main logo

Raspberry Pi Ai Shield

Die 10 besten Produkte von Dezember 2025
Letzte Aktualisierung: 9. Dezember 2025
GeeekPi
GeeekPi
GeeekPi N21 Dual NVMe SSD Shield Bottom for Raspberry Pi 5, Supports Hailo-8 AI Accelerator, N21 Dual 2280 NVMe Base, Support Two 2230/2242/2260/2280 NVMe SSDs
20% Rabatt Kostenloser Versand
star

99

MAXIMALE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#1 GEWINNER

  • Compatibility: GeeekPi N21 Dual NVMe SSD Shield Bottom only compatible with Raspberry Pi 5
  • Support Dual M.2 NVMe SSD with multiple length: Support M.2 M-Key NVMe SSD 2230/2242/2260/2280 length installation. Comes with SSD copper pillar for 2230/2242/2260 SSD installation
  • Raspberry Pi 5 AI Hat Extension: Supports Hailo AI acceleration module built around the Hailo-8L chip from Raspberry Pi AI Kit
  • Support NVMe Boot: Supports NVMe boot with eeprom 2024/05/17 and later version
  • How to Power: 5Vdc +/-5% power via GPIO pin header and FFC, converted to 3.3V max 3A to power the SSD; Recommend to use GeeekPi PD 27W power adapter (ASIN: B0CQ1Q18HX)
  • 27,98 € AUF AMAZON
Geekworm
Geekworm
Geekworm X1005 Dual NVMe SSD Shield Bottom for Raspberry Pi 5, Supports Hailo-8 AI Accelerator
Kostenloser Versand
star

96

BESTE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#2

  • 【Compatibility】Raspberry Pi 5 Dual NVMe Hat only compatible with Raspberry Pi 5, Model: X1005
  • 【Support Dual M2 NVMe SSD with multiple length】Support M.2 KEY-M NVMe SSD 2230/2242/2260/2280 length installation. Comes with SSD copper pillar for 2230/2242/2260 SSD installation
  • 【 Raspberry Pi 5 AI Hat Extension】 Supports Hailo AI acceleration module built around the Hailo-8L chip from Raspberry Pi AI Kit
  • 【 Support NVMe Boot】 Supports NVMe boot with eeprom 2024/05/17 and later version
  • 【How to Power】 5Vdc +/-5% power via GPIO pin header and FFC, converted to 3.3V max 3A to power the SSD; Recommend to use Geekworm PD 27W power adapter (ASIN:B0CP8SRXSC) or (ASIN:B0CZCZF2QV)
  • 【Packing List】1 x X1005 PCIe Peripheral Board, 2x 37mm PCIe FFC Cable(One as backup), 1x Screws Pack
  • 【Matching Case (NOT include)】Refer to P580-V2 Case (ASIN: B0D99HVX3C). NOT compatible with P580!
  • 38,00 € AUF AMAZON
KEYESTUDIO
KEYESTUDIO
KEYESTUDIO ReSpeaker 2-Mic Pi HAT V1.0 für Raspberry Pi Zero und Zero W, Raspberry Pi B+, Raspberry Pi 2B und 3B/4B
29% Rabatt Kostenloser Versand
star

96

BESTE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#3

  • Dies ist Keyestudio ReSpeaker 2-Mic Pi HAT V1.0 Shield für AI und Sprachanwendungen. Es ist ein Low-Power-Stereo-Codec basierend auf dem WM8960.
  • Darüber hinaus kann ein 3,5-mm-Klinkenstecker oder XH2,54-2PIN Lautsprecherausgang für Audio-Ausgang verwendet werden.
  • Es gibt zwei Mikrofone auf dem Schild für die Klangsammlung, drei APA102 RGB LEDs, eine Benutzer-Taste und zwei Grove Anschlüsse zur Erweiterung der Anwendung.
  • Technische Unterstützung: Verbindungsdiagramm, Beispielcode, Verwendung von Methode und Ressourcen finden Sie auf unserer Wiki-Seite. Technischer Support erhalten Sie per E-Mail oder Nachricht.
  • Mit diesem Schild können Sie ein leistungsfähigeres und flexibleres Sprachprodukt bauen, das Amazon Amazona Voice-Dienste, Google Assistant und mehr integriert.
  • 9,99 € AUF AMAZON
GeeekPi
GeeekPi
GeeekPi Starter Kit für Raspberry Pi 5 8GB, mit N04 M.2 NVMe SSD PCIe Peripheriekarte, Metallgehäuse, offiziellem aktiven Kühler, 64GB SD Karte und Kartenleser, HDMI Kabel, 27W USB C 5.1V 5A Netzteil
24% Rabatt Kostenloser Versand
star

