main logo

Raspberry Pi Gnss

Die 10 besten Produkte von Oktober 2025
Letzte Aktualisierung: 10. Oktober 2025
Waveshare
Waveshare
Waveshare L76K GNSS Module for Raspberry Pi Pico, GPS/BeiDou (BDS) / GLONASS/QZSS Support, Supports A-GNSS Function
star

98

MAXIMALE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#1 GEWINNER

  • Pico-GPS-L76K, a GNSS module designed for Raspberry Pi Pico, supports GPS, BeiDou (BDS), GLONASS and QZSS systems, allows multi-system combined or single-system independent positioning. Supports AGNSS function, and offers advantages such as fast positioning, high accuracy, and low power consumption. Combined with the Raspberry Pi Pico / Pico 2, it's easy to use global navigating function
  • Standard Raspberry Pi Pico header, supports Raspberry Pi Pico series boards. Supports Multi-GNSS systems: GPS, BeiDou (BDS), GLONASS and QZSS
  • Built-in Low-Noise Amplifier (LNA) for improved reception sensitivity. Built-in SAW Filter for enhanced noise reduction performance. Supports AGNSS. UART communication baudrate: 4800~115200bps (9600bps by default)
  • Onboard BAT holder, supports ML1220 rechargeable cell, for preserving ephemeris information and hot starts. 4x LEDs for indicating the module operating status
  • Can provide with online development resources and manual (Raspberry Pi Pico C/C++ and MicroPython examples)
  • 22,99 € AUF AMAZON
Coolwell
Coolwell
Coolwell Cat-1/GSM/GPRS/GNSS HAT for Raspberry Pi Raspberry Pi 5 4B+ 4B 3B+ 3B 2B+ Zero W WH Jetson Nano Based On A7670E Module GNSS Positioning Support LTE Cat-1 / 2G
star

98

MAXIMALE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#2

  • For Raspberry Pi 5 Cat-1/GSM/GPRS/GNSS HAT, standard Raspberry Pi 40PIN GPIO extension header, fits Raspberry Pi series boards
  • For Arduino Cat-1/GSM/GPRS/GNSS HAT, breakout common used control pins of the A7670E module, make it easy to connect with hosts boards like for Arduino/STM32
  • For Jetson Nano Cat-1/GSM/GPRS/GNSS HAT, supports protocols including TCP/IP, HTTP(s), MQTT(s), FTP(s), and SSL; Supports GPS, BeiDou, GLONASS positioning
  • Supports dial-up, telephone call, SMS; supports LBS base station positioning, it is able to get the approximate position info via mobile network
  • Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)
  • 41,27 € AUF AMAZON
Waveshare
Waveshare
Waveshare LC76G Multi-GNSS Module Compatible with Raspberry PI, Supports GPS, BDS, GLONASS, Galileo, QZSS,Provides Multi-Platform Resources and Tutorials for Secondary Development and Integration
star

95

TOP QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#3

  • Supports Multi-GNSS systems: GPS, BeiDou (BDS), GLONASS, Galileo, and QZSS.Supports UART and I2C communication.
  • Compatible with multiple platforms.Compatible with Raspberry Pi/Raspberry Pi Pico/Jetson Nano/ESP32/Arduino,provide demos and user manuals, easier to develop and integrate, and better expansibility.
  • For more product parameters, please refer to the picture introduction or contact store customer service through the Amazon.
  • 24,99 € AUF AMAZON
Geekstory
Geekstory
Geekstory G72 G-Mouse USB GPS Dongle Glonass Beidou GNSS Empfänger Modul für Raspberry Pi Linux Windows, Better Than VK-172 GPS
Kostenloser Versand
star

