HAT with GPIO Status LED, Raspberry Pi GPIO Expansion Board Breakout Module for Raspberry Pi 4B/3B+/3B/2B/B+/Pi Zero W/Pi Zero 2 W
Kostenloser Versand
star

95

TOP QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#3

  • This is a very beautiful screw terminal expansion version, which is expanded for the pins of the Raspberry Pi. Compatible with Raspberry Pi 4B/3B+/3B/2B/B+/Pi Zero/Pi Zero W/Pi Zero 2 W.
  • It is convenient for everyone to connect when doing electronic experiments. Terminal Block Pitch is 3.5mm. Wire Gauge Range is 16 to 26AWG.Stripping Length is 5mm.There is the pin out information of the GPIO pin on the top of the terminal and on the side.
  • The status information of the pin is displayed. When the GPIO pin is operated and effective in the terminal, the LED matrix on the right side of the terminal will display the status of the GPIO pin, and some distinctions are made in the color selection of the LED lights.
  • The 5V power light is red, while the 3.3V power light is pink, the light of the special function pin is dark blue, and the indicator light of the ordinary GPIO pin is light blue, which is convenient and convenient for connection Observing the state is a good helper for electronic experiments.The positions of the LEDs correspond to the positions of the 2x20pin connectors of the Raspberry Pi.
  • Package Includes: 1x Screw Terminal Block Breakout Board, 1x Screw Kit, 1x Screw Driver, 1x Assembly Instruction
  • Anwendungsvideo:https://www.youtube.com/watch?v=G0xsN9pTVZc
  • 19,99 € AUF AMAZON
ARCELI
ARCELI
ARCELI RPi GPIO Breakout-Erweiterungskarte + Flachbandkabel + T-Typ GPIO-Adapter 20 cm FC40 40-Pin-Flachbandkabel für Raspberry Pi 3 2 Modell B & B + SC05
Kostenloser Versand
star

90

HOHE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#4

  • Zusammengebautes RPi GPIO mit 8 "40-Pin-Flachbandkabel für Himbeer-Pi 3B, Himbeer-Pi 2 Modell B, Himbeer-Pi 1B +, Himbeer-Pi 1A +, Himbeer-Pi null W, Himbeer-Pi null
  • 1 * GPIO 40P 40-Pin Rainbow Ribbon-Kabel
  • 1 * GPIO-Erweiterungskarte
  • 40 Pins sind für einfaches Prototyping beschriftet
  • GPIO Adapter Plus für Raspberry Pi B +, Raspberry Pi 2, Raspberry Pi ist NICHT enthalten
  • 5,59 € AUF AMAZON
Waveshare
Waveshare
Mini Basisplatine für Raspberry Pi Compute Module 4 Lite/EMMC Series Module, mit Standard CM4 Sockel und Farbcodiertem Raspberry Pi 40PIN GPIO-Header, Onboard Mehrere Anschlüsse
Kostenloser Versand
star

85

SICHERE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#5

  • Mini base board designed for Raspberry Pi Compute Module 4, suitable for evaluating the raspberry pi CM4 or being integrated into end products
  • Compared with version B, there're NO RTC, Fan controller, and battery holder on version A, which is more cost effective
  • Standard Raspberry Pi CM4 socket and color-coded Raspberry Pi 40PIN GPIO header, suitable for Compute Module 4 Lite/EMMC series module
  • Onboard multiple connectors including: CSI/DSI/FAN/HDMI/USB/RJ45 Gigabit Ethernet/Micro SD Card Slot/M.2 Slot
  • Comes with mounting screw, easy to install. When using the M.2 interface, please use the matching screws.
  • 24,99 € AUF AMAZON
APKLVSR
APKLVSR
APKLVSR Screw Terminal Block Breakout Board HAT für Raspberry Pi GPIO,Schraubklemmenblock Breakout Board HAT Module mit GPIO Status LED für Raspberry Pi 4B/3B+/3B/Pi Zero
Kostenloser Versand
star

82

SICHERE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#6

  • Einfache Montage: Der Klemmenblockabstand beträgt 3,5 mm. Der Drahtstärkenbereich liegt zwischen 16 und 26 AWG. Die Abisolierlänge beträgt 5 mm. Die Pinbelegungsinformationen des GPIO-Pins befinden sich oben am Terminal und an der Seite.
  • Beobachten Sie den GPIO-Status: Wenn der GPIO-Pin im Terminal betätigt und wirksam ist, zeigt die LED-Matrix auf der rechten Seite des Terminals den Status des GPIO-Pins an, und es werden einige Unterschiede bei der Farbauswahl der LED-Leuchten gemacht.
  • LED-Anzeigen in verschiedenen Farben: Die 5-V-Stromanzeige ist rot, während die 3,3-V-Stromanzeige rosa ist, das Licht des Sonderfunktions-Pins dunkelblau ist und die Anzeigelampe des normalen GPIO-Pins hellblau ist. Die Positionen der LEDs entsprechen den Positionen der 2x20Pin Anschlüsse des Raspberry Pi.
  • Feine Pinbelegung des Terminals: Die Pinbelegungsinformationen des GPIO-Pins befinden sich oben am Terminal und an der Seite.
  • Lieferumfang: 1 x GPIO-Schraubklemmenhut, 4 x M2,5-Kupfersäule, 4 x M2,5-Schrauben, 4 x M2,5-Muttern, 1 x Schraubendreher Anwendungsvideo:https://www.youtube.com/watch?v=G0xsN9pTVZc
  • 15,99 € AUF AMAZON
GeeekPi
GeeekPi
GeeekPi Raspberry Pi Micro GPIO Terminal Block Breakout Board Module with LED,Raspberry Pi GPIO Expansion Board Micro Connector for Raspberry Pi 4B/3B+/3B/2B/Pi Zero/Pi Zero W/Pi Zero 2 W
11% Rabatt Kostenloser Versand
star