92

TOP QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#4

  • 【Pi 5 Single-board Computer Included 】Includes Pi 5 8GB with ARM Cortex-A76 CPU clocked at 2.4GHz, and VideoCore VII GPU clocked at 800MHz. These increase the performance up to 2 to 3 times faster than Raspberry Pi 4 Model B!
  • 【N04 M.2 NVMe to PCIe Adapter Included】N04 M.2 NVMe to PCIe Adapter is designed for the latest Raspberry Pi 5. It supports the installation of NVMe (M-key) drives in M.2 format sizes 2230, 2242, 2260 and 2280. Extra custom CNC SSD mount screw, no soldering required.
  • 【High Quality Pi5 Case】This Pi 5 Case is made of High-Quality Metal material, can provide a strong and durable protection for your Raspberry Pi 5 Board, and it can accurately access most ports of Raspberry Pi board, including usb-c power jack, micro HDMI ports, usb ports, Ethernet jack, sd card slot, power button, and GPIO Slot.
  • 【Pi 5 Active Cooler Included】Official Pi 5 Active Cooler combines an aluminium heatsink with a PWM fan to keep your Raspberry Pi 5 maintain optimal operating temperatures, ensuring reliable performance for various applications.
  • 【High Quality Power Supply】5.1V 5A 27W USB C power Supply is designed for Raspberry Pi 5 board. The power adapter is equipped with Power Delivery technology, allowing for fast and efficient charging of compatible devices. It also offers a variety of output voltage options, including 5.1V at 5A, 9.0V at 3.0A, 12.0V at 2.25A, and 15.0V at 1.8A, providing flexibility for different device requirements.
  • 159,99 € AUF AMAZON
ZDE
ZDE
ZDE ZP511 PCIe to M.2 Key M NVMe HAT SSD Shield Hard Drive Adapter Board Pip PCIe Peripheral Board for Raspberry Pi 5 Support M.2 SSD 2230 2242 2280
Kostenloser Versand
star

84

SICHERE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#5

  • The ZP511 HAT is an M.2 Key-M NVMe SSD Expansion Board for the Raspberry Pi 5 that uses the new PCIe interface of the Raspberry Pi 5 to utilize the M.2 NVMe SSDs for ultra-fast booting and fast data transmission. Supports Gen2 and Gen3 modes.
  • ZP511 M.2 NVMe to PCIe Adapter Board supports the installation of M.2 KEY-M NVMe SSD in 2230/2242/2280 length (SSD is not included). Comes with extra screws kit for 2230/2242 SSD installation, no soldering required.
  • This PCIe to M.2 NVMe adapter supports the installation of official Raspberry Pi 5 Active Cooler (Not Included) and there is a reserved airflow vent for the cooling fan, providing excellent heatsink for Raspberry Pi 5 and SSD.
  • How to Power: Power the ZP511 shield directly from the PCIe FPC ribbon cable. Also, with 40pin header, the board can automatically supply power from GPIO, avoiding the problem of insufficient power supply for ultra-large capacity of SSDs.
  • Great Accessories for Raspberry Pi 5: ZP511 PCIe Peripheral Board is compatible with Raspberry Pi 5 2GB/4GB/8GB/16GB SBC (NOT include Raspberry Pi 5).
  • This ZP511 top HAT is suitable for use with aluminum case. Only for aluminum enclosure, please refer to ZC501 (ASIN: B0DSZYLMSS); for Active Cooler, please refer to ZP536(ASIN: B0DSZYHNF5); for Aluminum Case with Active Cooler, please refer to ZP537(ASIN: B0DSZVN5YX).
  • 11,99 € AUF AMAZON
ZDE
ZDE
ZDE ZP517A PCIe to M.2 HAT Key-M NVMe SSD Shield Solid State Drive Adapter Board Pip PCIe Peripheral Board for Raspberry Pi 5 Support M.2 NVMe SSD 2230 2242 2260 2280
Kostenloser Versand
star

