main logo

Raspberry Pi Io Hat

Die 10 besten Produkte von Dezember 2025
Letzte Aktualisierung: 10. Dezember 2025
FREENOVE
FREENOVE
Freenove Breakout Board for Raspberry Pi 5 / 4B / 3B+ / 3B / 3A+ / 2B / 1B+ / 1A+ / Zero 2 W/Zero W/Zero, Terminal Block Shield HAT with Pin Header, GPIO Status LED
star

99

MAXIMALE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#1 GEWINNER

  • Compatible Models: Raspberry Pi 5 / 4B / 3B+ / 3B / 3A+ / 2B / 1B+ / 1A+ / Zero 2 W / Zero W / Zero (Note: NOT compatible with 500 / 400)
  • GPIO Status LED: LED on if GPIO outputs / inputs high level, LED off if GPIO outputs / inputs low level
  • Independent LED: The status LED is driven by the chip instead of the GPIO so the GPIO will not be affected
  • Terminal Block and Header: Connect to all pins of Raspberry Pi's 40-pin GPIO header, 2.54 mm (0.1 inch) pitch
  • Pin Name: The BCM numbering name of each pin is printed next to it
  • 11,95 € AUF AMAZON
GeeekPi
GeeekPi
GeeekPi Raspberry Pi GPIO Screw Terminal Block Breakout Board HAT with GPIO Status LED, Raspberry Pi GPIO Expansion Board Breakout Module for Raspberry Pi 4B/3B+/3B/2B/B+/Pi Zero W/Pi Zero 2 W
16% Rabatt
star

96

BESTE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#2

  • This is a very beautiful screw terminal expansion version, which is expanded for the pins of the Raspberry Pi. Compatible with Raspberry Pi 4B/3B+/3B/2B/B+/Pi Zero/Pi Zero W/Pi Zero 2 W.
  • It is convenient for everyone to connect when doing electronic experiments. Terminal Block Pitch is 3.5mm. Wire Gauge Range is 16 to 26AWG.Stripping Length is 5mm.There is the pin out information of the GPIO pin on the top of the terminal and on the side.
  • The status information of the pin is displayed. When the GPIO pin is operated and effective in the terminal, the LED matrix on the right side of the terminal will display the status of the GPIO pin, and some distinctions are made in the color selection of the LED lights.
  • The 5V power light is red, while the 3.3V power light is pink, the light of the special function pin is dark blue, and the indicator light of the ordinary GPIO pin is light blue, which is convenient and convenient for connection Observing the state is a good helper for electronic experiments.The positions of the LEDs correspond to the positions of the 2x20pin connectors of the Raspberry Pi.
  • Package Includes: 1x Screw Terminal Block Breakout Board, 1x Screw Kit, 1x Screw Driver, 1x Assembly Instruction
  • Anwendungsvideo:https://www.youtube.com/watch?v=G0xsN9pTVZc
  • 16,78 € AUF AMAZON
DFRobot
DFRobot
IO Expansion HAT for Raspberry Pi 4B/3B+, IO-Erweiterungshut für Raspberry Pi 4B / 3B +
star

94

TOP QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#3

  • Dieser IO-Erweiterungshut von DFRobot ist der perfekte Begleiter für Ihren Raspberry Pi 4B/3B+! Es führt alle IO-Ports auf Raspberry Pi einschließlich digitalem Anschluss, analogem Anschluss, PWM, IIC, UART, SPI und IIS.
  • Dieser Hut ist völlig kompatibel mit der DFRobot Gravity Serie, die Benutzer von komplizierten Verbindungsarbeiten befreit und es ihnen ermöglicht, sich einfach auf ihre Projekte zu konzentrieren.
  • Raspberry Pi GPIO-Pins funktionieren mit einem maximalen Logikpegel von 3,3 V.
  • Neben dem Sensor und dem Modul der 3,3-V-Stromversorgung unterstützt das Produkt auch: Sensor und Modul mit 5-V-Stromversorgung und 3,3-V-Pegel; externe PWM-Stromversorgung (6-12 V); Steuerung mehrerer Servos
  • 11,88 € AUF AMAZON
iiunius
iiunius
Stack HAT Raspberry pi I/O Expansion Shield Onboard 5 Sets 2x20 Connector to Directly Connect Multiple Expansion Functional Boards
star

90

HOHE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#4

  • Standard Raspberry Pi connectivity, directly pluggable OR through ribbon cable
  • 5 sets of 2x20 pinheaders, connect multi HATs together
  • USB external power port, provides enough power supply for multi HATs; Clear and descriptive pin labels for easy use
  • Reserved jumper pads on the bottom side, pin connections are changeable by soldering, to avoid pin conflicts
  • Note: make sure there are no any pin conflicts between the HATs you want to use together before connecting
  • 19,02 € AUF AMAZON
KEYESTUDIO
KEYESTUDIO
KEYESTUDIO Raspberry Pi PICO IO Shield for Raspberry Pi Pico Development Board
14% Rabatt
star

