Geekworm X1005
Die 10 besten Produkte von Oktober 2025
Letzte Aktualisierung:
10. Oktober 2025
Geekworm
Geekworm X1005 Dual NVMe SSD Shield Bottom for Raspberry Pi 5, Supports Hailo-8 AI Accelerator
Kostenloser Versand
99
MAXIMALE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#1 GEWINNER
▼ Mehr anzeigen
▲ Weniger anzeigen
【Compatibility】Raspberry Pi 5 Dual NVMe Hat only compatible with Raspberry Pi 5, Model: X1005
【Support Dual M2 NVMe SSD with multiple length】Support M.2 KEY-M NVMe SSD 2230/2242/2260/2280 length installation. Comes with SSD copper pillar for 2230/2242/2260 SSD installation
【 Raspberry Pi 5 AI Hat Extension】 Supports Hailo AI acceleration module built around the Hailo-8L chip from Raspberry Pi AI Kit
【 Support NVMe Boot】 Supports NVMe boot with eeprom 2024/05/17 and later version
【How to Power】 5Vdc +/-5% power via GPIO pin header and FFC, converted to 3.3V max 3A to power the SSD; Recommend to use Geekworm PD 27W power adapter (ASIN:B0CP8SRXSC) or (ASIN:B0CZCZF2QV)
【Packing List】1 x X1015 PCIe Peripheral Board, 2x 40mm PCIe FFC Cable(One as backup), 1x GPIO Header, 1x Screws Pack (Note: not include Raspberry Pi 5, SSD, TF card or power adapter.)
【Matching Case (NOT include)】Refer to P580-V2 Case (ASIN: B0D99HVX3C). NOT compatible with P580!
38,00 € AUF AMAZON
Geekworm
Geekworm P580-V2 Case | Support Raspberry Pi 5 & X1005 / X1002 PCIe to M2 NVMe SSD Base & Active Cooler
Kostenloser Versand
98
MAXIMALE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#2
▼ Mehr anzeigen
▲ Weniger anzeigen
【for use with】① for Raspberry Pi 5 with PCIe to Dual M.2 NVMe Shield Base X1005 (ASIN: B0D89MZTCY); ② for Raspberry Pi 5 with PCIe to M.2 NVMe Shield Base X1002 (ASIN: B0CQXPCNZK)
【Raspberry Pi 5 Active Cooler Supported (NOT included)】Supports Raspberry Pi 5 active cooler installation, together with beautifully crafted cooling holes to ensures efficient heat dissipation
【Easy Access to Pi 5】P580-V2 Raspberry Pi 5 Case can easy access to Raspberry Pi 5 usb-c power jack, micro HDMI ports, usb ports, Ethernet jack, sd card slot, power button,etc.
【Packing List】1 x P580-V2 metal case, 1x 4pcs Rubber Pads; 1x Screws Pack Accessories
【NOTE】NOT include Raspberry Pi 5 motherboard, X1002/X1005 PIP Shield, M.2 NVMe SSD, Raspberry Pi 5 Active Cooler, or power adapter!!!