80

GUTE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#7

  • Compatible with all Raspberry Pi series: for Raspberry Pi 1 Model B+, Pi 2 Model B, Pi 3 Model B, Pi 3 Model B+, Pi 4 Model B, Pi Zero, Pi Zero W, Pi Zero 2 W
  • All 40pins of Raspberry Pi are transferred out by screw terminals, which is convenient for cable access. Does not occupy other space, very convenient when doing DIY circuits.
  • Easy to assemble,GPIO LED indicator,Stable connection for wiring circuit
  • 2x20 positions header connect to Raspberry Pi board,Terminal block pitch is 2.54mm/0.1".
  • GPIO function mark sticky for easy identification. wire size range 28AWG to 18AWG, strip length 4.5mm, screw M1.6 steel, pin header and cage copper.
  • 16,99 € AUF AMAZON
Waveshare
Waveshare
Waveshare Compute Module 5 IO Board, Compatible with All Variants of Raspberry Pi CM5, with PoE Feature, Single Board Only
Kostenloser Versand
star

75

GUTE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#8

  • Standard CM5 socket and Raspberry Pi 40PIN GPIO header, suitable for all variants of Compute Module 5
  • Providing both network connection and power supply for your Raspberry Pi in one cable
  • Faster reading/writing speed compared to the TF card slot of Raspberry Pi, greatly improving reading/writing efficiency of the system or files, support booting Raspberry Pi from NVMe Solid State Drive
  • Onboard Connectors Including MIPI / M.2 / HDMI / USB / ETH / TF Card Slot.each cut-out is completely aligned with the connector
  • Rich WiKi Resources: We provide official Wiki resources, please contact us for more information.
  • 46,99 € AUF AMAZON
Geekworm
Geekworm
Geekworm X1004 Dual M.2 NVMe SSD Shield PCIe Peripheral Board for Raspberry Pi 5
Kostenloser Versand
star

75

GUTE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#9

  • 【Compatibility】only for Raspberry Pi 5 16GB / 8GB / 4GB (NOT included)
  • 【Support Dual M2 SSD】Compatible with M.2 KEY-M NVMe SSD 2280 (NOT included)
  • 【How to Power】5Vdc +/-5%, 5A via Raspberry Pi 5. Recommend to use Geekworm PD 27W power adapter (ASIN: B0CP8SRXSC); or GaN PD 27W power supply (ASIN: B0CZCZF2QV)
  • 【Support NVMe Boot】X1004 now supports NVMe boot with the latest eeprom (2024/05/17 version)
  • 【Packing List】1 x X1004 PCIe to M2 NVMe Shield, 1x Accessories Pack
  • 【Matching Case (NOT included)】Refer to P579-V2 Case (ASIN: B0CRB3DT5M), or P579-V2 Case with active cooler (ASIN: B0CT4P893Q)
  • 【Note】Since X1004 is using ASMedia ASM1182e PCIe switch, it can't support PCIe Gen 3 speed, so even though we forced to turn on PCIe Gen 3.0 setting in Raspberry Pi 5, it is limited by ASMedia ASM1182e PCIe switch. speed is still PCIe Gen 2.0 speed.
  • 38,50 € AUF AMAZON
Waveshare
Waveshare
Waveshare Mini Base Board (B) Designed for Raspberry Pi Compute Module 5, Onboard EEPROM & Encryption Chip, Suitable for Evaluating The Raspberry Pi CM5 Or Being Integrated Into End Products
Kostenloser Versand
star

66

GUTE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#10

  • As the IO board of the Raspberry Pi Compute Module 5, CM5-IO-BASE-B is a baseboard that can be used with the Raspberry Pi Compute Module 5. With powerful features are integrated into a compact design, it is only the size of a bank card. It comes with two USB3.2 Gen1 ports and two USB2.0 ports onboard, making it convenient for users.
  • Type C can be used as a USB SLAVE interface to flash images. The USB ports have a total maximum power output of 2A. Onboard default 2 USB 3.2 Gen1 ports
  • Supports 4 screens to display different contents, adds MIPI DSI driver, regardless of whether a screen is connected, the system will default to connect, the screen will display in split-screen mode (related to the system version)
  • The onboard BOOT button, you can press the BOOT button before powering on, and connect to the computer through Type C to let the device enter the flashing mode
  • Do not plug or unplug any device other than USB and HDMI when the device is powered on. Do not connect other devices when using Type C to flash. Insufficient power supply for burning will cause the device to be unrecognized
  • 34,99 € AUF AMAZON
raspberry pi cm4 io board raspberry io board raspberry pi 4 io board raspberry pi cm5 io board raspberry pi io raspberry pi board raspberry pi ups board breakout board raspberry pi raspberry pi breakout board raspberry pi io broker