main logo

Phaetus Nozzle

Die 10 besten Produkte von Juni 2025
Letzte Aktualisierung: 12. Juni 2025
Phaetus
Phaetus
Phaetus PS M6 Plated Copper Nozzle 0,4 mm - 1,75 mm - 1 pcs
Kostenloser Versand
star

98

MAXIMALE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#1 GEWINNER

  • Temperature resistance up to 500℃, the best choice for special engineering plastics such as PEEK.
  • High thermal performance keeps an even temperature of nozzle tip during printing, thus guaranteeing a stable extrusion; Meanwhile, further improves printing speed without sacrificing the quality.
  • Special processing technology and post-treatment make the nozzle without burr at the edge of tip and without debris in the hole. Inner hole roughness lower than Ra0.4 and the whole nozzle nickel plated, Enhanced higher smoothness and less adhesion.
  • Superior quality copper alloy with high strength and high thermal conductivity ensures the stability of performance.
  • High temperature performance, working well for high temperature applications, printing with materials such as PEEK, PEKK, PEI, PSU, PPSU and etc.
  • 12,99 € AUF AMAZON
Phaetus
Phaetus
Phaetus PS M6 Hardened Steel Nozzle 0,4 mm - 1,75 mm - 1 pcs
25% Rabatt Kostenloser Versand
star

97

BESTE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#2

  • Hardness over HRC60 makes an minimum wear at the hole size after a long time printing with abrasive materials.
  • Temperature resistance up to 450℃, easily handling with special engineering plastics such as PEEK.
  • Special processing technology and post-treatment make the nozzle without burr at the edge of tip and without debris in the hole. Inner hole roughness lower than Ra0.4; Higher smoothness and less adhesion. Min. orifice diameter 0.1mm/±0.01mm in experimental level application, making sure high accuracy printing.
  • High quality imported die steel material ensures the stability of performance.
  • Wear-resistance, High temperature performance, suitable for 3D printing composites with abrasive additives such as Carbon Fiber, Steel, Wood, Boron Carbide, Tungsten and Phosphorescent pigment as well as conventional materials.
  • 14,99 € AUF AMAZON
Phaetus
Phaetus
Phaetus PS M6 Hardened Steel Nozzle 0,6 mm - 1,75 mm - 1 pcs
Kostenloser Versand
star

96

BESTE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#3

  • Hardness over HRC60 makes an minimum wear at the hole size after a long time printing with abrasive materials.
  • Temperature resistance up to 450℃, easily handling with special engineering plastics such as PEEK.
  • Special processing technology and post-treatment make the nozzle without burr at the edge of tip and without debris in the hole. Inner hole roughness lower than Ra0.4; Higher smoothness and less adhesion. Min. orifice diameter 0.1mm/±0.01mm in experimental level application, making sure high accuracy printing.
  • High quality imported die steel material ensures the stability of performance.
  • Wear-resistance, High temperature performance, suitable for 3D printing composites with abrasive additives such as Carbon Fiber, Steel, Wood, Boron Carbide, Tungsten and Phosphorescent pigment as well as conventional materials.
  • 14,99 € AUF AMAZON
Phaetus
Phaetus
Phaetus PS M6 Plated Copper Nozzle 0,6 mm - 1,75 mm - 1 pcs
Kostenloser Versand
star

91

HOHE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#4

  • Temperature resistance up to 500℃, the best choice for special engineering plastics such as PEEK.
  • High thermal performance keeps an even temperature of nozzle tip during printing, thus guaranteeing a stable extrusion; Meanwhile, further improves printing speed without sacrificing the quality.
  • Special processing technology and post-treatment make the nozzle without burr at the edge of tip and without debris in the hole. Inner hole roughness lower than Ra0.4 and the whole nozzle nickel plated, Enhanced higher smoothness and less adhesion.
  • Superior quality copper alloy with high strength and high thermal conductivity ensures the stability of performance.
  • High temperature performance, working well for high temperature applications, printing with materials such as PEEK, PEKK, PEI, PSU, PPSU and etc.
  • 12,99 € AUF AMAZON
PrimaCreator
PrimaCreator
Phaetus x PrimaCreator MK8 Tungsten Nozzle 0,4 mm - 1 pcs
Kostenloser Versand
star

87

SICHERE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#5

  • Super Wear-Resistance | Using the world's leading ultra-high hardness tungsten carbide (hardness > 2700Hv (up to 2900Hv)), super wear resistance ensures long-term printing without wearness of nozzle hole and tip flat.
  • High Temperature Performance | Composed of tungsten carbide and copper alloy with super hardness and excellent conductivity, maximum printing temperature can be 550°C.
  • Low Pushing Force | Tungsten Carbide Nozzle with high purity more than 99.98% and high thermal performance keeps an even temperature of nozzle tip during printing, thus guaranteeing a stable extrusion.
  • Faster Speed | Due to the high thermal performance of the nozzle in general, the printing speed can be pushed even further without sacrificing the quality. Unique passageway in the nozzle improves the flow rate at the inner hole faster.
  • Low Friction | The whole nozzle is applied with DLC coating after adding a hard and smooth nickel plating layer. Surface friction coefficient is as low as 0.05 which makes the nozzle with clean printing, without plastic sticking to it.
  • 42,60 € AUF AMAZON
Phaetus
Phaetus
Phaetus PS M6 Brass Nozzle 0,4 mm - 1,75 mm - 1 pcs
Kostenloser Versand
star