12,00 € AUF AMAZON
Geekworm
Geekworm X1001 PCIe to M.2 NVMe Key-M SSD Shield for Raspberry Pi 5
Kostenloser Versand
95
TOP QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#3
▼ Mehr anzeigen
▲ Weniger anzeigen
【Compatibility】Only for Raspberry Pi 5 16GB / 8GB / 4GB (NOT included)
【Matching Case (NOT included)】P579 (ASIN: B0CRB3DT5M); Or P579 Case with Official Active Cooler (ASIN: B0CT4P893Q)
【M2 Key-M NVMe SSD Supported】Support M.2 KEY-M NVMe SSD 2230/2242/2260/2280 length installation.【IMPORTANT】DON'T use NVMe SSD with Phison controller, please refer to: https://wiki.geekworm.com/X1001#Important_Notes
【How to Power】Use 5Vdc +/-5%, 5A to power via Raspberry Pi 5, and Pi 5 will power X1001 via FFC PCIe ribbon. Recommend to use Geekworm PD 27W power adapter (ASIN: B0CP8SRXSC)
【Packing List】1 x X1001 Shield, 1x Accessories Pack
12,93 € AUF AMAZON
Geekworm
Geekworm X1004 Dual M.2 NVMe SSD Shield PCIe Peripheral Board for Raspberry Pi 5
Kostenloser Versand
89
HOHE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#4
▼ Mehr anzeigen
▲ Weniger anzeigen
【Compatibility】only for Raspberry Pi 5 16GB / 8GB / 4GB (NOT included)
【Support Dual M2 SSD】Compatible with M.2 KEY-M NVMe SSD 2280 (NOT included)
【How to Power】5Vdc +/-5%, 5A via Raspberry Pi 5. Recommend to use Geekworm PD 27W power adapter (ASIN: B0CP8SRXSC); or GaN PD 27W power supply (ASIN: B0CZCZF2QV)
【Support NVMe Boot】X1004 now supports NVMe boot with the latest eeprom (2024/05/17 version)
【Packing List】1 x X1004 PCIe to M2 NVMe Shield, 1x Accessories Pack
【Matching Case (NOT included)】Refer to P579-V2 Case (ASIN: B0CRB3DT5M), or P579-V2 Case with active cooler (ASIN: B0CT4P893Q)
【Note】Since X1004 is using ASMedia ASM1182e PCIe switch, it can't support PCIe Gen 3 speed, so even though we forced to turn on PCIe Gen 3.0 setting in Raspberry Pi 5, it is limited by ASMedia ASM1182e PCIe switch. speed is still PCIe Gen 2.0 speed.
38,50 € AUF AMAZON
Geekworm
Geekworm X1011 PCIe to 4PCS M.2 Key-M NVMe SSD Peripheral Board for Raspberry Pi 5 (Not Support RAID)
Kostenloser Versand
88
HOHE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#5
▼ Mehr anzeigen
▲ Weniger anzeigen
【Compatibility】Only compatible with Raspberry Pi 5
【Support 4pcs M2 NVMe SSDs】Support M.2 KEY-M NVMe SSD 2230/2242/2260/2280 length installation. Comes with SSD copper pillar for 2230/2242/2260 SSD installation.
【Support NVMe Boot】Support NVMe boot with eeprom 2024/05/17 version and later version.
【How to Power】Powering via both pogo pins & FFC or DC power jack, ensuring sufficient power supply. Recommend to use Geekworm PD 27W power adapter (ASIN: B0CZCZF2QV). Don't power the X1011 via DC powe jack and the Raspberry Pi5 via USB-C at the same time!!!
【Packing List】1 x X1011 PCIe to M2 NVMe Shield, 2 x PCIe FFC cable (one as backup), 1x Screws Pack
【Important Notes】1. X1011 does NOT support PCIe 3.0 speed. 2. The X1011 currently does not support all RAID types.
52,80 € AUF AMAZON
Geekworm
Geekworm Raspberry Pi 5 Gehäuse mit Active Cooler Kit, Support Top PCIe to M.2 NVMe Adapter X1001 / X1004 / X1003 / X1012 / X1015 / X1000 / M901 / M300 (P579-H500)
Kostenloser Versand
82
SICHERE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#6
▼ Mehr anzeigen
▲ Weniger anzeigen
【Compatibility】① for Raspberry Pi 5 with TOP PCIe to M2 NVMe shield like X1001 (ASIN: B0CPLF6JYX), X1004 (ASIN: B0D22JPQRB), X1003 (ASIN:B0CSJZ7NSS), X1012 (ASIN: B0D6YBTYT4), M901(ASIN; B0D179YJ9K) , X1000 (ASIN: B0CQ4NTZ7G) ②for separate Raspberry Pi 5 16GB / 8GB / 4GB Motherboard
【Official Raspberry Pi 5 Active Cooler Included】Input voltage: 5V DC supplied via four-pin fan header on Raspberry Pi 5; Fan speed control: Pulse width modulation control with tachometer; Maximum airflow: 1.09 CFM; Maximum fan speed: 8000 RPM +/- 15%
【Easy Access to Pi 5】P579 Raspberry Pi 5 Case can easy access to Raspberry Pi 5 usb-c power jack, micro HDMI ports, usb ports, Ethernet jack, sd card slot, power button, etc.
【Packing List】1 x metal case with accessories (P579), 1x Raspberry Pi 5 Official Active Cooler;
【NOTE】NOT include Raspberry Pi 5, PCIe to M.2 NVMe SSD Shield, SSD or power adapter!!!