92

TOP QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#4

  • G72 gps usb verwenden die neueren Chip (M8130-KT Chip), besser als vk-172 gps.This usb gps arbeitet mit Windows, Android, Raspberry pi, Linux und Google Earth, nicht für IOS-System.
  • Das Gerät ist standardmäßig auf GPS+Beidou, GPS+Glonass muss Anweisungen senden, um zu ändern.
  • Sie müssen Treiber installieren, bevor Sie es auf Fenster, aber Plug and Play für Raspberry Pi und Linux. Wenn Sie einige Treiber Links und mit Videos für G72 gps usb, Bitte kontaktieren Sie uns.
  • 1 X USB GPS-Empfänger-Modul, die Produktabmessungen: 60X24X9mm. Update-Frequenz: 1~10Hz, Baudrate: 4800, 9600, 19200, 38400, 57600, 115200bps
  • Der Link zur Produktdokumentation kann nicht angezeigt werden. Wenn Sie die technische Dokumentation benötigen, klicken Sie bitte auf "Geekstory" (Sie finden "Sold by Geekstory" unter der Schaltfläche "Buy Now"), klicken Sie auf der neuen Seite auf "Ask a question", um uns eine E-Mail zu senden.
  • 18,49 € AUF AMAZON
Waveshare
Waveshare
Waveshare 4G/3G/2G/GSM/GPRS/GNSS Hat for Raspberry Pi 4 Jetson Nano Based on SIM7600E-H Supports LTE CAT4 for Downlink Data Transfer
Kostenloser Versand
star

86

SICHERE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#5

  • The SIM7600E-H 4G HAT is a 4G/3G/2G communication and GNSS positioning module, which supports LTE CAT4 up to 150Mbps for downlink data transfer. it is pretty low power consumption.
  • You can connect this 4G module with computer to surf the Internet, or attach it onto Raspberry Pi to enable functions like 4G high speed connection, wireless communication, making telephone call, sending SMS, global positioning, etc.
  • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano. Supports SIM application toolkit: SAT Class 3, GSM 11.14 Release 99, USAT.
  • Baudrate: 300bps ~ 4Mbps (default: 115200bps). Autobauding baudrate: 9600bps ~ 115200bps. Control via AT commands (3GPP TS 27.007, 27.005, and V.25TER command set).
  • Supports dial-up, telephone call, SMS , mail, TCP, UDP, DTMF, HTTP, FTP, etc. Supports GPS, BeiDou, Glonass, LBS base station positioning.
  • 85,99 € AUF AMAZON
Waveshare
Waveshare
Waveshare SIM868 GSM/GPRS/GNSS HAT, Compatible with Raspberry Pi, for Easily Realizing Functions Like Making Calls, Sending Text Messages, Wireless Internet Access, etc
Kostenloser Versand
star

80

GUTE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#6

  • Specially design for Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards; Supports SIM application toolkit: GSM 11.14 Release 99
  • Supports SMS, phone call, GPRS, DTMF, HTTP, FTP, MMS, email, etc; Supports GPS, COMPASS, Glonass, LBS base station positioning, omni-positioning
  • supports data transferring; Baudrate auto detection (1200bps ~115200bps); Control via AT commands (3GPP TS 27.007, 27.005, and SIMCOM enhanced AT Commands)
  • Onboard USB to UART converter for UART debugging; 6x LEDs for indicating the module working status; SIM card slot for 1.8V/3V SIM card
  • RTC with backup batt holder; Comes with development resources and manual (examples for Raspberry Pi/STM32)
  • 39,99 € AUF AMAZON
LUCKFOX
LUCKFOX
LUCKFOX 4G HAT for Raspberry Pi, Based on Waveshare SIM7600E-H, Enabling LTE Cat-4 4G/3G/2G Communication & GNSS Positioning, Compatible with Raspberry Pi Series Boards/Jetson Nano
star

