Raspberry Pico Lora Hat
Die 10 besten Produkte von Oktober 2025
Letzte Aktualisierung:
9. Oktober 2025
Waveshare
Waveshare SX1262 868M LoRa HAT, Compatible with Raspberry Pi, for Europe/Asia/Africa
Kostenloser Versand
98
MAXIMALE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#1 GEWINNER
▼ Mehr anzeigen
▲ Weniger anzeigen
With standard 40PIN GPIO header, for Raspberry Pi series boards. Onboard USB TO UART converter, for serial debugging; Brings the UART control interface, for connecting host boards like STM32; 4x LED indicators, easy to check the module status(Note: This SX1262 868M LoRa HAT uses a private protocol and does not support LoRaWAN. If you need one that supports the LoRaWAN network protocol, please choose Pico-LoRa-SX1262-868M, which can be matched with LoRaWAN gateway SX1302 LoRaWAN Gateway HAT)
LoRa spread spectrum modulation technology, up to 81 available signal channel, longer communication distance, more robust to interference; Auto multi-level repeating, suit for ultra long range communication, allows multi network on the same region
Low power consumption features like deep sleeping and Wake on Radio, ideal for batt-powered applications; Customizable communication key which won't be retrieved, greatly improves the security of user data
Supports LBT, monitoring the signal channel noise before transmitting, greatly improves the success ratio under extreme environment; Supports RSSI signal intensity indicating, for evaluating signal quality, tuning the network
Supports wireless parameter configuration, by sending wireless command/data packet, remotely configure or retrieve the module parameter; Supports fixed-point transmission, broadcast, signal channel monitor; Comes with development resources and manual (examples for Raspberry Pi/STM32)
35,99 € AUF AMAZON
Coolwell
SX1262 LoRa HAT for Raspberry Pi/Arduino/STM32 Spread Spectrum Modulation up to 81 Available Signal Channel 868MHz Frequency Band Allows Data Transmission up to 5km
97
BESTE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#2
▼ Mehr anzeigen
▲ Weniger anzeigen
Standard Pi 40PIN GPIO extension header, fits Raspberry Pi series boards;Onboard CP2102 USB TO UART converter, for serial debugging; Brings the UART control interface, for connecting host boards like Arduino/STM32;4x LED indicators, easy to check the module status
LoRa spread spectrum modulation technology, up to 81 available signal channel, longer communication distance, more robust to interference;Auto multi-level repeating, suit for ultra long range communication, allows multi network on the same region
Low power consumption features like deep sleeping and Wake on Radio, ideal for battery-powered applications;Customizable communication key which won't be retrieved, greatly improves the security of user data
Supports LBT, monitoring the signal channel noise before transmitting, greatly improves the success ratio under extreme environment;Supports RSSI signal intensity indicating, for evaluating signal quality, tuning the network; Supports wireless parameter configuration, by sending wireless command/data packet, remotely configure or retrieve the module parameter;Supports fixed-point transmission, broadcast, signal channel monitor
Comes with development resources and manual (examples for Raspberry Pi/STM32), download: www.waveshare.com/wiki/SX1262_868M_LoRa_HAT
34,95 € AUF AMAZON
Waveshare
Waveshare SX1262 LoRa HAT for Raspberry Pi Spread Spectrum Modulation 868MHz Auto Multi-Level Repeating Supports Wireless Parameter Configuration & Fixed-Point Transmission Support Meshtastic Project
Kostenloser Versand
93
TOP QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#3
▼ Mehr anzeigen
▲ Weniger anzeigen
Comparing with normal LoRa modules, the SX1262 LoRa HAT achieves longer communication distance, higher rate, lower consumption, better safety and anti-interference. It is suitable for industrial control, smart home, data collection, etc. (Note: This SX1262 868M LoRa HAT uses a private protocol and does not support LoRaWAN. If you need one that supports the LoRaWAN network protocol, please choose Pico-LoRa-SX1262-868M, which can be matched with LoRaWAN gateway SX1302 LoRaWAN Gateway HAT)
By utilizing the new generation LoRa spread spectrum modulation technology, the communication distance of the module is as long as 5km, also supports auto repeating to transmit longer. Other features include Wake on Radio, wireless config, carrier sensing, communication key, and so on.
