main logo

Raspberry Pi Gnss Hat

Die 10 besten Produkte von Dezember 2025
Letzte Aktualisierung: 9. Dezember 2025
Waveshare
Waveshare
Waveshare MAX-M8Q GNSS HAT for Raspberry Pi with Multi-Constellation Receiver Support and Support Augment Systems Like SBAS QZSS IMES and D-GPS
star

99

MAXIMALE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#1 GEWINNER

  • Multi-constellation receiver support, concurrent reception of up to 3 types of GNSS satellite systems from GPS, Beidou, Galileo, and GLONASS, and still retains low power consumption. Augment systems support, including SBAS, QZSS, IMES, D-GPS, improving the positioning performance of service location
  • A-GNSS (Assisted GNSS) support, reducing the first positioning time when powered up, improving the acquisition sensitivity. Features -167dBm navigating sensitivity and outstanding ability for anti-spoofing & anti-jamming, supports geo-fencing
  • Supports U-Center, an easy way to config the module. Standard Raspberry Pi 40PIN GPIO extension header. Supports Raspberry Pi series boards, Jetson Nano. Onboard USB TO UART converter CP2102 for serial debugging
  • Breakouts the module's UART and I2C interface, for connecting with host boards like Arduino/STM32. Baudrate range: 4800~921600bps (9600bps by default). Supports DDC (I2C compliant) interface: up to 400KHz (max)
  • Onboard batt holder, supports ML1220 rechargeable cell, for preserving ephemeris information and hot starts. 4x LEDs for indicating the module operating status. Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)
  • 55,99 € AUF AMAZON
Coolwell
Coolwell
Coolwell Cat-1/GSM/GPRS/GNSS HAT for Raspberry Pi Raspberry Pi 5 4B+ 4B 3B+ 3B 2B+ Zero W WH Jetson Nano Based On A7670E Module GNSS Positioning Support LTE Cat-1 / 2G
Kostenloser Versand
star

98

MAXIMALE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#2

  • For Raspberry Pi 5 Cat-1/GSM/GPRS/GNSS HAT, standard Raspberry Pi 40PIN GPIO extension header, fits Raspberry Pi series boards
  • For Arduino Cat-1/GSM/GPRS/GNSS HAT, breakout common used control pins of the A7670E module, make it easy to connect with hosts boards like for Arduino/STM32
  • For Jetson Nano Cat-1/GSM/GPRS/GNSS HAT, supports protocols including TCP/IP, HTTP(s), MQTT(s), FTP(s), and SSL; Supports GPS, BeiDou, GLONASS positioning
  • Supports dial-up, telephone call, SMS; supports LBS base station positioning, it is able to get the approximate position info via mobile network
  • Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)
  • 41,27 € AUF AMAZON
Adafruit
Adafruit
Adafruit CYBERDECK HAT für Raspberry Pi 400 & 500, 4863
Kostenloser Versand
star

93

TOP QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#3

  • EINFACHE INSTALLATION - Der CYBERDECK HAT kommt komplett vormontiert und getestet zu dir, sodass du ihn einfach nur anschließen musst. Kein Basteln oder Löten nötig!
  • VIELSEITIGE DISPLAYOPTIONEN - Erweitere deine Möglichkeiten mit einer Vielzahl von tollen Displays, die perfekt mit dem CYBERDECK HAT funktionieren. Wähle aus verschiedenen Größen und Touch-Optionen für dein individuelles Setup!
  • STEMMA QT KOMPATIBILITÄT - Mit den integrierten STEMMA / STEMMA QT Anschlüssen kannst du ganz einfach NeoPixels, Servos oder Sensoren hinzufügen. Hol dir das Zubehör und bring deine Projekte auf das nächste Level!
  • IDEAL FÜR RASPBERRY PI 400 & 500 - Dieser HAT wurde speziell für den Raspberry Pi 400 und 500 konzipiert, um dir eine optimale Leistung zu bieten. Perfekt für alle, die mit ihrem Pi kreativ werden wollen!
  • 22,97 € AUF AMAZON
Waveshare
Waveshare
Waveshare Pi GSM/GPRS/GNSS HAT Expansion Board with Low-Power Consumption Based on SIM868 Compatible with Raspberry Pi 2B 3B Zero Zero W
star

