main logo

High Flow Nozzle 0.4

Die 10 besten Produkte von Dezember 2025
Letzte Aktualisierung: 10. Dezember 2025
Bondtech
Bondtech
Bondtech CHT® Coated Brass Nozzle 0,4 mm -1 pcs  
star

98

MAXIMALE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#1 GEWINNER

  • These are nozzles for High Flow applications
  • Bondtech CHT nozzles split the filament into 3 thinner strands allowing to melt the material from within. In doing so, the material melts faster and higher flow rates can be used.
  • A Nickel coating is applied to our Coated Brass nozzles to provide protection against corrosion, erosion, and abrasion. Nickel coated nozzles have more corrosion resistance and lower coefficient of friction, which allows slicker feeding of material and delays plastic adhesion to the nozzle's surface.
  • 10
  • 27,98 € AUF AMAZON
Micro-Swiss
Micro-Swiss
FlowTech CHT High Flow - CM2 Nozzle - 0,40 mm    
star

96

BESTE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#2

  • Microswiss and Bondtech have partnered to bring the High Flow, Hardened Tip CM2 nozzle to the FlowTech ecosystem. This new nozzle incorporates proprietary CHT technology, specifically designed to enhance the filament flow rate.
  • Core of the nozzle is made of high-temperature Copper Chromium Zirconium and plated with an Electroless Nickel Plating. This special alloy retains its strength at much higher temperatures compared to a regular copper alloy.
  • The tip of the nozzle is made of M2 Hardened High Speed Steel and coated with a special WS2 nonstick nano coating.
  • The FlowTech nozzle, equipped with Bondtech CHT technology, can achieve a maximum volumetric flow rate of up to 50 mm³/sec
  • More uniform layer deposition is achieved by splitting the filament flow into multiple chambers as it passes through the melt zone. This reduces gaps and weak points between layers
  • 39,98 € AUF AMAZON
E3D
E3D
E3D RapidChange Revo™ Brass 1.75mm 0.4mm Nozzle  
17% Rabatt
star

93

TOP QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#3

  • Swap your 3D printer’s nozzles in less than 60 seconds without tools or hot tightening, just use your fingers! If you can unscrew a tube of toothpaste, you can use a Revo Nozzle. Just screw one in to any Revo cold side and you’re ready to 3D print.
  • Experiment freely: With nozzle swapping this easy, you’re free to experiment with nozzle sizes you might not have used before. Set your 3D printer up for ultra-fine or ultra-thick extrusion widths in no time at all. Print large objects in less time, or tiny objects with high resolution.
  • Frustration-free: Each Revo Nozzle is a preassembled nozzle and HeatBreak in one unit, so there’s no hazardous hot tightening and no chance of incorrect assembly. Say goodbye to frustrating HotEnd leaks and enjoy reliable 3D printing!
  • Rapid identification: Identify nozzle sizes at a glance thanks to a colour-coded silicone sock. Plus, each Revo Nozzle has its size engraved into it with easy-to-read numbers, so there are no confusing identification markers to learn!
  • An expanding range: We’re ready to make RapidChange Nozzles in any size. At launch, we’re introducing brass nozzles in 0.25mm, 0.4mm, 0.6mm and 0.8mm, with many more compatible nozzles to follow later. Wear-resistant and high flow variants are already on our roadmap and will follow over time.
  • 24,01 € AUF AMAZON
Micro-Swiss
Micro-Swiss
Micro Swiss FlowTech™ High Flow CHT Nozzle - 0.4mm
star

91

HOHE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#4

  • Microswiss and Bondtech have partnered to bring the High Flow nozzle to the FlowTech ecosystem. This new nozzle incorporates proprietary CHT technology, specifically designed to enhance the filament flow rate.
  • Plated with Non-stick Composite Additive TwinClad XT Plating
  • The FlowTech nozzle, equipped with Bondtech CHT technology, can achieve a maximum volumetric flow rate of up to 50 mm³/sec.
  • More uniform layer deposition is achieved by splitting the filament flow into multiple chambers as it passes through the melt zone. This reduces gaps and weak points between layers.
  • The FlowTech CHT nozzle is compatible with all FlowTech hotend models
  • 23,95 € AUF AMAZON
JUUPINE
JUUPINE
JUUPINE 2 Pack upgraded print heads For Bambu lab A1/A1 mini High temperature resistant 0.4mm hardened steel nozzle Extruder High flow hotend kit with 2 silicone socks
star

88

HOHE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#5

  • Precise adaptation for all models: specially customized for Bambu lab A1/A1 Mini, original interface design, quick installation design, plug and play. 1 kit with 2 hotends to Meet the needs of spare and replaceable.
  • Military-grade durable system: chrome-plated brass heating block + hardened steel nozzle, dual hard-core configuration, resistant to 320℃ high temperature + 300% wear resistance improvement/corrosion resistance life exceeds 2000 hours
  • Second-cut full consumables mode: 1.75mm consumables are all-inclusive: PLA/ABS/TPU/wood/carbon fiber, etc., support high-speed printing, and increase discharge efficiency by 20%
  • Intelligent safety double insurance: high temperature and dryness reduction design, smooth inner wall of nozzle throat, uniform discharge, reduced blocking mechanism and low noise printing, continuous printing stability increased by 50%
  • Ultimate Precision Experience: The hot end is equipped with two high-precision 0.4mm high-flow, fast-printing nozzles, producing delicate prints with clear textures. This combination of precision and efficiency meets your needs for more precise and detailed printing.
  • 18,95 € AUF AMAZON
E3D
E3D
E3D Prusa ObXidian MK4/XL Nozzle - 1 pcs - 0.4mm
20% Rabatt
star

