main logo

Hardened Steel Nozzle High Flow

Die 10 besten Produkte von Dezember 2025
Letzte Aktualisierung: 11. Dezember 2025
JUUPINE
JUUPINE
JUUPINE 2 Pack upgraded print heads For Bambu lab A1/A1 mini High temperature resistant 0.4mm hardened steel nozzle Extruder High flow hotend kit with 2 silicone socks
star

98

MAXIMALE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#1 GEWINNER

  • Precise adaptation for all models: specially customized for Bambu lab A1/A1 Mini, original interface design, quick installation design, plug and play. 1 kit with 2 hotends to Meet the needs of spare and replaceable.
  • Military-grade durable system: chrome-plated brass heating block + hardened steel nozzle, dual hard-core configuration, resistant to 320℃ high temperature + 300% wear resistance improvement/corrosion resistance life exceeds 2000 hours
  • Second-cut full consumables mode: 1.75mm consumables are all-inclusive: PLA/ABS/TPU/wood/carbon fiber, etc., support high-speed printing, and increase discharge efficiency by 20%
  • Intelligent safety double insurance: high temperature and dryness reduction design, smooth inner wall of nozzle throat, uniform discharge, reduced blocking mechanism and low noise printing, continuous printing stability increased by 50%
  • Ultimate Precision Experience: The hot end is equipped with two high-precision 0.4mm high-flow, fast-printing nozzles, producing delicate prints with clear textures. This combination of precision and efficiency meets your needs for more precise and detailed printing.
  • 18,95 € AUF AMAZON
JUUPINE
JUUPINE
JUUPINE 2 Pack upgraded print heads For Bambu lab A1/A1 mini High temperature resistant 0.2mm&0.4mm hardened steel nozzle Extruder High flow hot end kit with 2 silicone socks
star

98

MAXIMALE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#2

  • Precise adaptation for all models: specially customized for Bambu lab A1/A1 Mini, original interface design, quick installation design, plug and play. 1 kit with 2 hot ends to meet diversified creative use.
  • Military-grade durable system: chrome-plated brass heating block + hardened steel nozzle, dual hard-core configuration, resistant to 320℃ high temperature + 300% wear resistance improvement/corrosion resistance life exceeds 2000 hours
  • Second-cut full consumables mode: 1.75mm consumables are all-inclusive: PLA/ABS/TPU/wood/carbon fiber, etc., support high-speed printing, and increase discharge efficiency by 20%
  • Intelligent safety double insurance: high temperature and dryness reduction design, smooth inner wall of nozzle throat, uniform discharge, reduced blocking mechanism and low noise printing, continuous printing stability increased by 50%
  • Extreme precision experience: The hot end comes with 0.2mm high-precision nozzle and 0.4mm high-flow fast printing nozzle, with delicate printing and clear texture. Fine/efficient mode can be switched at will to meet more precise and delicate printing needs.
  • 18,55 € AUF AMAZON
JUUPINE
JUUPINE
For Bambu H2S/H2D Hotend 0.4mm Hardened Steel Nozzle Replacement kit for Bambu Lab H2D/H2S/A1/A1 Mini,High-Speed Precision and Time-saving Extruder hotend Print head(2Pcs)
star

93

TOP QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#3

  • H2D Hotend: Standard flow Speed ​​H2D 0.4mm Hardened Hotend quick change hardened steel nozzle replacement kit for Bambu Lab H2D/A1/A1 Mini. This kit contains two hotends and 4 replaceable silicone sleeves.
  • 0.4mm Standard Size: This precision printing H2D hotend extruder uses a 0.4mm diameter hardened steel nozzle, which takes into account both printing speed and quality, making it an ideal choice for everyday applications. It is often used to print toys, mechanical parts and decorations. After many extensive tests, Bambu PLA-CF and Bambu PETG-CF use a standard 0.4mm diameter hardened steel nozzle, which can achieve higher print quality while reducing the risk of clogging during printing, effectively balancing printing speed and precision.
  • [Official Standard Flow Kit Comparable] This Bambu Lab H2D hot-end printer is comparable to the official standard hot-end kit. It boasts superior printing performance, ensuring precise high-speed positioning, reducing line defects, and enabling smooth printing of complex designs.
  • Quick-Change Hotend Design: The H2D hotend heating assembly is specially designed to easily separate the heating element and electronic components of the hot end. The hotend can be quickly and easily removed and installed by simply unlocking the latch. Before replacing, make sure the hot end has cooled down, and avoid touching the heating block (the lower part of the hot end) to avoid burns.
  • Ultra-Durable Material: This H2D hot end nozzle is made of hardened steel SKD11 material with a smooth inner wall to reduce clogging and improve printing quality. The hotend has a maximum printing temperature of up to 350°C and can print a variety of filaments, such as common filaments such as PLA/PETG/TPU/ABS.
  • 21,39 € AUF AMAZON
CUVZORA
CUVZORA
CUVZORA 2PK Hardened Steel Nozzle, All-in-one Extruder Throat und Hardened Steel Nozzle 0.4mm für Kobra 3 Max Quick Change High Flow Hot End Extruder Teile Kit für Anycubic 3 Max Combo
star