82

SICHERE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#6

  • Min. orifice diameter 0.1mm/±0.01mm in experimental level application, making sure high accuracy printing.
  • Special processing technology and post-treatment make the nozzle without burr at the edge of tip and without debris in the hole; Lasting gloss for a long time without oxidation.
  • Inner hole roughness lower than Ra0.4; Higher smoothness and less adhesion.
  • First-class quality brass material ensures the stability of properties.
  • Wide application with high cost performance, printing well with conventional material, such as PLA, ABS, TPU, PA, PP, PC, ASA, Nylon, PETG, PVA, HIPS and etc.
  • 9,99 € AUF AMAZON
PrimaCreator
PrimaCreator
Phaetus x PrimaCreator RepRap M6 Tungsten Nozzle 0,4 mm - 1,75 mm - 1 pcs
Kostenloser Versand
star

78

GUTE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#7

  • Super Wear-Resistance | Using the world's leading ultra-high hardness tungsten carbide (hardness > 2700Hv (up to 2900Hv)), super wear resistance ensures long-term printing without wearness of nozzle hole and tip flat.
  • High Temperature Performance | Composed of tungsten carbide and copper alloy with super hardness and excellent conductivity, maximum printing temperature can be 550°C.
  • Low Pushing Force | Tungsten Carbide Nozzle with high purity more than 99.98% and high thermal performance keeps an even temperature of nozzle tip during printing, thus guaranteeing a stable extrusion.
  • Faster Speed | Due to the high thermal performance of the nozzle in general, the printing speed can be pushed even further without sacrificing the quality. Unique passageway in the nozzle improves the flow rate at the inner hole faster.
  • Low Friction | The whole nozzle is applied with DLC coating after adding a hard and smooth nickel plating layer. Surface friction coefficient is as low as 0.05 which makes the nozzle with clean printing, without plastic sticking to it.
  • 49,99 € AUF AMAZON
Phaetus
Phaetus
Phaetus NexTruder Prusa SiC Nozzle              
Kostenloser Versand
star

78

GUTE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#8

  • The Phaetus NexTruder Prusa SiC Nozzle is built for durability and precision, featuring a silicon carbide nozzle with EndCoat coating for superior wear resistance. With a flow rate of 21mm/s, it is perfect for high-speed printing of abrasive composite filaments.
  • 22,00 € AUF AMAZON
Phaetus
Phaetus
Phaetus PS M6 Hardened Steel Nozzle 0,8 mm - 1,75 mm - 1 pcs
Kostenloser Versand
star

72

GUTE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#9

  • Hardness over HRC60 makes an minimum wear at the hole size after a long time printing with abrasive materials.
  • Temperature resistance up to 450℃, easily handling with special engineering plastics such as PEEK.
  • Special processing technology and post-treatment make the nozzle without burr at the edge of tip and without debris in the hole. Inner hole roughness lower than Ra0.4; Higher smoothness and less adhesion. Min. orifice diameter 0.1mm/±0.01mm in experimental level application, making sure high accuracy printing.
  • High quality imported die steel material ensures the stability of performance.
  • Wear-resistance, High temperature performance, suitable for 3D printing composites with abrasive additives such as Carbon Fiber, Steel, Wood, Boron Carbide, Tungsten and Phosphorescent pigment as well as conventional materials.
  • 14,99 € AUF AMAZON
Phaetus
Phaetus
Phaetus PS M6 Brass Nozzle 0,8 mm - 1,75 mm - 1 pcs
star

70

GUTE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#10

  • Min. orifice diameter 0.1mm/±0.01mm in experimental level application, making sure high accuracy printing.
  • Special processing technology and post-treatment make the nozzle without burr at the edge of tip and without debris in the hole; Lasting gloss for a long time without oxidation.
  • Inner hole roughness lower than Ra0.4; Higher smoothness and less adhesion.
  • First-class quality brass material ensures the stability of properties.
  • Wide application with high cost performance, printing well with conventional material, such as PLA, ABS, TPU, PA, PP, PC, ASA, Nylon, PETG, PVA, HIPS and etc.
  • 14,80 € AUF AMAZON
phaetus nozzle prusa phaetus dragonfly nozzle phaetus dragon nozzle phaetus dragonfly hic nozzle phaetus tungsten carbide nozzle phaetus dragon hf nozzle phaetus phaetus dragonfly bms nozzle