Sata Hat Raspberry Pi 5
Die 10 besten Produkte von Juni 2025
Letzte Aktualisierung:
8. Juni 2025
Geekworm
Geekworm X1100 2.5" SATA HDD/SSD Shield for Raspberry Pi 5
Kostenloser Versand
99
MAXIMALE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#1 GEWINNER
▼ Mehr anzeigen
▲ Weniger anzeigen
【Compatibility】only for Raspberry Pi 5 8GB / 4GB (NOT included)
【2.5" SATA HDD/SSD Supported】Compatible with 2.5-inch SATA hard disk drives (HDD) / solid-state drive (SSD). The HDD / SSD are NOT included
【How to Power】5Vdc +/-5%, 5A via Raspberry Pi 5. Recommend to use Raspberry Pi official power adapter, or Geekworm PD 27W power adapter (ASIN: B0CP8SRXSC)
【Packing List】1 x X1100 Shield, 1x Screws Pack accessories
【Matching Case (NOT included)】Refer to X1100-C1 Case ASIN: B0D7VFTHTD
32,00 € AUF AMAZON
APBVIHL
Raspberry Pi 5 Penta-SATA-Hut mit oberer Platine – bis zu 5 x SATA-Disks HAT
97
BESTE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#2
▼ Mehr anzeigen
▲ Weniger anzeigen
Lieferumfang: 1 x Penta-Sata-Hut + Oberteil
Perfekt unterstützt von der Raspberry Pi 5-Serie
Die perfekte NAS-Server-Lösung: 4 Sata + 1 eSata-Schnittstelle
Flexible Power-Schnittstellen-Optionen: Standard-ATX-Stromschnittstelle oder 12-V-DC-Stromschnittstelle
Zusätzliche Erweiterungsschnittstellen: Entwickelt zur Unterstützung von OLED-Display und Lüfter
117,67 € AUF AMAZON
AllNet
ALLnet SATA HAT Quad NAS Raspberry Pi® Erweiterungs-Platine Passend für (Entwicklungskits): Raspbe
94
TOP QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#3
▼ Mehr anzeigen
▲ Weniger anzeigen
bis zu 4x HDD/SSD's - 2,5 oder 3,5 Zoll Speicher werden unterstützt. multipliziert zwei unabhängige USB3-Busse auf Raspberry Pi 4
DC-Stromeingang 12V/5A
Unterstützung für 2,5 Zoll Laufwerke und Raspberry Pi 4
Externe Standard-ATX-Netzteilunterstützung für 3,5-Zoll-Festplatten
Lüfter und Kühlkörper für Raspberry Pi 4 CPU-Kühlung
64,54 € AUF AMAZON
Geekworm
Geekworm X1001 PCIe to M.2 NVMe Key-M SSD Shield for Raspberry Pi 5
Kostenloser Versand
89
HOHE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#4
▼ Mehr anzeigen
▲ Weniger anzeigen
【Compatibility】Only for Raspberry Pi 5 8GB / 4GB (NOT included)
【Matching Case (NOT included)】P579 (ASIN: B0CRB3DT5M); Or P579 Case with Official Active Cooler (ASIN: B0CT4P893Q)
【M2 Key-M NVMe SSD Supported】Support M.2 KEY-M NVMe SSD 2230/2242/2260/2280 length installation.【IMPORTANT】DON'T use NVMe SSD with Phison controller, please refer to: https://wiki.geekworm.com/X1001#Important_Notes
【How to Power】Use 5Vdc +/-5%, 5A to power via Raspberry Pi 5, and Pi 5 will power X1001 via FFC PCIe ribbon. Recommend to use Geekworm PD 27W power adapter (ASIN: B0CP8SRXSC)
【Packing List】1 x X1001 Shield, 1x Accessories Pack
12,95 € AUF AMAZON
Raspberry Pi
PCIe M.2 HAT für Raspberry Pi 5, M-Key
Kostenloser Versand
84
SICHERE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#5
▼ Mehr anzeigen
▲ Weniger anzeigen
Unterstützt einspurige PCIe 2.0-Schnittstelle (500 MB/s Spitzenübertragungsrate)
Unterstützt Geräte, die den M.2-M-Key-Edge-Anschluss verwenden. Unterstützt Geräte mit dem Formfaktor 2230 oder 2242
Kann angeschlossene M.2-Geräte mit bis zu 3 A versorgen. Inklusive Power- und Aktivitäts-LEDs
Entspricht der Raspberry Pi HAT+ Spezifikation
Lieferung mit Flachbandkabel, 16 mm Stapelkopf, Gewindeabstandshalter und Schrauben und gerändelter Doppelflanschschraube zur Sicherung und Unterstützung des M.2-Peripheriegeräts
15,11 € AUF AMAZON
GeeekPi
GeeekPi Quad FPC PCIe HAT for Raspberry Pi 5, B14 HAT 1 to 4 PCIe Interface with 40Pin GPIO Pin Header for Raspberry Pi 5
Kostenloser Versand
80
GUTE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#6
▼ Mehr anzeigen
▲ Weniger anzeigen
Quad PCIe Expansion --- Effortlessly expand your Raspberry Pi 5's FPC PCIe interface into 4, providing users with the convenience of connecting multiple PCIe devices simultaneously for increased productivity and versatility.
