main logo

Phaetus Dragonfly Nozzle

Die 10 besten Produkte von Oktober 2025
Letzte Aktualisierung: 11. Oktober 2025
Phaetus
Phaetus
Phaetus PS M6 Hardened Steel Nozzle 0,4 mm - 1,75 mm - 1 pcs
Kostenloser Versand
star

99

MAXIMALE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#1 GEWINNER

  • Hardness over HRC60 makes an minimum wear at the hole size after a long time printing with abrasive materials.
  • Temperature resistance up to 450℃, easily handling with special engineering plastics such as PEEK.
  • Special processing technology and post-treatment make the nozzle without burr at the edge of tip and without debris in the hole. Inner hole roughness lower than Ra0.4; Higher smoothness and less adhesion. Min. orifice diameter 0.1mm/±0.01mm in experimental level application, making sure high accuracy printing.
  • High quality imported die steel material ensures the stability of performance.
  • Wear-resistance, High temperature performance, suitable for 3D printing composites with abrasive additives such as Carbon Fiber, Steel, Wood, Boron Carbide, Tungsten and Phosphorescent pigment as well as conventional materials.
  • 14,99 € AUF AMAZON
Phaetus
Phaetus
Phaetus PS M6 Plated Copper Nozzle 0,4 mm - 1,75 mm - 1 pcs
Kostenloser Versand
star

96

BESTE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#2

  • Temperature resistance up to 500℃, the best choice for special engineering plastics such as PEEK.
  • High thermal performance keeps an even temperature of nozzle tip during printing, thus guaranteeing a stable extrusion; Meanwhile, further improves printing speed without sacrificing the quality.
  • Special processing technology and post-treatment make the nozzle without burr at the edge of tip and without debris in the hole. Inner hole roughness lower than Ra0.4 and the whole nozzle nickel plated, Enhanced higher smoothness and less adhesion.
  • Superior quality copper alloy with high strength and high thermal conductivity ensures the stability of performance.
  • High temperature performance, working well for high temperature applications, printing with materials such as PEEK, PEKK, PEI, PSU, PPSU and etc.
  • 12,99 € AUF AMAZON
Phaetus
Phaetus
Phaetus x Creality SiC K1C Integrated Nozzle    
Kostenloser Versand
star

95

TOP QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#3

  • The Creality x Phaetus SiC Integrated K1C Nozzle combines durability and high-speed performance, featuring a silicon carbide nozzle and EndCoat coating for 7 times longer service life. Its high flow capacity of 30mm/s makes it ideal for printing abrasive composite filaments in industrial-grade applications.
  • 24,00 € AUF AMAZON
Creality
Creality
Creality K2 Plus/Hi Silicon Carbide Nozzle, Upgrades x Phaetus Unicorn Quick-Swap Hotend Nozzles, Offizielles 3D Drucker High Flow Zubehör, Spezialisiert auf Multi-Filaments Printing Part（0.4mm）
Kostenloser Versand
star

90

HOHE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#4

  • 7X Lebensdauer: Creality x Phaetus integrierte Düsen wurden auf hohe Wärmeleitfähigkeit und abriebfeste Siliziumkarbiddüsen aufgerüstet, die bis zu sieben Mal länger halten als gewöhnliche gehärtete Stahldüsen. Hinweis: Nur für 3D-Drucker der Creality K2 Plus/Hi Serie
  • Hochgeschwindigkeitsdruck: Creality K2 Plus Siliziumkarbid Düsenkammer wurde vergrößert, und mit einer 0,4mm Kaliber Düse, ist die maximale Durchflussrate bis zu 30mm³/s, realisiert High-Speed-Druck einen Schritt schneller
  • Multi-Filamente Drucken: Creality K2 Plus Hotend-Düse ist spezialisiert auf den Druck von Verbundmaterialien wie PLA, PETG, ABS, TPU, Kohlefaser, Glasfaser, Stahl, Holz, Borcarbid, Wolfram, Phosphorpigment
  • Hohe Verschleißfestigkeit: Der Halsbereich ist speziell mit EndCoat mit einer Härte von HV3300 beschichtet, um den Innenläufer vor Verschleiß zu schützen. Leistungsstarkes Siliziumkarbid sorgt dafür, dass der Düsenverschleiß bei langen, hochintensiven Druckläufen stark reduziert wird
  • Handwerkliche Exzellenz: Die 3D-Druckdüse 0,4 mm hat ein integriertes Ganzmetalldesign für eine einfache Montage und Demontage. Die Gelenke sind fest eingepasst für kontinuierlichen Druck ohne Leckage
  • 29,99 € AUF AMAZON
Phaetus
Phaetus
Phaetus PS M6 Hardened Steel Nozzle 0,6 mm - 1,75 mm - 1 pcs
Kostenloser Versand
star

87

SICHERE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#5

  • Hardness over HRC60 makes an minimum wear at the hole size after a long time printing with abrasive materials.
  • Temperature resistance up to 450℃, easily handling with special engineering plastics such as PEEK.
  • Special processing technology and post-treatment make the nozzle without burr at the edge of tip and without debris in the hole. Inner hole roughness lower than Ra0.4; Higher smoothness and less adhesion. Min. orifice diameter 0.1mm/±0.01mm in experimental level application, making sure high accuracy printing.
  • High quality imported die steel material ensures the stability of performance.
  • Wear-resistance, High temperature performance, suitable for 3D printing composites with abrasive additives such as Carbon Fiber, Steel, Wood, Boron Carbide, Tungsten and Phosphorescent pigment as well as conventional materials.
  • 14,99 € AUF AMAZON
PrimaCreator
PrimaCreator
Phaetus x PrimaCreator MK8 Tungsten Nozzle 0,4 mm - 1 pcs
Kostenloser Versand
star