Onboard CP2102 USB TO UART converter, for serial debugging. Brings the UART control interface, for connecting host boards like Arduino/STM32. 4x LED indicators, easy to check the module status. LoRa spread spectrum modulation technology, up to 81 available signal channel, longer communication distance, more robust to interference.
Auto multi-level repeating, suit for ultra long range communication, allows multi network on the same region. Low power consumption features like deep sleeping and Wake on Radio, ideal for batt-powered applications. Customizable communication key which won't be retrieved, greatly improves the security of user data.
Supports LBT, monitoring the signal channel noise before transmitting, greatly improves the success ratio under extreme environment. Supports RSSI signal intensity indicating, for evaluating signal quality, tuning the network. Supports wireless parameter configuration, by sending wireless command/data packet, remotely configure or retrieve the module parameter. Supports fixed-point transmission, broadcast, signal channel monitor.
35,99 € AUF AMAZON
Waveshare
Waveshare SX1262 LoRa Node Module for Raspberry Pi Pico Support LoRaWAN Protocol EU868 Band Support Meshtastic Project, Without 3.7V 600mAh Li-po Batt
88
HOHE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#4
▼ Mehr anzeigen
▲ Weniger anzeigen
Standard Raspberry Pi Pico header, supports Raspberry Pi Pico series boards
Supports LoRaWAN protocol and EU868 band
PH1.25 batt and recharge controller, allows connecting rechargeable Lithium batt(3.7V 600mAh Li-po Batt Not included)
2x LED indicators for monitoring module operating status
Can provide with development resources and manual (C example programs and user manuals, etc.)
21,99 € AUF AMAZON
Coolwell
SX1262 LoRa Node Module for Raspberry Pi Pico Series Boards, Support LoRaWAN Protocol, Different Frequency Bands Available (868M)
82
SICHERE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#5
Waveshare
SX1262 LoRa Node Module for Raspberry Pi Pico Series Boards, Support LoRaWAN Protocol, Different Frequency Bands Available (433M)
81
GUTE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#6
▼ Mehr anzeigen
▲ Weniger anzeigen
Adopts active temperature compensation crystal oscillator, ensuring stable long-term operating in extreme high/low temperature conditions
Supports FSK, GFSK, LoRa modulations, outstanding block resistance and ultra long communication distance
PH1.25 battery header and recharge controller, allows connecting rechargeable Lithium battery
High receiving sensitivity (up to -148dBm), programmable emitting power (up to 22dBm)
Supports preamble detection, with CRC, up to 256 bytes data packet engine
22,50 € AUF AMAZON
IBest
SX1262 868M LoRa HAT Board for Raspberry Pi/Arduino/STM32,Spread Spectrum Modulation Covers 868MHz Frequency Band Support Data Transmission up to 5km via Serial Port
81
GUTE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#7
▼ Mehr anzeigen
▲ Weniger anzeigen
This is a Raspberry Pi LoRa HAT based on SX1262, covers 868MHz frequency band. It allows data transmission up to 5km through serial port.
By utilizing the new generation LoRa spread spectrum modulation technology, the communication distance of the module is as long as 5km, also supports auto repeating to transmit longer.
Other features include Wake on Radio, wireless config, carrier sensing, communication key, and so on.
Comparing with normal LoRa modules, the SX1262 LoRa HAT achieves longer communication distance, higher rate, lower consumption, better safety and anti-interference.
It is suitable for various applications such as industrial control, smart home, data collection, etc.