82

SICHERE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#6

  • The ZP517A HAT is an M.2 Key-M NVMe SSD Expansion Board for the Raspberry Pi 5 that uses the new PCIe interface of the Raspberry Pi 5 to utilize the M.2 NVMe SSDs for ultra-fast booting and fast data transmission. Supports Gen2 and Gen3 modes.
  • ZP517A M.2 NVMe to PCIe Adapter Board supports the installation of M.2 Key-M NVMe SSD in 2230/2242/2260/2280 length (Solid State Drive is not included). Comes with extra screws kit for 2230/2242/2260 SSD installation, no soldering required.
  • Great Accessories for Raspberry Pi 5: ZP517A PCIe Peripheral Board is compatible with Raspberry Pi 5 2GB/4GB/8GB/16GB SBC (NOT include Raspberry Pi 5).
  • This PCIe to M.2 NVMe adapter supports the installation of official Pi 5 active cooler (Not Included). Cooling fan provides better heatsink for Raspberry Pi 5 and SSD.
  • How to Power: Power the ZP517A shield directly from the PCIe FFC ribbon cable.
  • This ZP517A top HAT is suitable for use with aluminum case. For an aluminum enclosure, please refer to ZC501(ASIN: B0DSZYLMSS) and ZC502(ASIN: B0F2995JCY); for Active Cooler, please refer to ZP536(ASIN: B0DSZYHNF5); for Aluminum Case with Active Cooler, please refer to ZP537(ASIN: B0DSZVN5YX) and ZP540(ASIN: B0F299H1Y8).
  • 11,99 € AUF AMAZON
ZDE
ZDE
ZDE ZP519 PCIe to Dual M.2 HAT Key M NVMe SSD Shield PCIe Peripheral Board Solid State Drive Adapter Board for Raspberry Pi 5 Support M.2 NVMe SSD 2230 2242 2260 2280
Kostenloser Versand
star

81

GUTE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#7

  • Dual M.2 NVMe SSDs Supported: ZP519 PCIe to Dual M.2 HAT Key-M NVMe SSD expansion board supports the installation of two M.2 Key-M NVMe SSDs in 2230/2242/2260/2280 length, high-speed reading/writing; supports boot from NVMe SSD.
  • Compatibility: This PCIe to Dual M.2 HAT NVMe kit is only compatible with Raspberry Pi 5 2GB/4GB/8GB/16GB SBC.
  • How to Power: Power the adapter directly from the PCIe FPC ribbon cable. Also, with 40pin GPIO header, the board can automatically supply power from GPIO, avoiding the problem of insufficient power supply for ultra-large capacity of SSDs.
  • Cooling Solution: The ZP519 shield supports the installation of official Pi 5 Active Cooler (Not Included) and there is a reserved airflow vent for the cooling fan, providing excellent heatsink for Raspberry Pi 5 and SSD.
  • Practical Accessories: Comes with 2pcs M2 studs for 2230/2242/2260/2280 SSD installation, no soldering required.
  • 27,99 € AUF AMAZON
GeeekPi
GeeekPi
GeeekPi DeskPi Lite Pi5 Gehäuse mit Power-Taste, PCIe auf M.2 HAT, Aktivkühler und Dual-HDMI in voller Größe für Raspberry Pi 5, unterstützt M.2 NVMe M-Key 2230/2242/2260/2280 SSDs
15% Rabatt Kostenloser Versand
star

