main logo

Micro Swiss Flowtech

Die 10 besten Produkte von Oktober 2025
Letzte Aktualisierung: 12. Oktober 2025
Micro-Swiss
Micro-Swiss
Micro Swiss FlowTech™ Hotend for Creality K1 / K1 Max
Kostenloser Versand
star

99

MAXIMALE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#1 GEWINNER

  • The FlowTech Hotend is a new generation hotend line from Micro Swiss. Its unique design eliminates common hotend issues such as leaking nozzle seal and complex nozzle swaps.
  • Leak-Proof Nozzle: Tired of messy nozzle leaks that ruin your prints and waste filament? FlowTech Hotend combines nozzle and thermal break into one permanently sealed assembly that ensures a leak-proof hotend.
  • Cold Nozzle Change: Swapping out nozzles used to be a time-consuming and potentially hazardous task. With a FlowTech Hotend, nozzle changes are effortless, and there's no need for hot tightening, and you can do it with just one hand.
  • High-Flow Characteristics: Ceramic cylindrical heater and 28.6mm melt zone provides excellent volumetric flow rate.
  • All-Metal Design: Built to last! FlowTech hotend features an all-metal design that can handle most modern 3D printing filaments. The entire hotend is machined and assembled in-house, with quality control performed at multiple stages during the manufacturing process. At the end, each hotend undergoes a full thermal cycling test before it is packaged.
  • 69,95 € AUF AMAZON
Micro-Swiss
Micro-Swiss
Micro Swiss CM2™ Resistant Nozzle for FlowTech™ Hotend - 0.4mm
26% Rabatt Kostenloser Versand
star

96

BESTE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#2

  • Micro Swiss CM2 Nozzle is an ideal nozzle for all applications. Core of the nozzle is made of high-temperature Copper Chromium Zirconium and plated with an Electroless Nickel Plating.
  • This special alloy retains its strength at much higher temperatures compared to a regular copper alloy. The tip of the nozzle is made of M2 Hardened High Speed Steel and coated with a special nonstick nano coating.
  • 19,99 € AUF AMAZON
Micro-Swiss
Micro-Swiss
Micro Swiss Silicone Sock for FlowTech™ Hotend - 3pcs
Kostenloser Versand
star

92

TOP QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#3

  • A pack of 3 high temperature non-stick silicone socks for FlowTech hotend. Socks are made of a heat-resistant, non-stick silicone material, it will keep your heater block clean and will help retain the heat.
  • 11,95 € AUF AMAZON
Micro-Swiss
Micro-Swiss
Micro Swiss FlowTech™ High Flow CHT Nozzle - 0.4mm
Kostenloser Versand
star

90

HOHE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#4

  • Microswiss and Bondtech have partnered to bring the High Flow nozzle to the FlowTech ecosystem. This new nozzle incorporates proprietary CHT technology, specifically designed to enhance the filament flow rate.
  • Plated with Non-stick Composite Additive TwinClad XT Plating
  • The FlowTech nozzle, equipped with Bondtech CHT technology, can achieve a maximum volumetric flow rate of up to 50 mm³/sec.
  • More uniform layer deposition is achieved by splitting the filament flow into multiple chambers as it passes through the melt zone. This reduces gaps and weak points between layers.
  • The FlowTech CHT nozzle is compatible with all FlowTech hotend models
  • 24,95 € AUF AMAZON
Micro-Swiss
Micro-Swiss
Micro Swiss CM2™ Resistant Nozzle for FlowTech™ Hotend - 0.6mm
26% Rabatt Kostenloser Versand
star

87

SICHERE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#5

  • Micro Swiss CM2 Nozzle is an ideal nozzle for all applications. Core of the nozzle is made of high-temperature Copper Chromium Zirconium and plated with an Electroless Nickel Plating.
  • This special alloy retains its strength at much higher temperatures compared to a regular copper alloy. The tip of the nozzle is made of M2 Hardened High Speed Steel and coated with a special nonstick nano coating.
  • 19,99 € AUF AMAZON
Micro-Swiss
Micro-Swiss
Micro Swiss FlowTech™ Hotend for Creality Ender 3 V3 KE
Kostenloser Versand
star

81

GUTE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#6

  • The FlowTech Hotend is a new generation hotend line from Micro Swiss. Its unique design eliminates common hotend issues such as leaking nozzle seal and complex nozzle swaps.
  • Leak-Proof Nozzle: Tired of messy nozzle leaks that ruin your prints and waste filament? FlowTech Hotend combines nozzle and thermal break into one permanently sealed assembly that ensures a leak-proof hotend.
  • Cold Nozzle Change: Swapping out nozzles used to be a time-consuming and potentially hazardous task. With a FlowTech Hotend, nozzle changes are effortless, and there's no need for hot tightening, and you can do it with just one hand.
  • High-Flow Characteristics: Ceramic cylindrical heater and 28.6mm melt zone provides excellent volumetric flow rate.
  • All-Metal Design: Built to last! FlowTech hotend features an all-metal design that can handle most modern 3D printing filaments. The entire hotend is machined and assembled in-house, with quality control performed at multiple stages during the manufacturing process. At the end, each hotend undergoes a full thermal cycling test before it is packaged.
  • 69,95 € AUF AMAZON
Micro-Swiss
Micro-Swiss
Micro Swiss Brass Plated Wear Resistant Nozzle for FlowTech™ Hotend - 0.4mm
Kostenloser Versand
star

