main logo

High Flow Nozzle

Die 10 besten Produkte von Dezember 2025
Letzte Aktualisierung: 10. Dezember 2025
Bondtech
Bondtech
Bondtech CHT® Coated Brass Nozzle 0,4 mm -1 pcs  
star

98

MAXIMALE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#1 GEWINNER

  • These are nozzles for High Flow applications
  • Bondtech CHT nozzles split the filament into 3 thinner strands allowing to melt the material from within. In doing so, the material melts faster and higher flow rates can be used.
  • A Nickel coating is applied to our Coated Brass nozzles to provide protection against corrosion, erosion, and abrasion. Nickel coated nozzles have more corrosion resistance and lower coefficient of friction, which allows slicker feeding of material and delays plastic adhesion to the nozzle's surface.
  • 10
  • 27,98 € AUF AMAZON
Micro-Swiss
Micro-Swiss
FlowTech CHT High Flow - CM2 Nozzle - 0,40 mm    
star

96

BESTE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#2

  • Microswiss and Bondtech have partnered to bring the High Flow, Hardened Tip CM2 nozzle to the FlowTech ecosystem. This new nozzle incorporates proprietary CHT technology, specifically designed to enhance the filament flow rate.
  • Core of the nozzle is made of high-temperature Copper Chromium Zirconium and plated with an Electroless Nickel Plating. This special alloy retains its strength at much higher temperatures compared to a regular copper alloy.
  • The tip of the nozzle is made of M2 Hardened High Speed Steel and coated with a special WS2 nonstick nano coating.
  • The FlowTech nozzle, equipped with Bondtech CHT technology, can achieve a maximum volumetric flow rate of up to 50 mm³/sec
  • More uniform layer deposition is achieved by splitting the filament flow into multiple chambers as it passes through the melt zone. This reduces gaps and weak points between layers
  • 39,98 € AUF AMAZON
Micro-Swiss
Micro-Swiss
FlowTech CHT High Flow - CM2 Nozzle - 0,60 mm    
star

93

TOP QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#3

  • Microswiss and Bondtech have partnered to bring the High Flow, Hardened Tip CM2 nozzle to the FlowTech ecosystem. This new nozzle incorporates proprietary CHT technology, specifically designed to enhance the filament flow rate.
  • Core of the nozzle is made of high-temperature Copper Chromium Zirconium and plated with an Electroless Nickel Plating. This special alloy retains its strength at much higher temperatures compared to a regular copper alloy.
  • The tip of the nozzle is made of M2 Hardened High Speed Steel and coated with a special WS2 nonstick nano coating.
  • The FlowTech nozzle, equipped with Bondtech CHT technology, can achieve a maximum volumetric flow rate of up to 50 mm³/sec
  • More uniform layer deposition is achieved by splitting the filament flow into multiple chambers as it passes through the melt zone. This reduces gaps and weak points between layers
  • 35,99 € AUF AMAZON
Micro-Swiss
Micro-Swiss
Micro Swiss FlowTech™ High Flow CHT Nozzle - 0.4mm
star

92

TOP QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#4

  • Microswiss and Bondtech have partnered to bring the High Flow nozzle to the FlowTech ecosystem. This new nozzle incorporates proprietary CHT technology, specifically designed to enhance the filament flow rate.
  • Plated with Non-stick Composite Additive TwinClad XT Plating
  • The FlowTech nozzle, equipped with Bondtech CHT technology, can achieve a maximum volumetric flow rate of up to 50 mm³/sec.
  • More uniform layer deposition is achieved by splitting the filament flow into multiple chambers as it passes through the melt zone. This reduces gaps and weak points between layers.
  • The FlowTech CHT nozzle is compatible with all FlowTech hotend models
  • 23,95 € AUF AMAZON
HOCENWAY
HOCENWAY
Upgrade Bimetall Düse 0.6mm High Flow Hochtemperatur überzogener Kupfer gehärteter Stahl Bimetall Düse kompatibel mit AnkerMake M5 M5C 3D Drucker (0.6)
star