74

GUTE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#8

  • Kompatibilität --- Das DeskPi Lite Pi5 Gehäuse ist für Raspberry Pi 5 konzipiert.
  • Erweiterbarkeit: Das DeskPi Lite Pi5-Gehäuse unterstützt PCIex1-Erweiterung, wodurch die Verbindung von M.2 NVMe SSDs in verschiedenen Größen (2230, 2242, 2260, 2280) möglich ist. Es ist auch kompatibel mit dem Hailo-8L-Modul aus dem offiziellen Pi AI Kit, jedoch nicht als vollständiger HAT.
  • Fortschrittliches Kühlsystem --- Ausgestattet mit einem Armor Lite V5 Active Cooler bietet das Gehäuse eine effiziente Kühlung, um eine optimale Leistung zu erhalten und die Lebensdauer Ihres Pi-Boards zu verlängern.
  • Praktische Konnektivität: Das Gehäuse enthält eine PCB-Tochterplatine, die einen MicroHDMI-zu-Standard-HDMI-Adapter bietet, der eine einfache Verbindung zu Displays ermöglicht. Es leitet auch den USB-C-Anschluss auf die Rückseite für ein besseres Kabelmanagement um.
  • GPIO-Zugriff --- Das Gehäuse verfügt über eine GPIO-Erweiterungsplatine und eine GPIO-Staubabdeckung, wodurch es einfach ist, auf die GPIO-Pins zuzugreifen und sie zu schützen.
  • Power Management --- Das Gehäuse wird mit einem Netzschalterknopf für eine einfache Ein- und Ausschaltsteuerung und einem Reset-Druckknopf für die Pi 5-Platine geliefert.
  • 33,98 € AUF AMAZON
ZDE
ZDE
ZDE ZP518 PCIe to Dual M.2 HAT Key M NVMe SSD PCIe Peripheral Board Solid State Drive Adapter Board for Raspberry Pi 5 Support M.2 NVMe SSD 2230 2242
Kostenloser Versand
star

72

GUTE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#9

  • Dual M.2 NVMe SSDs Supported: ZP518 PCIe to Dual M.2 HAT Key-M NVMe SSD expansion board supports the installation of two M.2 Key-M NVMe SSDs in 2230/2242 length, high-speed reading/writing; supports boot from NVMe SSD.
  • Compatibility: This PCIe to Dual M.2 HAT NVMe kit is only compatible with Raspberry Pi 5 2GB/4GB/8GB/16GB SBC.
  • How to Power: Power the PCIe to M.2 NVMe adapter directly from the PCIe FPC ribbon cable. Also, with 40pin GPIO header, the board can automatically supply power from GPIO, avoiding the problem of insufficient power supply for ultra-large capacity of SSDs.
  • Cooling Solution: The ZP518 shield supports the installation of official Pi 5 Active Cooler (Not Included) and there is a reserved airflow vent for the cooling fan, providing excellent heatsink for Raspberry Pi 5 and SSD.
  • Practical Accessories: Comes with 2pcs M2 studs for 2230/2242 SSD installation, no soldering required.
  • This ZP518 top HAT is suitable for use with aluminum case. For aluminum enclosure, please refer to ZC501 (ASIN: B0DSZYLMSS); for Active Cooler, please refer to ZP536 (ASIN: B0DSZYHNF5); for Aluminum Case with Active Cooler, please refer to ZP537 (ASIN: B0DSZVN5YX).
  • 25,99 € AUF AMAZON
ZDE
ZDE
ZDE ZP583 PoE+ HAT PCIe to M.2 Key M NVMe SSD Adapter Board Power Over Ethernet with Aluminum Heatsink Onboard Cooling Fan for Raspberry Pi 5 Support 802.3af/at Network Standard M.2 NVMe SSD 2230 2242
Kostenloser Versand
star

70

GUTE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#10

  • The PoE+ HAT expansion board is an 802.3af/at-compliant Power Over Ethernet (PoE+) accessory for the Raspberry Pi 5. Providing both network connection and power supply for your Raspberry Pi in only one Ethernet cable.
  • Support 802.3af/at Network Standard. Suitable for use with a PoE router, switch or splitter that supports the IEEE 802.3af/at networking standard.
  • Use the PCIe interface of the Raspberry Pi 5 to utilize the M.2 NVMe SSDs for ultra-fast booting and fast data transmission. Support M.2 NVMe SSD in 2230/2242 length.
  • Equipped with onboard high-speed active cooler, aluminum heatsink and silicone thermal pads for better heat dissipation effect and more stable operation performance. If you don’t need to use the cooling fan, you can also disassemble it.
  • Standard Raspberry Pi 40PIN GPIO header, compatible with Raspberry Pi 5 16GB/8GB/4GB/2GB computer (NOT include Raspberry Pi 5). Pin headers on the top for easy access to other Raspberry Pi expansion boards or modules.
  • Suitable for use with aluminum case kit. For aluminum enclosure, please refer to model ZC501(ASIN: B0DSZYLMSS).
  • 33,99 € AUF AMAZON
raspberry pi shield ai raspberry pi raspberry pi ai raspberry pi ai module raspberry pi ai accelerator raspberry pi ai hat raspberry pi ai kamera raspberry pi ai kit raspberry pi 5 ai raspberry pi 4 ai