79

GUTE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#7

  • The FlowTech nozzle is designed to be a leak proof and offers an effortless and quick nozzle replacement process.
  • FlowTech design seamlessly integrates the thermal tube with the nozzle, effectively resolving the most prevalent challenges encountered with conventional hotends: nozzle leaks and nozzle replacement inconvenience.
  • 19,99 € AUF AMAZON
Micro-Swiss
Micro-Swiss
Micro Swiss CM2™ Resistant Nozzle for FlowTech™ Hotend - 0.8mm
Kostenloser Versand
star

76

GUTE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#8

  • Micro Swiss CM2 Nozzle is an ideal nozzle for all applications. Core of the nozzle is made of high-temperature Copper Chromium Zirconium and plated with an Electroless Nickel Plating.
  • This special alloy retains its strength at much higher temperatures compared to a regular copper alloy. The tip of the nozzle is made of M2 Hardened High Speed Steel and coated with a special nonstick nano coating.
  • 19,99 € AUF AMAZON
Micro-Swiss
Micro-Swiss
Microswiss FlowTech Hotend for Creality K2/K2 Plus
Kostenloser Versand
star

71

GUTE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#9

  • The FlowTech Hotend incorporates Bondtech CHT High Flow Nozzles, achieving a volumetric flow rate of up to 50 mm3/sec. This allows for ultra-fast printing without compromising quality. The nozzles design splits filament flow into multiple chambers, enhancing layer adhesion and reducing gaps between layers.
  • Featuring an integrated nozzle and thermal break, the FlowTech Hotend offers a leak-proof assembly. This design eliminates common issues like filament leakage and simplifies maintenance by allowing cold nozzle changes without the need for hot tightening.
  • Built entirely from metal, the FlowTech Hotend can withstand temperatures up to 350 degrees Celsius. This durability supports a wide range of modern filaments, including those requiring higher extrusion temperatures. Each unit undergoes meticulous in-house machining, assembly, and thermal cycling tests to ensure consistent performance and longevity.
  • Specifically tuned for the Creality K2/K2 Plus, the FlowTech Hotend offers plug-and-play installation. The included NTC thermistor is pre-calibrated, eliminating the need for firmware adjustments and ensuring immediate compatibility.
  • Manufactured in the USA by Micro Swiss, each FlowTech Hotend is subject to rigorous quality control measures. Multiple stages of inspection and a full thermal cycling test guarantee a product that meets high standards of reliability and performance.
  • 89,91 € AUF AMAZON
Micro-Swiss
Micro-Swiss
Micro-Swiss FlowTech Hotend für Elegoo Neptune 4 Plus / 4 Max - Auslaufsichere Düse - Kaltdüsenwechsel - Hoher Durchfluss - Ganzmetall-Design - Made in USA
Kostenloser Versand
star

65

GUTE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#10

  • Auslaufsichere Düse: Haben Sie genug von unordentlichen Düsenlecks, die Ihre Drucke und Abfallfilament ruinieren? FlowTech Hotend kombiniert Düse und thermische Trennung in einer dauerhaft versiegelten Baugruppe, die ein auslaufsicheres Hotend gewährleistet.
  • Kaltdüsenwechsel: Das Austauschen von Düsen war früher eine zeitaufwändige und potenziell gefährliche Aufgabe. Mit einem FlowTech Hotend sind Düsenwechsel mühelos, und es besteht keine Notwendigkeit für Heißanziehen, und Sie können es mit nur einer Hand tun.
  • High-Flow Characteristics: Ceramic cylindrical heater and 28.6mm melt zone provides excellent volumetrical flow rate.
  • Ganzmetall-Design: Gebaut für die Ewigkeit. FlowTech Hotend verfügt über ein Ganzmetalldesign, das die meisten modernen 3D-Druckfilamente verarbeiten kann. Das gesamte Hotend wird im Haus bearbeitet und montiert, wobei die Qualitätskontrolle in mehreren Phasen während des Herstellungsprozesses durchgeführt wird. Am Ende wird jedes Hotend einem vollständigen thermischen Zyklentest unterzogen, bevor es verpackt wird.
  • 【300 °C Max Temperatur】 Dieses Hotend wird bei einer Temperatur von 300 °C mit einem richtig abgestimmten NTC-Thermistor für jeden spezifischen Drucker bewertet. Diese spezielle Edition ist perfekt auf Elegoo Neptune 4 Plus und 4 Max abgestimmt, sodass keine Firmware-Änderungen erforderlich sind.
  • 74,90 € AUF AMAZON
micro swiss micro swiss düse micro swiss hotend micro swiss mk10 micro swiss cm2 micro swiss k1 micro swiss mk8 micro swiss ng micro swiss nozzle micro swiss extruder