Micro Swiss K1
Die 10 besten Produkte von Juli 2025
Letzte Aktualisierung:
13. Juli 2025
Micro-Swiss
Micro Swiss FlowTech™ Hotend for Creality K1 / K1 Max
Kostenloser Versand
99
MAXIMALE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#1 GEWINNER
▼ Mehr anzeigen
▲ Weniger anzeigen
The FlowTech Hotend is a new generation hotend line from Micro Swiss. Its unique design eliminates common hotend issues such as leaking nozzle seal and complex nozzle swaps.
Leak-Proof Nozzle: Tired of messy nozzle leaks that ruin your prints and waste filament? FlowTech Hotend combines nozzle and thermal break into one permanently sealed assembly that ensures a leak-proof hotend.
Cold Nozzle Change: Swapping out nozzles used to be a time-consuming and potentially hazardous task. With a FlowTech Hotend, nozzle changes are effortless, and there's no need for hot tightening, and you can do it with just one hand.
High-Flow Characteristics: Ceramic cylindrical heater and 28.6mm melt zone provides excellent volumetric flow rate.
All-Metal Design: Built to last! FlowTech hotend features an all-metal design that can handle most modern 3D printing filaments. The entire hotend is machined and assembled in-house, with quality control performed at multiple stages during the manufacturing process. At the end, each hotend undergoes a full thermal cycling test before it is packaged.
79,90 € AUF AMAZON
Micro-Swiss
Micro Swiss CM2™ Resistant Nozzle for FlowTech™ Hotend - 0.4mm
Kostenloser Versand
98
MAXIMALE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#2
▼ Mehr anzeigen
▲ Weniger anzeigen
Micro Swiss CM2 Nozzle is an ideal nozzle for all applications. Core of the nozzle is made of high-temperature Copper Chromium Zirconium and plated with an Electroless Nickel Plating.
This special alloy retains its strength at much higher temperatures compared to a regular copper alloy. The tip of the nozzle is made of M2 Hardened High Speed Steel and coated with a special nonstick nano coating.
30,99 € AUF AMAZON
Micro-Swiss
Micro Swiss Brass Plated Wear Resistant Nozzle for FlowTech™ Hotend - 0.4mm
Kostenloser Versand
93
TOP QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#3
▼ Mehr anzeigen
▲ Weniger anzeigen
The FlowTech nozzle is designed to be a leak proof and offers an effortless and quick nozzle replacement process.
FlowTech design seamlessly integrates the thermal tube with the nozzle, effectively resolving the most prevalent challenges encountered with conventional hotends: nozzle leaks and nozzle replacement inconvenience.
19,99 € AUF AMAZON
Micro-Swiss
Micro Swiss Brass Plated Wear Resistant Nozzle for Creality K1, K1 Max, CR-M4-0.4mm
Kostenloser Versand
90
HOHE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#4
▼ Mehr anzeigen
▲ Weniger anzeigen
The nozzle is made from a 360 brass base material and plated with TwinClad XT coating. TwinClad XT is a nickel composite coating designed for very low friction. It offers one of the lowest coefficient of friction, better than nickel with PTFE co-deposit. The TwinClad XT coating is also very hard and abrasion resistant. If you are working with abrasive Carbon Fiber, Stainless Steel, wood filled or any other metal filled filaments, this will greatly improve the life of your nozzle.
18,99 € AUF AMAZON
Micro-Swiss
Micro Swiss FlowTech™ Hardware Kit for Creality K1 / K1 Max
Kostenloser Versand
83
SICHERE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#5
▼ Mehr anzeigen
▲ Weniger anzeigen
This is a spare hardware kit for FlowTech hotend
9,12 € AUF AMAZON
Micro-Swiss
Micro Swiss Brass Plated Wear Resistant Nozzle for Creality K1, K1 Max, CR-M4-0.6mm
Kostenloser Versand
82
SICHERE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#6
▼ Mehr anzeigen
▲ Weniger anzeigen
The nozzle is made from a 360 brass base material and plated with TwinClad XT coating. TwinClad XT is a nickel composite coating designed for very low friction. It offers one of the lowest coefficient of friction, better than nickel with PTFE co-deposit. The TwinClad XT coating is also very hard and abrasion resistant. If you are working with abrasive Carbon Fiber, Stainless Steel, wood filled or any other metal filled filaments, this will greatly improve the life of your nozzle.