92

TOP QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#4

  • Perfekte Passform: Speziell entwickelt für den Anycubic Kobra 3 Max Combo FDM 3D Drucker, um optimale Ergebnisse zu gewährleisten und zuverlässige Leistung
  • Umfangreiche Ausstattung: Enthält zwei hochdurchflussfähige, gehärtete Stahl Metall Einspritzdüsen (0,4 mm), die einfach ausgetauscht werden können für sorgenfreies Drucken ohne Verstopfungsprobleme
  • Schneller Austausch: Das innovative einteilige Design aus Metall ermöglicht eine blitzschnelle Demontage und Installation in nur 18 Sekunden, was die Effizienz beim Austausch erheblich steigert
  • Hochgeschwindigkeits Druckwunder: Der optimierte Hotend Raum in Kombination mit der Hochdurchflussdüse erzielt eine maximale Extrusionsrate von bis zu 30 mm³/s und ermöglicht müheloses Drucken bei Geschwindigkeiten von bis zu 600 mm/s
  • Breite Kompatibilität: Geeignet für das Hotend des Anycubic 3 Max Combo und kompatibel mit einer Vielzahl gängiger Filamenttypen mit 1,75 mm Durchmesser, darunter PLA, PETG, TPU, ABS und Holzfilamente
  • 16,99 € AUF AMAZON
JUUPINE
JUUPINE
New Upgraded 0.6M Hotend Kit for Flashforge AD5X Nozzle, All Metal 3s Quick-Detachable Nozzle kit,HTR 550°C Hardened Steel Nozzle Wear-resistant,32mm³/s High Flow,600mm/s High-Speed AD5X Parts
star

85

SICHERE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#5

  • Upgraded 0.6MM Hotend Kit: Only supports AD5X models manufactured after May 31, 2025. Existing users must replace both the upgrade screws and the heating module. Officially clarified: The new printhead has physical differences from the old connector; forcing the installation may cause deformation of the hot end module.
  • Tool-free replacement in 3s: The innovative integrated neck heating module allows for quick removal and installation of the printhead, hotend, and heat sink, increasing replacement efficiency by 70% compared to traditional split designs, making maintenance easy even for novice users.
  • All-metal industrial-grade construction: The hot end module is made of aircraft-grade aluminum alloy, and the discharge nozzle is made of hardened steel, resistant to temperatures up to 550°C. Compatible with high-melting-point, wear-resistant filaments such as PETG, PC, nylon, and ABS. Tested to last 20 hours of continuous printing without deformation.
  • Intelligent color management: Integrated IFS multi-color feeding system supports simultaneous switching between four filament colors. Compatible with Orca-Flashforge software for automatic color calibration, achieving a 98% success rate for printing on TPU flexible materials. High-speed printing and farm-level scalability: 600mm/s print speed + 20,000mm/s² acceleration, industry-leading efficiency. Supports Orca-Flashforge group control software, enabling unattended printing for hundreds of devices.
  • Product Includes: 1 0.6mm nozzle + 2 silicone sleeves + 1 silicone nozzle wiper
  • 25,99 € AUF AMAZON
JUUPINE
JUUPINE
New Upgraded 0.4M Hotend Kit for Flashforge AD5X Nozzle, All Metal 3s Quick-Detachable Nozzle kit,HTR 550°C Hardened Steel Nozzle Wear-resistant,32mm³/s High Flow,600mm/s High-Speed AD5X Parts
star