Daisy-Chaining Capability --- Connect multiple B14 units in a cascading fashion to create a multi-tiered PCIe configuration, allowing for expanded connectivity options and customized setups tailored to your specific needs.
Enhanced Connectivity --- Unlock the potential to connect a wide range of PCIe devices, such as SSDs, GPUs, network cards, and more, expanding the capabilities of your Raspberry Pi 5 for diverse applications and projects.
Robust and Reliable Design --- Built with quality and durability in mind, the B14 Raspberry Pi HAT ensures stable and reliable performance, providing a dependable solution for your PCIe expansion needs.
Quad Board Expansion: This feature allows for the connection of two additional Pineberry Pi boards, providing users with the flexibility to expand their projects' scope and functionality.
ASMedia PCIe Switch Integration --- The board incorporates an ASMedia PCIe Switch (Gen2 variant), facilitating reliable and efficient data transfer between connected devices.
Included FPC Ribbon Cables --- Three FPC ribbon cables are provided, simplifying the connection process and offering flexibility in setup and configuration.
Wiki: https://wiki.52pi.com/index.php?title=EP-0233
39,99 € AUF AMAZON
Waveshare
Waveshare UPS HAT (B) for Raspberry Pi 5V Uninterruptible Power Supply 5A High Current with Pogo Pins Connector
Kostenloser Versand
81
GUTE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#7
▼ Mehr anzeigen
▲ Weniger anzeigen
Designed for Raspberry Pi series, compatible with Raspberry Pi 3 / 3B+ / 4B, etc.
I2C bus communication, monitoring the batteries voltage, current, power, and remaining capacity in real time
Multi battery protection circuits: over charge/discharge protection, over current protection, short circuit protection, and reverse protection, along with the equalizing charge feature, more safe and stable
Onboard 5V regulator, up to 5A continuous output current, more sufficient power source for Raspberry Pi
5V USB output, convenient for powering other boards Batteries warning indicators, easy to check if the battery is connected correctly
31,99 € AUF AMAZON
UGREEN
UGREEN Festplattengehäuse 2,5 Zoll USB C 3.2 Gen 2 auf SATA III bis zu 6 Gbps Externes Gehäuse für SSD und HDD in Höhe 9.5mm/7mm UASP unterstützt, SATA Gehäuse mit USB C 3.1Kabel werkzeugfreie Montage
41% Rabatt
Kostenloser Versand
76
GUTE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#8
▼ Mehr anzeigen
▲ Weniger anzeigen
Super Geschwindigkeit: Durch leistungstarkes USB C 3.2 Gen 2 Port bis zu 6Gbps, Zudem unterstützt das 2.5 Zoll SATA Festplattengehäuse UASP Protokoll, welches bei der Kopplung mit UASP fähigem Host-Kontroller eine bis zu 70% höhere Geschwindigkeit als übliches USB 3.0 bietet.
Praktische Funktion TRIM, SMART und Ruhemodus: Das 2.5 Zoll SSD Gehäuse mit USB C Anschluss unterstützt TRIM, S.M.A.R.T für SSD Festplatten und intelligentes Ruhemodus für alle SATA Festplatten. TRIM und SMART Funktion dient zur optimalerem Schreibperformance und Selbstüberwachnung. Nach 3 Minuten der Inaktivität wird das externe Festplattengehäuse in Standy-Mode gehen, den Strom zur Festplatte abzuschalten und Ihre Festplatte mehr nachhaltig zu machen.