80

GUTE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#7

  • Equipped with standard Pi 40PIN GPIO expansion head, and compatible with Raspberry Pi series boards/Jetson Nano. Support dialing, telephone calling, SMS/TCP/UDP/DTMF/HTTP/FTP, etc
  • Support GPS/BeiDou/Glonass/GALILEO/QZSS/LBS base station positioning. The onboard USB interface is used to test AT commands, obtain GPS positioning data, etc. On board 2102 USB to UART converter for serial debugging. Disconnect the UART control pin for connecting STM32 and other motherboards
  • SIM card slot, supporting 1.8V/3V SIM card. TF card slot, used to store files, messages and other data. Car audio jack and audio decoder for making calls. 2 LED indicators, easy to monitor operation status
  • On board voltage converter, the working voltage can be configured as 3.3V or 5V through jumpers. Baudrate: 300bps ~ 4Mbps (default: 115200bps). Autobauding baudrate: 9600bps ~ 115200bps. Control via AT command (3GPP TS 27.007, 27.005 and V.25TER command set)
  • Support SIM application kit: SAT Class 3, GSM 11.14 Release 99, USAT. Provide online development resources and manuals (examples for Raspberry Pi/Jetson Nano/STM32). Please ask 24-hour customer service for relevant manual
  • 75,99 € AUF AMAZON
Waveshare
Waveshare
Waveshare SIM7600E-H 4G-Module, Used for Windows/Linux Dial-up Internet Access, Cloud Platform Communication, GNSS Locating, Compatible with Raspberry Pi/Jetson Nano/ESP32/STM32 Programming Platforms
Kostenloser Versand
star

77

GUTE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#8

  • Typical application: Used for Medical and health, smart payment, public network intercom, environmental monitoring, energy monitoring, fleet management, smart industry, smart agriculture. With 3× IPEX antenna connector, comes with 2× yellow pin header and FPC antenna. Applicable regions: Europe/Southeast Asia/West Asia/Africa/China/Korea
  • Compatible with 2G/3G/4G network with global support. Supports dial-up, telephone calls, SMS/TCP/UDP/MQTT/DTMF/HTTP/FTP, etc. Supports GPS/BeiDou/Glonass/GALILEO/QZSS/LBS base station positioning. Onboard USB and UART interface, for dial-up Internet access, cloud platform communication, GNSS positioning, etc
  • Castellated holes with immersion gold design, small size, easy to integrate into the device by soldering directly or inserting via the pin header. Adapting USB/UART/SIM card/GPIO control pins, easy to develop and debug, better expansibility. Built-in voltage translator, compatible with 3.3V/5V MCU motherboards such as STM32/ESP32
  • Supports multiple power supply methods: USB port, VIN pin, and VBAT pin (for 3.7V lithium batt). Supports 5~26V wide voltage power supply and 3A high current output, to prevent the module from dropping and restarting due to the large instantaneous power consumption, more stable and reliable in industrial use
  • Onboard Nano SIM card slot, supports 1.8V and 3V SIM cards, near the edge of the board design, for easy accessing SIM card. Comes with online development resources and manual (examples for Raspberry Pi/Jetson Nano/STM32)
  • 67,99 € AUF AMAZON
Waveshare
Waveshare
Waveshare L76K Multi-GNSS Module Compatible with Raspberry Pi Supports GPS/BDS/QZSS for Secondary Development and Integration
star

73

GUTE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#9
Waveshare
Waveshare
Waveshare MAX-M8Q GNSS HAT for Raspberry Pi with Multi-Constellation Receiver Support and Support Augment Systems Like SBAS QZSS IMES and D-GPS
star

67

GUTE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#10

  • Multi-constellation receiver support, concurrent reception of up to 3 types of GNSS satellite systems from GPS, Beidou, Galileo, and GLONASS, and still retains low power consumption. Augment systems support, including SBAS, QZSS, IMES, D-GPS, improving the positioning performance of service location
  • A-GNSS (Assisted GNSS) support, reducing the first positioning time when powered up, improving the acquisition sensitivity. Features -167dBm navigating sensitivity and outstanding ability for anti-spoofing & anti-jamming, supports geo-fencing
  • Supports U-Center, an easy way to config the module. Standard Raspberry Pi 40PIN GPIO extension header. Supports Raspberry Pi series boards, Jetson Nano. Onboard USB TO UART converter CP2102 for serial debugging
  • Breakouts the module's UART and I2C interface, for connecting with host boards like Arduino/STM32. Baudrate range: 4800~921600bps (9600bps by default). Supports DDC (I2C compliant) interface: up to 400KHz (max)
  • Onboard batt holder, supports ML1220 rechargeable cell, for preserving ephemeris information and hot starts. 4x LEDs for indicating the module operating status. Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)
  • 55,99 € AUF AMAZON
raspberry pi gnss hat kühlkörper raspberry pi raspberry pi kühlkörper lcd raspberry pi raspberry pi lcd