89

HOHE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#4

  • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano; Supports SIM application toolkit: SAT Class 3, GSM 11.14 Release 99, USAT; Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)
  • Supports SMS, phone call, GPRS, DTMF, HTTP, FTP, MMS, email, etc.Support GPS, COMPASS, Glonass, LBS base station positioning, omni-positioning; Supports data transferring
  • Onboard USB TO UART converter CP2102 for UART debugging; 6x LEDs for indicating the module working status; SIM card slot for 1.8V/3V SIM card
  • RTC with backup batt holder;Baudrate auto detection (1200bps ~115200bps); Control via AT commands (3GPP TS 27.007, 27.005, and SIMCOM enhanced AT Commands);
  • Supports SIM application toolkit: GSM 11.14 Release 99;
  • 39,99 € AUF AMAZON
Waveshare
Waveshare
Waveshare 4G/3G/2G/GSM/GPRS/GNSS Hat for Raspberry Pi 4 Jetson Nano Based on SIM7600E-H Supports LTE CAT4 for Downlink Data Transfer
Kostenloser Versand
star

84

SICHERE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#5

  • The SIM7600E-H 4G HAT is a 4G/3G/2G communication and GNSS positioning module, which supports LTE CAT4 up to 150Mbps for downlink data transfer. it is pretty low power consumption.
  • You can connect this 4G module with computer to surf the Internet, or attach it onto Raspberry Pi to enable functions like 4G high speed connection, wireless communication, making telephone call, sending SMS, global positioning, etc.
  • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano. Supports SIM application toolkit: SAT Class 3, GSM 11.14 Release 99, USAT.
  • Baudrate: 300bps ~ 4Mbps (default: 115200bps). Autobauding baudrate: 9600bps ~ 115200bps. Control via AT commands (3GPP TS 27.007, 27.005, and V.25TER command set).
  • Supports dial-up, telephone call, SMS , mail, TCP, UDP, DTMF, HTTP, FTP, etc. Supports GPS, BeiDou, Glonass, LBS base station positioning.
  • 85,99 € AUF AMAZON
IBest
IBest
waveshare NB-IoT/eMTC/Edge/GPRS/GNSS HAT for Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+ Based on SIM7000E Support TCP, UDP, PPP, HTTP, FTP, MQTT, SMS, Mail,GNSS Positioning
star

82

SICHERE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#6

  • Raspberry Pi connectivity, compatible with Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+,Comes with development resources and manual (examples for Raspberry Pi/Arduino/STM32)
  • Supports TCP, UDP, PPP, HTTP, FTP, MQTT, SMS, Mail, etc., Supports GNSS positioning (GPS,GLONASS,BeiDou and Galileo).Supports SIM application toolkit: SAT Class 3, GSM 11.14 Release 98, USAT
  • Onboard USB interface, to test AT Commands, get GPS positioning data, and so on.Onboard voltage translator, 3.3V by default, allows to be switched to 5V via 0Ω resistor
  • Breakout UART control pins, to connect with host boards like Arduino/STM32.SIM card slot, compatible with both normal SIM card and NB-IoT specific card
  • 2x LED indicators, easy to monitor the working status,Baudrate: 300bps~3686400bps,Control via AT commands (3GPP TS 27.007, 27.005, and SIMCOM enhanced AT Commands)
  • 42,92 € AUF AMAZON
Waveshare
Waveshare
Waveshare SIM868 GSM/GPRS/GNSS HAT, Compatible with Raspberry Pi, for Easily Realizing Functions Like Making Calls, Sending Text Messages, Wireless Internet Access, etc
star

79

GUTE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#7

  • Specially design for Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards; Supports SIM application toolkit: GSM 11.14 Release 99
  • Supports SMS, phone call, GPRS, DTMF, HTTP, FTP, MMS, email, etc; Supports GPS, COMPASS, Glonass, LBS base station positioning, omni-positioning
  • supports data transferring; Baudrate auto detection (1200bps ~115200bps); Control via AT commands (3GPP TS 27.007, 27.005, and SIMCOM enhanced AT Commands)
  • Onboard USB to UART converter for UART debugging; 6x LEDs for indicating the module working status; SIM card slot for 1.8V/3V SIM card
  • RTC with backup batt holder; Comes with development resources and manual (examples for Raspberry Pi/STM32)
  • 39,99 € AUF AMAZON
Waveshare
Waveshare
Waveshare Cat-1/GSM/GPRS/GNSS HAT, Compatible with Raspberry Pi, Based On A7670E Module, LTE Cat-1 / 2G Support, GNSS Positioning
star

