main logo

Phaetus Tungsten Carbide Nozzle

Die 10 besten Produkte von Oktober 2025
Letzte Aktualisierung: 11. Oktober 2025
PrimaCreator
PrimaCreator
Phaetus x PrimaCreator MK8 Tungsten Nozzle 0,4 mm - 1 pcs
Kostenloser Versand
star

99

MAXIMALE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#1 GEWINNER

  • Super Wear-Resistance | Using the world's leading ultra-high hardness tungsten carbide (hardness > 2700Hv (up to 2900Hv)), super wear resistance ensures long-term printing without wearness of nozzle hole and tip flat.
  • High Temperature Performance | Composed of tungsten carbide and copper alloy with super hardness and excellent conductivity, maximum printing temperature can be 550°C.
  • Low Pushing Force | Tungsten Carbide Nozzle with high purity more than 99.98% and high thermal performance keeps an even temperature of nozzle tip during printing, thus guaranteeing a stable extrusion.
  • Faster Speed | Due to the high thermal performance of the nozzle in general, the printing speed can be pushed even further without sacrificing the quality. Unique passageway in the nozzle improves the flow rate at the inner hole faster.
  • Low Friction | The whole nozzle is applied with DLC coating after adding a hard and smooth nickel plating layer. Surface friction coefficient is as low as 0.05 which makes the nozzle with clean printing, without plastic sticking to it.
  • 44,03 € AUF AMAZON
Creality
Creality
Creality K2 Plus/Hi Silicon Carbide Nozzle, Upgrades x Phaetus Unicorn Quick-Swap Hotend Nozzles, Offizielles 3D Drucker High Flow Zubehör, Spezialisiert auf Multi-Filaments Printing Part（0.4mm）
Kostenloser Versand
star

96

BESTE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#2

  • 7X Lebensdauer: Creality x Phaetus integrierte Düsen wurden auf hohe Wärmeleitfähigkeit und abriebfeste Siliziumkarbiddüsen aufgerüstet, die bis zu sieben Mal länger halten als gewöhnliche gehärtete Stahldüsen. Hinweis: Nur für 3D-Drucker der Creality K2 Plus/Hi Serie
  • Hochgeschwindigkeitsdruck: Creality K2 Plus Siliziumkarbid Düsenkammer wurde vergrößert, und mit einer 0,4mm Kaliber Düse, ist die maximale Durchflussrate bis zu 30mm³/s, realisiert High-Speed-Druck einen Schritt schneller
  • Multi-Filamente Drucken: Creality K2 Plus Hotend-Düse ist spezialisiert auf den Druck von Verbundmaterialien wie PLA, PETG, ABS, TPU, Kohlefaser, Glasfaser, Stahl, Holz, Borcarbid, Wolfram, Phosphorpigment
  • Hohe Verschleißfestigkeit: Der Halsbereich ist speziell mit EndCoat mit einer Härte von HV3300 beschichtet, um den Innenläufer vor Verschleiß zu schützen. Leistungsstarkes Siliziumkarbid sorgt dafür, dass der Düsenverschleiß bei langen, hochintensiven Druckläufen stark reduziert wird
  • Handwerkliche Exzellenz: Die 3D-Druckdüse 0,4 mm hat ein integriertes Ganzmetalldesign für eine einfache Montage und Demontage. Die Gelenke sind fest eingepasst für kontinuierlichen Druck ohne Leckage
  • 29,99 € AUF AMAZON
Phaetus
Phaetus
Phaetus x Creality SiC K1C Integrated Nozzle    
Kostenloser Versand
star

92

TOP QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#3

  • The Creality x Phaetus SiC Integrated K1C Nozzle combines durability and high-speed performance, featuring a silicon carbide nozzle and EndCoat coating for 7 times longer service life. Its high flow capacity of 30mm/s makes it ideal for printing abrasive composite filaments in industrial-grade applications.
  • 24,00 € AUF AMAZON
Phaetus
Phaetus
Phaetus PS M6 Hardened Steel Nozzle 0,4 mm - 1,75 mm - 1 pcs
Kostenloser Versand
star

91

HOHE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#4

  • Hardness over HRC60 makes an minimum wear at the hole size after a long time printing with abrasive materials.
  • Temperature resistance up to 450℃, easily handling with special engineering plastics such as PEEK.
  • Special processing technology and post-treatment make the nozzle without burr at the edge of tip and without debris in the hole. Inner hole roughness lower than Ra0.4; Higher smoothness and less adhesion. Min. orifice diameter 0.1mm/±0.01mm in experimental level application, making sure high accuracy printing.
  • High quality imported die steel material ensures the stability of performance.
  • Wear-resistance, High temperature performance, suitable for 3D printing composites with abrasive additives such as Carbon Fiber, Steel, Wood, Boron Carbide, Tungsten and Phosphorescent pigment as well as conventional materials.
  • 14,99 € AUF AMAZON
Phaetus
Phaetus
Phaetus PS M6 Hardened Steel Nozzle 0,6 mm - 1,75 mm - 1 pcs
Kostenloser Versand
star