82

SICHERE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#6

  • Super Wear-Resistance | Using the world's leading ultra-high hardness tungsten carbide (hardness > 2700Hv (up to 2900Hv)), super wear resistance ensures long-term printing without wearness of nozzle hole and tip flat.
  • High Temperature Performance | Composed of tungsten carbide and copper alloy with super hardness and excellent conductivity, maximum printing temperature can be 550°C.
  • Low Pushing Force | Tungsten Carbide Nozzle with high purity more than 99.98% and high thermal performance keeps an even temperature of nozzle tip during printing, thus guaranteeing a stable extrusion.
  • Faster Speed | Due to the high thermal performance of the nozzle in general, the printing speed can be pushed even further without sacrificing the quality. Unique passageway in the nozzle improves the flow rate at the inner hole faster.
  • Low Friction | The whole nozzle is applied with DLC coating after adding a hard and smooth nickel plating layer. Surface friction coefficient is as low as 0.05 which makes the nozzle with clean printing, without plastic sticking to it.
  • 44,03 € AUF AMAZON
Phaetus
Phaetus
Phaetus Dragonfly Hot-End BMS                    
Kostenloser Versand
star

78

GUTE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#7

  • Ganzmetall-Set mit hoher Temperaturbeständigkeit bis 500 °C.
  • Das Material des heißen Endstücks besteht hauptsächlich aus Kupferlegierung, die sich schneller erwärmt und Wärme besser ableitet.
  • Der konische Einbau von Heatbreak und Kühlkörper sorgt für eine perfekte Wärmeableitung.
  • Die innere Lochrauhigkeit des Heatbreaks ist Ra≤0,3, was eine gleichmäßigere Bewegung des Filaments ermöglicht und zu einer höheren Auflösung der Drucke führt.
  • 59,90 € AUF AMAZON
SAPLUSREPRAP
SAPLUSREPRAP
V6 Ganzmetall Hotend Bimetall Druckkopf: Kompatibel mit E3D V6/Voron 2.4/Prusa I3 MK3/MK3S/Titan Extruder/Phaetus Dragonfly/Red Lizard Hotend,550°C Hochtemperatur/High Flow Hotend,blau,von SAPLUSREPRA
Kostenloser Versand
star

76

GUTE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#8

  • High precision production and processing: The products are processed by cnc machines imported from Japan, using strict production tolerance and assembly requirements to ensure product precision, nozzle diameter tolerance +-0.01, smooth bore, Uniform filament output, Ensure accurate printing results every time
  • High temperature resistance of 550 ° C: High quality laminated copper heatblock, better maintaining precise temperature control, high-precision hardened steel nozzle, temperature resistance up to 550 ° C for the most demanding tasks,compatible with all filaments, from basic polylactic acid to customized medical grade PAEK
  • Superior Cooling: this V6 Full Metal hotend is designed of copper and titanium alloys constructed heatbreak, 3 times heat dissipation compared to old heat sinks。The ultra-thin titanium alloy heatbreak has a wall thickness of only 0.25 millimeters, ensuring excellent thermal insulation performance, eliminating thermal creep and clogging, improving stability, and providing you with better printing effects
  • Versatile Compatibility: The xxxxxx works seamlessly with E3D V6/Voron 2.4/Prusa i3 MK3 and MK3S, Prusa MK3S+, Prusa i3/ Phaetus Dragon/Dragonfly/Rapido/Red Lizard 3D printers hotend, Titan Extruder, and Dual Driver Extruder
  • Supports a wide range of materials: The V6 Hotend can be used with a wide range of 1.75mm filaments, including PLA, ABS, PETG, TPU, PP, PA, PC, nylon,PEEK, PEI and PLA-CF, ABS-CF, PETG-CF, PA-CF/GF as well as composite materials with abrasive additives such as steel, wood, carbon fiber,boron carbide, tungsten and fluorescent filaments, providing flexibility to meet a wide range of printing needs
  • 39,99 € AUF AMAZON
Phaetus
Phaetus
Phaetus Dragonfly HIC HF Hot-End                
star

70

GUTE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#9

  • The HF version uses a lengthened nozzle design, which is more suitable for high flow and high speed printing
  • The HF version uses a one-piece welded nozzle for higher strength and better airtightness
  • The HF version's heat break kit adopts side envelope surface type fixed structure: stable and reliable with the possibility of quick replacement
  • Longer nozzle and heat block: larger melting cavity, suitable for high flow and high speed printing.
  • 0.25mm wall thickness heat break: excellent heat insulation, no filament blocking. Copper alloy / hardened steel material, meet high temperature, wear-resistant material printing
  • 78,99 € AUF AMAZON
Phaetus
Phaetus
Phaetus Dragonfly BMS/BMO Heat Break Kit        
Kostenloser Versand
star

67

GUTE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#10

  • Heat Break for Pheatus Dragonfly BMO and BMS Hotends
  • 24,99 € AUF AMAZON
phaetus dragonfly hic nozzle phaetus nozzle phaetus dragonfly bms nozzle phaetus dragonfly phaetus nozzle prusa