83

SICHERE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#5

  • This Raspberry Pico IO shield is designed for the Raspberry Pi Pico development board. Note Raspberry Pico is Not Included!
  • It also incorporates communications ports like 2 x I2C, 2 x UART, 2 x SPI, 3 x analog IO and 13 x digital IO as well as a 6.5-12V power interface.
  • On board with four block building holes can assist to wire up multiple sensors or modules, which exceedingly increases more functions.
  • DC input voltage: 6.5-12V ; Output voltage: DC3.3V V
  • There are 26 GPIO pins, so you will be motivated to create what you want to make.
  • 11,99 € AUF AMAZON
Waveshare
Waveshare
Waveshare Raspberry Pi Stack HAT I/O Expansion Shield with 5 Sets 2x20 Connector Stacks Up to 5 Hats at Once
star

82

SICHERE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#6

  • Standard Raspberry Pi connectivity, directly pluggable OR through ribbon cable
  • 5 sets of 2x20 pinheaders, connect multi HATs together
  • USB external power port, provides enough power supply for multi HATs; Clear and descriptive pin labels for easy use.
  • Reserved jumper pads on the bottom side, pin connections are changeable by soldering, to avoid pin conflicts
  • Note: make sure there are no any pin conflicts between the HATs you want to use together before connecting.
  • 19,82 € AUF AMAZON
Waveshare
Waveshare
Waveshare AW9523B IO Expansion Board for Raspberry Pi/Arduino/STM32,Expands 16 I/O Pins,Allow 4 Expansion Boards at The Same Time,Expand Up to 64 I/O Ports,I2C Interface
star

79

GUTE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#7

  • Support driving 16-ch common anode constant current LED, 256-step linear dimming, current controllable.Output interrupt (INT) signal when changing the state of an input port
  • Onboard voltage translator, compatible with 3.3V/5V level.
  • Provides two connector options: PH2.0 header and/or solder pads, allows multi I2C modules to be stacked
  • I2C address configurable by shorting the A0/A1 jumpers; I2C bus, allows expanding 16 I/O ports by just using two wires
  • Provide online development resources and manual (examples for Raspberry Pi / micro:bit / Ardui / STM32)
  • 12,90 € AUF AMAZON
Waveshare
Waveshare
Waveshare 2-Channel Isolated CAN Expansion HAT for Raspberry Pi with MCP2515 + SN65HVD230 Dual Chips Solution and Multi Onboard Protection Circuits
star

75

GUTE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#8

  • 2-Channel CAN HAT For Raspberry Pi： 2-Channel Isolated CAN Bus Expansion, Multi Onboard Protection Circuits
  • What Can It Do?：Enable Isolated And Stable CAN Bus Capability For Your Raspberry Pi
  • Designed For Raspberry Pi Series：Standard Raspberry Pi 40PIN GPIO Header, Customized For Raspberry Pi Series Boards
  • 2-Channel CAN Capability：MCP2515 CAN Controller + SN65HVD230 CAN Transceiver; Electrical Isolation Circuitry Safe & Stable: SM24CANB TVS Diode, ESD Protection, Transient Peak Voltage Protection
  • Flexible And Handy Jumpers: Easily Select 3.3V / 5V Operating Voltage, Or Enable/Disable 120Ω Terminal Resistor, Via Onboard Jumpers
  • 34,99 € AUF AMAZON
Waveshare
Waveshare
Waveshare RS485 CAN HAT Supports Raspberry Pi Series Boards Allows Stable Long-Distance Communication
star

71

GUTE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#9

  • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards.
  • CAN function, onboard CAN controller MCP2515 via SPI interface, onboard transceiver SN65HVD230.
  • RS485 function, controlled via UART, half-duplex communication, supports automatic TX/RX control without programming, onboard transceiver SP3485.
  • Onboard TVS (Transient Voltage Suppressor), effectively suppress surge voltage and transient spike voltage in the circuit for RS485 transceiving, lightningproof & anti-electrostatic.
  • Reserved control pins, allows to work with other control boards. Comes with development resources and manual (examples in wiringPi/python).
  • 19,99 € AUF AMAZON
Waveshare
Waveshare
Waveshare CM5 IO Board Metal Case, Compatible with Raspberry Pi Official Compute Module 5 IO Board, Comes with Cooling Fan
star

67

GUTE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#10

  • Designed for Raspberry Pi official Compute Module 5 IO Board; Mini computer chassis, robust and nice looking
  • Make it easy to build your own Raspberry Pi CM5 mini PC
  • the standard 40PIN GPIO header is still available, making it easy to connect sorts of HATs
  • Each cut-out is completely aligned with the connector; Comes with cooling fan, combined with the airflow vent, better heat dissipation
  • Wall mount holes on two sides, handy for mounting. Binocular Vision, PoE Powered Raspberry Pi Projects, Or Other Industrial Context
  • 26,99 € AUF AMAZON
raspberry pi io hat raspberry pi raspberry pi hat raspberry pi 4 io raspberry pi io board raspberry pi 24v io raspberry pi display hat raspberry pi hat display raspberry pi wifi hat raspberry pi zero hat