76

GUTE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#8

  • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards
  • Supports protocols including TCP/IP, HTTP(s), MQTT(s), FTP(s), and SSL. Supports dial-up, telephone call, SMS
  • Supports LBS base station positioning, it is able to get the approximate position info via mobile network
  • Supports GPS, BeiDou, GLONASS positioning. TTS (Text To Speech) feature, texts in Chinese/English can be converted into spoken words
  • Onboard USB interface, for testing AT Commands, network communication, and so on. Onboard audio jack for sound recording, making telephone calls, listening the TTS resulting speech, etc.
  • Breakout common used control pins of the A7670E module, make it easy to connect with hosts boards like Arduino/STM32. SIM card slot, supports 1.8V/3V SIM card
  • 2x LED indicators, easy to monitor the operating status. Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)
  • It is suitable for IoT applications like remote information processing, monitoring devices, POS, industrial routers, remote diagnosis, satellite positioning, and so on.
  • 42,99 € AUF AMAZON
LUCKFOX
LUCKFOX
LUCKFOX 4G HAT for Raspberry Pi, Based on Waveshare SIM7600E-H, Enabling LTE Cat-4 4G/3G/2G Communication & GNSS Positioning, Compatible with Raspberry Pi Series Boards/Jetson Nano
star

73

GUTE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#9

  • Equipped with standard Pi 40PIN GPIO expansion head, and compatible with Raspberry Pi series boards/Jetson Nano. Support dialing, telephone calling, SMS/TCP/UDP/DTMF/HTTP/FTP, etc
  • Support GPS/BeiDou/Glonass/GALILEO/QZSS/LBS base station positioning. The onboard USB interface is used to test AT commands, obtain GPS positioning data, etc. On board 2102 USB to UART converter for serial debugging. Disconnect the UART control pin for connecting STM32 and other motherboards
  • SIM card slot, supporting 1.8V/3V SIM card. TF card slot, used to store files, messages and other data. Car audio jack and audio decoder for making calls. 2 LED indicators, easy to monitor operation status
  • On board voltage converter, the working voltage can be configured as 3.3V or 5V through jumpers. Baudrate: 300bps ~ 4Mbps (default: 115200bps). Autobauding baudrate: 9600bps ~ 115200bps. Control via AT command (3GPP TS 27.007, 27.005 and V.25TER command set)
  • Support SIM application kit: SAT Class 3, GSM 11.14 Release 99, USAT. Provide online development resources and manuals (examples for Raspberry Pi/Jetson Nano/STM32). Please ask 24-hour customer service for relevant manual
  • 75,99 € AUF AMAZON
Waveshare
Waveshare
Waveshare L76K GPS HAT for Raspberry Pi, GPS/BeiDou (BDS) / GLONASS/QZSS Support
Kostenloser Versand
star

64

GUTE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#10

  • L76K GPS HAT, a Multi-GNSS (Global Navigation Satellite System) module, supports GPS, BeiDou (BDS), GLONASS and QZSS systems, allows multi-system combined or single-system independent positioning. Supports AGNSS function, built-in low-noise amplifier and sound surface filter, provides a good positioning experience of fast, accurate, high-performance.
  • Standard Raspberry Pi 40PIN GPIO header, supports Raspberry Pi / Jetson / RDK series boards. Supports Multi-GNSS systems: GPS, BeiDou (BDS), GLONASS and QZSS
  • Built-in Low-Noise Amplifier (LNA) for improved reception sensitivity. Built-in SAW Filter for enhanced noise reduction performance
  • Supports AGNSS. UART communication baudrate: 4800~115200bps (9600bps by default). Onboard BAT holder, supports ML1220 rechargeable cell, for preserving ephemeris information and hot starts
  • 4x LEDs for indicating the module operating status. Can provide with online development resources and manual (examples for Raspberry / Jetson / STM32)
  • 32,99 € AUF AMAZON
raspberry pi gnss raspberry pi hat hdd raspberry pi hdd hat raspberry pi battery hat raspberry pi 5g hat