35,65 € AUF AMAZON
IBest
SX1268 LoRa HAT Board for Raspberry Pi/Arduino/STM32, 433MHz Frequency Band, Spread Spectrum Modulation Support Data Transmission up to 5km via Serial Port
75
GUTE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#8
▼ Mehr anzeigen
▲ Weniger anzeigen
This is a Raspberry Pi LoRa HAT based on SX1268, covers 433MHz frequency band. It allows data transmission up to 5km through serial port.
By utilizing the new generation LoRa spread spectrum modulation technology, the communication distance of the module is as long as 5km, also supports auto repeating to transmit longer.
Other features include Wake on Radio, wireless config, carrier sensing, communication key, and so on.
Comparing with normal LoRa modules, the SX1268 LoRa HAT achieves longer communication distance, higher rate, lower consumption, better safety and anti-interference.
It is suitable for various applications such as industrial control, smart home, data collection, etc.
32,99 € AUF AMAZON
Raspberry Pi
Raspberry Pi Sense HAT
Kostenloser Versand
72
GUTE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#9
▼ Mehr anzeigen
▲ Weniger anzeigen
Offizielles Add‑On‑Board: Von der Raspberry Pi Foundation entwickelt, bekannt durch das Astro Pi-Projekt auf der ISS.
Vielseitige Sensoren an Bord: Misst Temperatur, Luftfeuchtigkeit, Luftdruck sowie Bewegung und Orientierung dank integrierter Sensoren für Umgebungs- und Lageerfassung.
8 × 8 RGB‑LED‑Matrix: Zur Anzeige von Daten, Texten oder Animationen – ideal für visuelle Ausgaben und Projekte.
Mini‑Joystick (5‑Wege): Interaktive Steuerung für Spiele, Menüs oder eigene Applikationen.
Kompatibel mit Raspberry Pi: Funktioniert mit allen Pi-Modellen mit 40‑Pin‑GPIO – einschließlich Pi 4, Pi 400 und Zero.
Einfache Integration: Python-Bibliothek und Beispielcode sind im Raspberry Pi OS enthalten – sofort startklar.
Ideal für MINT-Unterricht und junge Technikbegeisterte: Perfekt für Schulen, Lernprojekte, Workshops und kreative Anwendungen mit Bildungsfokus.
Langfristige Verfügbarkeit: Offiziell unterstützt bis mindestens 2028 – Planungssicherheit für Bildung und Entwicklung.
39,83 € AUF AMAZON
Adafruit
Adafruit CYBERDECK HAT für Raspberry Pi 400 & 500, 4863
Kostenloser Versand
70
GUTE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#10
▼ Mehr anzeigen
▲ Weniger anzeigen
EINFACHE INSTALLATION - Der CYBERDECK HAT kommt komplett vormontiert und getestet zu dir, sodass du ihn einfach nur anschließen musst. Kein Basteln oder Löten nötig!
VIELSEITIGE DISPLAYOPTIONEN - Erweitere deine Möglichkeiten mit einer Vielzahl von tollen Displays, die perfekt mit dem CYBERDECK HAT funktionieren. Wähle aus verschiedenen Größen und Touch-Optionen für dein individuelles Setup!
STEMMA QT KOMPATIBILITÄT - Mit den integrierten STEMMA / STEMMA QT Anschlüssen kannst du ganz einfach NeoPixels, Servos oder Sensoren hinzufügen. Hol dir das Zubehör und bring deine Projekte auf das nächste Level!
IDEAL FÜR RASPBERRY PI 400 & 500 - Dieser HAT wurde speziell für den Raspberry Pi 400 und 500 konzipiert, um dir eine optimale Leistung zu bieten. Perfekt für alle, die mit ihrem Pi kreativ werden wollen!
22,97 € AUF AMAZON
raspberry pi pico hat
raspberry pi pico lora
raspberry pi lora hat
lora raspberry
raspberry lora
raspberry pi zero lora hat
raspberry pico