Mehrer Sicherheit: Das 2.5 Zoll SATA Gehäuse aus stabilem ABS Kunststoff besitze gute Wärmeableitung und Stoßfestigkeit. Darüber hinaus kann der innen befindende EVA Schwamm Ihre 2.5 Zoll HDD oder SSD sicher festhalten und vor Kratzer bei der Installation schützen. Eingebaute Multischutzsystem sichert Ihre hochwertige 2.5 Zoll Festplatten vor Überstrom, Überspannung und Überhitzung.
Kinderleichte Montage ohne Werkzeug: Werkzeuglose Konstruktion macht den Einbau oder Wechsel des Laufwerks bequemer und zeitsparender. Dank abnehmbares Designs lässt sich das USB C Kabel mit der Länge 50cm auf dem Schreibtisch einfach ordnen, um Kabelsalat zu verhindern.
Umfassende Kompatibilität: Das 2 5 Zoll Festplattengehäuse ermöglicht 2,5 Zoll SATA SSD/HDD Festplatten in Höhen 9,5mm und 7mm, an meisten USB oder USB C/Thunderbolt 3 fähige Geräte wie Fernseher, Router, PS5/4, Xbox, MacBook, MacBook Pro, iMac, Laptop, PC anzuschließen und unterstützt die Festplatten in großer Kapazität bis zu 6TB. Plug & Play, Keine Treberinstallation unter Windows XP/7/8/10/11, Linus, Mac OS 8.0 und höheres.
11,89 € AUF AMAZON
Waveshare
Waveshare PoE HAT (G), Compatible with Raspberry Pi 5, 5V 5A Output, Stable Performance, Supports 802.3af/at Network Standard, Power Over Ethernet HAT (G), Suitable for RPi 5 Official Case
Kostenloser Versand
74
GUTE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#9
▼ Mehr anzeigen
▲ Weniger anzeigen
✅Power Over Ethernet HAT For Raspberry Pi 5, Supports IEEE 802.3af/at Network Standard, 5V 5A Output, Compatible With Raspberry Pi 5 Official Case
✅Standard Raspberry Pi 40PIN GPIO header. PoE capability,IEEE 802.3af/at-compliant
✅By using with a PoE router or switch that supports the IEEE 802.3af/at network standard, it is possible to provide both network connection and power supply for your Raspberry Pi in only one Ethernet cable.
✅Onboard original IC solution for more stable PoE power performance
✅Adopts non-isolated switched-mode power supply (SMPS). Compact and easy to assemble
26,99 € AUF AMAZON
Geekworm
Geekworm for Raspberry Pi 4, X862 V2.0 M.2 Key-B SATA SSD Storage Expansion Board with USB 3.1 Connector Support Key-B 2280 SSD
Kostenloser Versand
67
GUTE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#10
▼ Mehr anzeigen
▲ Weniger anzeigen
【Important Note】Pls format the new SSD before use.
【Raspberry Pi 4 NGFF SATA SSD Shield】X862 V2.0 Adapter supports M.2 SATA SSD Key-B 2280 length for Raspberry Pi 4 8GB/4GB/2GB/1GB (NOT include Raspberry Pi board or SSD). UASP supported, NOT support TRIM
【How to Power】√ Model 1. power via Raspberry Pi 4: USB-C 5V ≥3A (recommend 5V 4A 20W power adapter ASIN: B09J4V3RYK); √ Model 2. power via X735 if working the X735: USB-C 5V ≥3A (recommend 5V 4A 20W power adapter ASIN: B09J4V3RYK) OR 6-30V with DC 5521 Jack (recommend 12V 5A 60W power adapter ASIN: B0BD81W6SN)
【Allows booting OS from HDD/SSD 】Booting OS from your HDD/SSD for faster app opens, web serving and file copying, pls refer to: raspberrypiwiki (Does_the_X825/X855_support_USB_boot)
【Matching Metal Case(not included)】No matching case now. X857-C3 Case (ASIN: B08VJC5CD4) for X862 and Raspberry Pi 4 is out of stock and off-production.
30,00 € AUF AMAZON
raspberry pi 5 hat sata
raspberry pi 5 sata hat
penta sata hat raspberry pi 5
raspberry pi 5 pcie sata hat
raspberry pi 5 sata
sata raspberry pi 5
raspberry pi 5 sata hat 3.5
raspberry pi 5 sata ssd hat
hat raspberry pi 5
raspberry pi 5 hat