80

GUTE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#6

  • upgrade 0.4MM Hotend Kit: Only supports AD5X models manufactured after May 31, 2025. Existing users must replace both the upgrade screws and the heating module. Officially clarified: The new printhead has physical differences from the old connector; forcing the installation may cause deformation of the hot end module.
  • Tool-free replacement in 3s: The innovative integrated neck heating module allows for quick removal and installation of the printhead, hot end, and heat sink, increasing replacement efficiency by 70% compared to traditional split designs, making maintenance easy even for novice users.
  • All-metal industrial-grade construction: The hot end module is made of aircraft-grade aluminum alloy, and the discharge nozzle is made of hardened steel, resistant to temperatures up to 550°C. Compatible with high-melting-point, wear-resistant filaments such as PETG, PC, nylon, and ABS. Tested to last 20 hours of continuous printing without deformation.
  • Intelligent color management: Integrated IFS multi-color feeding system supports simultaneous switching between four filament colors. Compatible with Orca-Flashforge software for automatic color calibration, achieving a 98% success rate for printing on TPU flexible materials. High-speed printing and farm-level scalability: 600mm/s print speed + 20,000mm/s² acceleration, industry-leading efficiency. Supports Orca-Flashforge group control software, enabling unattended printing for hundreds of devices.
  • 6. Product Includes: 1 0.4mm nozzle + 2 silicone sleeves + 1 silicone nozzle wiper
  • 26,35 € AUF AMAZON
WOHPNLE
WOHPNLE
0.8mm Integrated Nozzle, Quick Swap Steel Hardened Nozzle with High Temperature Stubborn, High Flow Nozzle for 3D Printer Accessory
star

78

GUTE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#7

  • ​​Precision Surface Finishing:​​ With mirror-polished inner bore surface and chamfered inlet geometry, this high flow nozzle reduces filament stubborn and retraction requirements by 90% compared to standard nozzles with machining marks and surface imperfections that increase friction and require longer retraction distances to prevent stringing and oozing during travel moves.
  • ​​Heatbreak Insulation Technology:​​ Incorporating integrated heatbreak design that isolates heating block temperatures from upper assembly components, this quick swap nozzle prevents heat creep and filament jamming in the cold end during extended printing sessions and high-temperature material processing that challenges thermal management in all-metal hotend systems.
  • ​​Quick-Swap Installation System:​​ Featuring integrated design with heatbreak component and standardized mounting interface, this quick swap nozzle enables tool- replacement in under two minutes without recalibration or complex alignment procedures that typically require technical expertise and precision adjustments in traditional nozzle replacement processes.
  • High-Flow Diameter Design:​​ This 0.8mm integrated nozzle features enlarged orifice diameter that increases material flow rate by approximately 300% compared to standard 0.4mm nozzles, enabling printing speeds and thicker layer heights for large-scale prototypes, functional parts, and draft types where print time reduction matters more than ultra-fine detail resolution.
  • Composite Material Compatibility:​​ Constructed from wear-stubborn hardened steel with polished inner bore surface roughness below 0.4 microns, this 0.8mm printer nozzle withstands abrasive composite filaments including carbon-fiber, glass-fiber, and metal-filled materials that rapidly degrade standard brass nozzles through abrasive wear that alters orifice geometry and compromises print quality over time.
  • 14,49 € AUF AMAZON
JUUPINE
JUUPINE
New Upgraded 0.25M &0.4MM Hotend Kit for Flashforge AD5X Nozzle, All Metal 3s Quick-Detachable Nozzle,HTR 550°C Hardened Steel Nozzle Wear-resistant,32mm³/s High Flow,600mm/s High-Speed AD5X Parts
star