84

SICHERE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#5

  • Bimetallisches Material-Kupferlegierung und gehärteter Stahl, glatte Innenwand, glatte Verdrängung, gleichmäßige Fütterung. Kupferlegierung hat eine hohe Hitzebeständigkeit bis 500°C, während gehärtete Stahlspitze bis 450°C hat, kann sie mit den meisten Filamenten für den Druck verwendet werden.
  • Bimetallic material with high hardness for high speed printing. Nozzle tip is made of hardened steel, Mohs hardness 7.8, long service life. The body is made of copper alloy, its thermal conductivity is as high as 330W/m.k and ensures that the nozzle heats more evenly. The volume is increased and supports high speed printing of 600mm/s speed.
  • Die Vernickelung auf der Düsenoberfläche reduziert die Haftung von Filamenten an der Düse erheblich, was zu einer glatteren Zuführung führt. Glattere Innenwand, keine Verstopfung, mit der Ra<0.4 Rauheit verbessert die Innenwand die Fließfähigkeit des Filaments und bringt super glatte Extrusion
  • Nahtlose Verbindung, keine Filamentleckage. Eine flache Oberfläche und intensive Fugen lösen effektiv das Leckproblem. NUR kompatibel mit M5 und M5C 3D Drucker, bitte wissen Sie vor der Bestellung.
  • Paket: 1-teilige Bimetalldüse 0.6
  • 9,99 € AUF AMAZON
Bondtech
Bondtech
Bondtech CHT Vol Coated Brass Nozzle - 0,4 mm -1 pcs
star

81

GUTE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#6

  • These are nozzles for High Flow applications, They are manufactured by Bondtech in-house.
  • Compatible with 2.85mm filament
  • Bondtech CHT nozzles split the filament into 3 thinner strands allowing to melt the material from within. In doing so, the material melts faster and higher flow rates can be used.
  • 10
  • 33,98 € AUF AMAZON
Micro-Swiss
Micro-Swiss
FlowTech CHT High Flow - CM2 Nozzle - 0,80 mm    
star

80

GUTE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#7

  • Microswiss and Bondtech have partnered to bring the High Flow, Hardened Tip CM2 nozzle to the FlowTech ecosystem. This new nozzle incorporates proprietary CHT technology, specifically designed to enhance the filament flow rate.
  • Core of the nozzle is made of high-temperature Copper Chromium Zirconium and plated with an Electroless Nickel Plating. This special alloy retains its strength at much higher temperatures compared to a regular copper alloy.
  • The tip of the nozzle is made of M2 Hardened High Speed Steel and coated with a special WS2 nonstick nano coating.
  • The FlowTech nozzle, equipped with Bondtech CHT technology, can achieve a maximum volumetric flow rate of up to 50 mm³/sec
  • More uniform layer deposition is achieved by splitting the filament flow into multiple chambers as it passes through the melt zone. This reduces gaps and weak points between layers
  • 39,98 € AUF AMAZON
Creality
Creality
Creality E3D Obxidian™ High Flow Düsensätze 0.4mm, schnelle Demontage und Montage, High-Flow-Druck, Multi-Runner-Design, Material-Upgrade, geeignet für K1（2024）//K1 Max（2024）/K1C/K1 SE/Ender-3 V3/PLUS
15% Rabatt
star