82

SICHERE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#6

  • >These high-quality 3D printing nozzles are designed specifically for use with Prusas latest extruder – Nextruder. Compatible with Prusas MK4 and XL 3D printers, they feature an all-metal filament guide which means that Nextruders filament path is entirely metal.
  • With a wear resistance that is orders of magnitude higher than any other E3D nozzle, ObXidian is really hard, making it the perfect nozzle for printing abrasive/filled polymers with. This is achieved by pairing a tool steel insert with our new E3DLC coating. This specially formulated coating also embeds non-stick properties into the Nozzle itself.
  • Meaning considerably less plastic build-up around the Nozzle.
  • E3D
  • 45,59 € AUF AMAZON
E3D
E3D
E3D RapidChange Revo™ ObXidian Nozzle 0,4 mm    
star

80

GUTE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#7

  • Tauschen Sie die Düsen Ihres 3D-Druckers in weniger als 60 Sekunden ohne Werkzeug oder heißes Anziehen aus, verwenden Sie einfach Ihre Finger! Wenn Sie eine Tube Zahnpasta abschrauben können, können Sie eine Revo-Düse verwenden. Schrauben Sie einfach eine in eine beliebige Revo kalte Seite und Sie sind bereit für den 3D-Druck.
  • Experimentieren Sie frei: Mit dem so einfachen Düsentausch können Sie mit Düsengrößen experimentieren, die Sie möglicherweise noch nie zuvor verwendet haben. Stellen Sie Ihren 3D-Drucker im Handumdrehen auf ultrafeine oder ultradicke Extrusionsbreiten ein. Drucken Sie große Objekte in kürzerer Zeit oder kleine Objekte mit hoher Auflösung.
  • Frustrationsfrei: Jede Revo-Düse ist eine vormontierte Düse und HeatBreak in einer Einheit, so dass es kein gefährliches Heißanziehen und keine Chance auf eine falsche Montage gibt. Verabschieden Sie sich von frustrierenden HotEnd-Lecks und genießen Sie zuverlässigen 3D-Druck!
  • Schnelle Identifikation: Identifizieren Sie Düsengrößen auf einen Blick dank einer farbcodierten Silikonsocke. Außerdem hat jede Revo-Düse ihre Größe mit leicht lesbaren Zahlen eingraviert, so dass es keine verwirrenden Identifikationsmarker zu lernen gibt!
  • Ein wachsendes Sortiment: Wir sind bereit, RapidChange-Düsen in jeder Größe herzustellen. Bei der Markteinführung stellen wir Messingdüsen in 0,25 mm, 0,4 mm, 0,6 mm und 0,8 mm vor, wobei viele weitere kompatible Düsen später folgen werden. Verschleißfeste und High-Flow-Varianten stehen bereits auf unserer Roadmap und werden im Laufe der Zeit folgen.
  • 65,99 € AUF AMAZON
HOCENWAY
HOCENWAY
Upgrade Bimetall Düse 0.4mm High Flow Hochtemperatur überzogener Kupfer gehärteter Stahl Bimetall Düse kompatibel mit AnkerMake M5 M5C 3D Drucker (0.4)
star

76

GUTE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#8
Bondtech
Bondtech
Bondtech CHT Vol Coated Brass Nozzle - 0,4 mm -1 pcs
star

73

GUTE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#9

  • These are nozzles for High Flow applications, They are manufactured by Bondtech in-house.
  • Compatible with 2.85mm filament
  • Bondtech CHT nozzles split the filament into 3 thinner strands allowing to melt the material from within. In doing so, the material melts faster and higher flow rates can be used.
  • 10
  • 33,98 € AUF AMAZON
E3D
E3D
E3D                                              
star

66

GUTE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#10

  • E3D & Bambu Lab ObXidian High Flow HotEnds are an official collaboration between E3D and Bambu Labs, bringing you one of the most compact, lightweight and, more importantly, performant HotEnds to date.
  • Using our patent pending internal nozzle geometry first developed for Revo High Flow, we've managed to increase the volumetric flow rate of the hotend by 60%! That means you can expect more reliable and consistent extrusion at the same speeds or bump up the volumetric flow rate limit in the slicer to utilise the motion systems' capabilities fully.
  • E3D has applied their E3DLC coating to the nozzle and heater block, adding even more abrasive resistance for all your fibre-filled fun and a non-stick protective layer to prevent plastic build-up on the Nozzle.
  • Compatibility: The E3D High Flow HotEnd is compatible with the X1, X1 Carbon, X1E, P1S, and P1P
  • 81,99 € AUF AMAZON
volcano nozzle 0.4 high flow volcano nozzle 0.4 high flow cht high flow nozzle e3d prusa nozzle high flow obxidian - 0.4 mm volcano nozzle high flow 0,6 revo high flow nozzle high flow nozzle p1s 0.4 nozzle high flow nozzle v6 nozzle 0.4