78

GUTE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#8

  • Upgraded 0.25MM Hot End Kit: Only supports AD5X models manufactured after May 31, 2025. Existing users must replace both the upgrade screws and the heating module. Officially clarified: The new printhead has physical differences from the old connector; forcing the installation may cause deformation of the hot end module.
  • Tool-free replacement in 3s: The innovative integrated neck heating module allows for quick removal and installation of the printhead, hot end, and heat sink, increasing replacement efficiency by 70% compared to traditional split designs, making maintenance easy even for novice users.
  • All-metal industrial-grade construction: The hot end module is made of aircraft-grade aluminum alloy, and the discharge nozzle is made of hardened steel, resistant to temperatures up to 550°C. Compatible with high-melting-point, wear-resistant filaments such as PETG, PC, nylon, and ABS. Tested to last 20 hours of continuous printing without deformation.
  • Intelligent color management: Integrated IFS multi-color feeding system supports simultaneous switching between four filament colors. Compatible with Orca-Flashforge software for automatic color calibration, achieving a 98% success rate for printing on TPU flexible materials. High-speed printing and farm-level scalability: 600mm/s print speed + 20,000mm/s² acceleration, industry-leading efficiency. Supports Orca-Flashforge group control software, enabling unattended printing for hundreds of devices.
  • 6. Product Includes: 1 0.25mm + 0.4mm nozzle + 3 silicone sleeves + 2 silicone nozzle wipes
  • 44,55 € AUF AMAZON
JUUPINE
JUUPINE
(2PK) All-in-one Extruder Throat & Hardened Steel Nozzle (0.4mm) for Kobra 3 Max, Quick Change High Flow Hot End Extruder Parts Kit for Anycubic Kobra 3 Max Combo 3D Printer
star

74

GUTE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#9

  • Perfect fit: Tailor-made for Anycubic Kobra 3 Max Combo FDM 3D printer.
  • Rich configuration: Contains 2 high-flow hardened steel all-metal one-piece nozzles (0.4mm), which can be replaced and no longer worry about plugging.
  • Fast replacement: The innovative all-metal one-piece design enables 18-second quick disassembly and installation, greatly improving replacement efficiency.
  • High-speed printing artifact: The optimized and enlarged hot end cavity, combined with the high-flow nozzle, has a maximum extrusion flow rate of up to 30mm³/s, easily controlling 600mm/s high-speed printing. High temperature resistant design, stable and reliable performance.
  • Wide compatibility: Suitable for Anycubic Kobra 3 Max Combo hot end, compatible with a variety of mainstream filaments with 1.75mm specifications, including PLA, PETG, TPU, ABS and wood filaments.
  • 18,59 € AUF AMAZON
Nssnlur
Nssnlur
Nssnlur 2Pcs 0.6mm H2D H2S Hotend mit Hardened Steel Nozzle für Bambulab, Extruder Hotend Print Head Set für Bambu Lab H2D H2S/Combo 3D Drucker
star

69

GUTE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#10

  • Lieferumfang: 1 x 0,6mm H2D/H2S Hotend, kompatibel mit für Bambulab H2D, H2D Combo, H2S, H2S Combo, A1 und A1 Mini 3D-Druckern.
  • Kompromisslose Präzision: Das H2D Hotend erzielt makellose Details und liefert gestochen scharfe Kanten und glatte Oberflächen mit unübertroffener Konsistenz.
  • Hochwertige Ganzmetallkonstruktion: Präzisionsgefertigt aus gehärtetem SKD11-Stahl für verstopfungsfreie Leistung und erstklassige Druckergebnisse. Das H2D Hotend verarbeitet sowohl Standardmaterialien als auch abrasive Carbon-/Glasfaserfilamente problemlos.
  • Langlebige 0,6-mm-Düse aus gehärtetem Stahl: Ideal für den täglichen Gebrauch und bietet die optimale Balance zwischen Geschwindigkeit und Präzision. Das abriebfeste Design verhindert Verstopfungen bei verstärkten Filamenten (PLA-CF/PETG-CF) und erhält gleichzeitig die Druckqualität.
  • Werkzeugloser Schnellwechsel: Das innovative Design des H2D H2S ermöglicht einen sofortigen Düsenwechsel – die thermischen und elektronischen Komponenten lassen sich in Sekundenschnelle einfach abnehmen, was eine mühelose Wartung und das Drucken mit mehreren Materialien ermöglicht.
  • 35,99 € AUF AMAZON
high flow nozzle high flow nozzle p1s prusa high flow nozzle revo high flow nozzle hardened steel nozzle high flow nozzle v6 v6 high flow nozzle v6 nozzle high flow high flow nozzle adapter high flow nozzle mk8