77

GUTE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#8

  • Integriertes Ganzmetalldesign, schnelle Demontage und Montage Die --- Düse und der Hals verfügen über ein integriertes Ganzmetalldesign, das schnell zerlegt und leicht ausgetauscht werden kann.
  • Hohe Durchflussrate, unterstützt Hochgeschwindigkeitsdruck --- Der Düsenhohlraum wird vergrößert, die maximale Durchflussrate kann 42 mm³/s erreichen, und der Hochgeschwindigkeitsdruck von 600 mm/s wird unterstützt.
  • Multi-Runner-Design --- Innovative Design, der Druckkopf nimmt ein Multi-Runner-Design an, das mehr Verbrauchsmaterialien durchlässt, wodurch die Durchflussrate erheblich erhöht wird.
  • Material-Upgrade, geeignet für den Druck einer Vielzahl von Verbrauchsmaterialien --- Der Schlauch besteht aus einer Titanlegierung, um die Wärmeleitung zu reduzieren, und die Düse besteht aus einer Kupferlegierung und gehärtetem Stahl.（PLA/ABS/PETG/TPU/PP/PC/PLA-CF/PA-CF/PET-CF)
  • *Der Düsenkopf besteht aus gehärtetem Stahl (SKD11), mit einer Härte von 7,8 auf der Mohs-Skala und einer 6-fachen Lebensdauer * Die Wärmeleitfähigkeit der Kupferlegierung beträgt 330 W / m·K und die Erwärmung ist gleichmäßig.
  • 41,95 € AUF AMAZON
JUUPINE
JUUPINE
JUUPINE 2 Pack upgraded print heads For Bambu lab A1/A1 mini High temperature resistant 0.4mm hardened steel nozzle Extruder High flow hotend kit with 2 silicone socks
star

73

GUTE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#9

  • Precise adaptation for all models: specially customized for Bambu lab A1/A1 Mini, original interface design, quick installation design, plug and play. 1 kit with 2 hotends to Meet the needs of spare and replaceable.
  • Military-grade durable system: chrome-plated brass heating block + hardened steel nozzle, dual hard-core configuration, resistant to 320℃ high temperature + 300% wear resistance improvement/corrosion resistance life exceeds 2000 hours
  • Second-cut full consumables mode: 1.75mm consumables are all-inclusive: PLA/ABS/TPU/wood/carbon fiber, etc., support high-speed printing, and increase discharge efficiency by 20%
  • Intelligent safety double insurance: high temperature and dryness reduction design, smooth inner wall of nozzle throat, uniform discharge, reduced blocking mechanism and low noise printing, continuous printing stability increased by 50%
  • Ultimate Precision Experience: The hot end is equipped with two high-precision 0.4mm high-flow, fast-printing nozzles, producing delicate prints with clear textures. This combination of precision and efficiency meets your needs for more precise and detailed printing.
  • 18,95 € AUF AMAZON
E3D
E3D
E3D RapidChange Revo™ Brass 1.75mm 0.4mm Nozzle  
17% Rabatt
star

65

GUTE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#10

  • Swap your 3D printer’s nozzles in less than 60 seconds without tools or hot tightening, just use your fingers! If you can unscrew a tube of toothpaste, you can use a Revo Nozzle. Just screw one in to any Revo cold side and you’re ready to 3D print.
  • Experiment freely: With nozzle swapping this easy, you’re free to experiment with nozzle sizes you might not have used before. Set your 3D printer up for ultra-fine or ultra-thick extrusion widths in no time at all. Print large objects in less time, or tiny objects with high resolution.
  • Frustration-free: Each Revo Nozzle is a preassembled nozzle and HeatBreak in one unit, so there’s no hazardous hot tightening and no chance of incorrect assembly. Say goodbye to frustrating HotEnd leaks and enjoy reliable 3D printing!
  • Rapid identification: Identify nozzle sizes at a glance thanks to a colour-coded silicone sock. Plus, each Revo Nozzle has its size engraved into it with easy-to-read numbers, so there are no confusing identification markers to learn!
  • An expanding range: We’re ready to make RapidChange Nozzles in any size. At launch, we’re introducing brass nozzles in 0.25mm, 0.4mm, 0.6mm and 0.8mm, with many more compatible nozzles to follow later. Wear-resistant and high flow variants are already on our roadmap and will follow over time.
  • 24,01 € AUF AMAZON
high flow nozzle p1s prusa high flow nozzle revo high flow nozzle high flow nozzle mk8 mk8 high flow nozzle high flow nozzle adapter high flow nozzle v6 v6 high flow nozzle v6 nozzle high flow volcano nozzle high flow