18,99 € AUF AMAZON
Micro-Swiss
Micro Swiss Brass Plated Wear Resistant Nozzle for Creality K1, K1 Max, CR-M4-0.8mm
Kostenloser Versand
80
GUTE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#7
▼ Mehr anzeigen
▲ Weniger anzeigen
The nozzle is made from a 360 brass base material and plated with TwinClad XT coating. TwinClad XT is a nickel composite coating designed for very low friction. It offers one of the lowest coefficient of friction, better than nickel with PTFE co-deposit. The TwinClad XT coating is also very hard and abrasion resistant. If you are working with abrasive Carbon Fiber, Stainless Steel, wood filled or any other metal filled filaments, this will greatly improve the life of your nozzle.
18,99 € AUF AMAZON
Micro-Swiss
Micro Swiss Direct Drive Extruder mit Hotend für Creality Ender 5
Kostenloser Versand
78
GUTE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#8
▼ Mehr anzeigen
▲ Weniger anzeigen
Keine Änderung erforderlich, einfaches Plug-and-Play
Keine bedruckten Klammern oder Sandwiches
Eigenschaften: Dual-Drive-Zug, gehärteter Werkzeugstahl, CNC-präzisionsgeschnittene Zahnräder. Verstellbarer Filament-Griff. Einfaches Laden von Filamenten. Kurzer, stark beengter Filament. Druckt flexible Filamente mit hoher Geschwindigkeit und Genauigkeit. Ausgezeichnete Extrusionskontrolle. Leichtes Aluminiumgehäuse
Verpackungsgewicht: 60 g
119,00 € AUF AMAZON
Micro-Swiss
MicroSwiss M2598-06 Duese Messing plattiert 0,6 mm
73
GUTE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#9
▼ Mehr anzeigen
▲ Weniger anzeigen
Passend für: Ultimaker 3 / Ultimaker 5s
Öffnungsgröße: 0,6 mm
Beschichtet mit TwinClad XT-Beschichtung
Hergestellt in den USA von Micro Swiss
20,06 € AUF AMAZON
Creality
Creality Offiziell K1 Max keramischer Heizblock-Kit, Kupferlegierung-gehärteter Stahl-Wärmebruch-Unterstützung 300°C hohe Temperatur und 600mm/s Hochgeschwindigkeitsdruck kompatibel mit K1 Max/K1
67
GUTE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#10
▼ Mehr anzeigen
▲ Weniger anzeigen
100% Creality Original-Das Keramik-Heizblock-Kit ist maßgeschneidert für die nahtlose Integration mit Creality K1 Max- und K13D-Druckern und gewährleistet eine perfekte Passform und außergewöhnliche Leistung
Edelstahl mit extrem dünner Wanddünnung hat eine ausgezeichnete Wärmedämmleistung, während reines Kupfer eine ausgezeichnete Wärmeleitfähigkeit hat, die die Wärmeleitung beschleunigen kann, so dass die Gesamtleistung besser ist
Hochgeschwindigkeitsdruckunterstützung: Das Drucken mit halsbrecherischen Geschwindigkeiten bis zu 600mm/s ist jetzt ein Kinderspiel, dank des erweiterten Schmelzabschnitts, der eine 32% Verlängerung der Länge (28,5mm) für einwandfreien Hochgeschwindigkeitsdruck bietet
Das All-Metal-Design bietet verbesserte Leistung und hohe Temperaturbeständigkeit bis 300°C, wodurch es mit mehr Filamenten wie PLA, ABS, PETG, TPU, PP, PC, Nylon und mehr kompatibel ist
Kundendienst. Es gibt mehr als 20-Ingenieure für Kundendienst und bieten 24/7-Kundendienst mit 1-jähriger begrenzter und lebenslanger technischer Unterstützung. Bitte kontaktieren Sie uns über "Fragen stellen" direkt, um professionelle Unterstützung zu erhalten
31,89 € AUF AMAZON
micro swiss
micro swiss flowtech
micro protector k1