83

SICHERE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#5

  • Hardness over HRC60 makes an minimum wear at the hole size after a long time printing with abrasive materials.
  • Temperature resistance up to 450℃, easily handling with special engineering plastics such as PEEK.
  • Special processing technology and post-treatment make the nozzle without burr at the edge of tip and without debris in the hole. Inner hole roughness lower than Ra0.4; Higher smoothness and less adhesion. Min. orifice diameter 0.1mm/±0.01mm in experimental level application, making sure high accuracy printing.
  • High quality imported die steel material ensures the stability of performance.
  • Wear-resistance, High temperature performance, suitable for 3D printing composites with abrasive additives such as Carbon Fiber, Steel, Wood, Boron Carbide, Tungsten and Phosphorescent pigment as well as conventional materials.
  • 14,99 € AUF AMAZON
Phaetus
Phaetus
Phaetus PS M6 Plated Copper Nozzle 0,4 mm - 1,75 mm - 1 pcs
Kostenloser Versand
star

82

SICHERE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#6

  • Temperature resistance up to 500℃, the best choice for special engineering plastics such as PEEK.
  • High thermal performance keeps an even temperature of nozzle tip during printing, thus guaranteeing a stable extrusion; Meanwhile, further improves printing speed without sacrificing the quality.
  • Special processing technology and post-treatment make the nozzle without burr at the edge of tip and without debris in the hole. Inner hole roughness lower than Ra0.4 and the whole nozzle nickel plated, Enhanced higher smoothness and less adhesion.
  • Superior quality copper alloy with high strength and high thermal conductivity ensures the stability of performance.
  • High temperature performance, working well for high temperature applications, printing with materials such as PEEK, PEKK, PEI, PSU, PPSU and etc.
  • 12,99 € AUF AMAZON
Phaetus
Phaetus
Phaetus PS M6 Hardened Steel Nozzle 0,8 mm - 1,75 mm - 1 pcs
Kostenloser Versand
star

80

GUTE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#7

  • Hardness over HRC60 makes an minimum wear at the hole size after a long time printing with abrasive materials.
  • Temperature resistance up to 450℃, easily handling with special engineering plastics such as PEEK.
  • Special processing technology and post-treatment make the nozzle without burr at the edge of tip and without debris in the hole. Inner hole roughness lower than Ra0.4; Higher smoothness and less adhesion. Min. orifice diameter 0.1mm/±0.01mm in experimental level application, making sure high accuracy printing.
  • High quality imported die steel material ensures the stability of performance.
  • Wear-resistance, High temperature performance, suitable for 3D printing composites with abrasive additives such as Carbon Fiber, Steel, Wood, Boron Carbide, Tungsten and Phosphorescent pigment as well as conventional materials.
  • 14,99 € AUF AMAZON
Phaetus
Phaetus
Phaetus PS Hardened Steel Ruby Nozzle V2 0,4 mm - 1,75 mm - 1 pcs
Kostenloser Versand
star

78

GUTE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#8

  • Ruby Structural optimization | The structure of the ruby optimized with a 60° cone angle at the feeding port makes the flow rate at the inner hole faster and prevents the nozzle clogging.
  • Nano-coating | Applying DLC nano-coating on the whole nozzle makes the friction coefficient of the inner and outer wall of nozzle is only 0.03, which greatly reduces the problem of filament sticking.
  • Combined structure | The combined assembly structure of ruby tip and nozzle body reduces filament leakage caused by the ruby falling or shifting, which finally improves the printing reliability.
  • Hardened steel material | Hardened steel with a hardness of HRC60 and above, which is the first choice for abrasive and high temperature materials printing.
  • The Phaetus Ruby Nozzle can Compatible with all consumables, such as PLA, ABS, PETG, TPU, PP, PC, Nylon, PEEK, PEI and composites with abrasive additives such as Carbon Fibre, Steel, Wood, Boron Carbide, Tungsten and Phosphorescent pigment.
  • 99,00 € AUF AMAZON
Phaetus
Phaetus
Phaetus PS Hardened Steel Ruby Nozzle V2 0,8 mm - 1,75 mm - 1 pcs, A019-04C-12-M
Kostenloser Versand
star

72

GUTE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#9

  • Ruby Structural optimization | The structure of the ruby optimized with a 60° cone angle at the feeding port makes the flow rate at the inner hole faster and prevents the nozzle clogging.
  • Nano-coating | Applying DLC nano-coating on the whole nozzle makes the friction coefficient of the inner and outer wall of nozzle is only 0.03, which greatly reduces the problem of filament sticking.
  • Combined structure | The combined assembly structure of ruby tip and nozzle body reduces filament leakage caused by the ruby falling or shifting, which finally improves the printing reliability.
  • Hardened steel material | Hardened steel with a hardness of HRC60 and above, which is the first choice for abrasive and high temperature materials printing.
  • The Phaetus Ruby Nozzle can Compatible with all consumables, such as PLA, ABS, PETG, TPU, PP, PC, Nylon, PEEK, PEI and composites with abrasive additives such as Carbon Fibre, Steel, Wood, Boron Carbide, Tungsten and Phosphorescent pigment.
  • 99,00 € AUF AMAZON
Phaetus
Phaetus
Phaetus PS M6 Brass Nozzle 0,8 mm - 1,75 mm - 1 pcs
Kostenloser Versand
star

70

GUTE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#10

  • Min. orifice diameter 0.1mm/±0.01mm in experimental level application, making sure high accuracy printing.
  • Special processing technology and post-treatment make the nozzle without burr at the edge of tip and without debris in the hole; Lasting gloss for a long time without oxidation.
  • Inner hole roughness lower than Ra0.4; Higher smoothness and less adhesion.
  • First-class quality brass material ensures the stability of properties.
  • Wide application with high cost performance, printing well with conventional material, such as PLA, ABS, TPU, PA, PP, PC, ASA, Nylon, PETG, PVA, HIPS and etc.
  • 9,99 € AUF AMAZON
tungsten carbide nozzle phaetus nozzle