23,50 € AUF AMAZON
Geekworm
Geekworm Raspberry Pi 5 Gehäuse Case (P579) | Support PCIe M.2 NVMe SSD Shield Top X1001 / X1003 / X1004 / X1012 / X1015 / X1000 / X1015 / M901 / M300 & Raspberry Pi 5 Active Cooler
Kostenloser Versand
81
GUTE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#7
▼ Mehr anzeigen
▲ Weniger anzeigen
【for use with】① for Raspberry Pi 5 with PCIe M.2 NVMe Shield TOP like X1001 (ASIN: B0CPLF6JYX), X1003 (ASIN: B0CSJZ7NSS), X1004(ASIN: B0D22JPQRB), X1012 (ASIN: B0D6YBTYT4), X1000 (ASIN: B0CQ4NTZ7G), M901(ASIN: B0D179YJ9K), X1015 (ASIN: B0D89MLNTQ), M300 (ASIN: B0CSYPTWQD) ②for separate Raspberry Pi 5 16GB / 8GB / 4GB Motherboard
【Raspberry Pi 5 Active Cooler Supported (NOT included)】Supports Raspberry Pi 5 active cooler installation, together with beautifully crafted cooling holes to ensures efficient heat dissipation
【Easy Access to Pi 5】P579 Raspberry Pi 5 Case can easy access to Raspberry Pi 5 usb-c power jack, micro HDMI ports, usb ports, Ethernet jack, sd card slot, power button,etc.
【Packing List】1 x P579 metal case, 1x 4pcs Rubber Pads; 1x Screws Pack Accessories
【NOTE】NOT include Raspberry Pi 5 motherboard, M.2 NVMe SSD Shield, M.2 NVMe SSD, Raspberry Pi 5 Active Cooler, or power adapter!!!
√ P579 Case with Official Active Cooler, refer to ASIN: B0CT4P893Q;
12,65 € AUF AMAZON
Geekworm
Geekworm X1003 PCIe to M.2 NVMe SSD Pip PCIe Peripheral Board Top for Raspberry Pi 5 & Active Cooler
Kostenloser Versand
78
GUTE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#8
▼ Mehr anzeigen
▲ Weniger anzeigen
【IMPORTANT NOTE】X1003 MUST use with Raspberry Pi 5 official Active Cooler
【Compatibility】Raspberry Pi 5 PCIe HAT only for Raspberry Pi 5 16GB / 8GB / 4GB, Model: X1003
【M2 Key-M NVMe SSD Supported】Support M.2 KEY-M NVMe SSD 2230/2242 length installation. (Do not reserve the nut column to fix the 2230 SSD) 【IMPORTANT】DON'T use NVMe SSD with Phison controller, please refer to: https://wiki.geekworm.com/X1003#Important_Notes
【How to Power】Can power the X1003 shield directly from the FFC PCIe ribbon (providing maximum 5W of continuous power) Recommend to use Geekworm PD 27W power adapter (ASIN: B0CP8SRXSC)
【Packing List】1 x X1003 PCIe Peripheral Board, 1x Screws Pack Accessories
【Matching Case (NOT included)】Refer to P579 (ASIN: B0CRB3DT5M); Or P579 Case with Active Cooler (ASIN: B0CT4P893Q); Or Argon NEO 5 Case (ASIN: B0CR1JPCM7); Or P425 ABS Case (ASIN: B0CYQ3T5DF); Or Raspberry Pi 5 official ABS case
14,00 € AUF AMAZON
Geekworm
Geekworm H505 Active Cooler Fan for Raspberry Pi 5, Aluminum Heatsink with Blower PWM Fan
Kostenloser Versand
73
GUTE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#9
▼ Mehr anzeigen
▲ Weniger anzeigen
【Raspberry Pi 5 Active Cooler】Aluminum heatsink with blower PWM fan for Raspberry Pi 5 16GB / 8GB / 4GB; Model: H505
【PWM Fan Speed Control】H505 active cooler uses a blower fan to expel heat more efficiently. Supports PWM speed regulation
【Good Heat Dissipation】With ultra-quiet 3007 cooling fan and thermal pads, heat dissipation is ranking right on par with official raspberry pi 5 active cooler
【Application】H505 supports stacking most of the Raspberry Pi 5 expansion boards, but not compatible with X1003 as X1003 should install with official active cooler or H501 (ASIN: B0D2VWTQXR)
【Packing List】1 x H505 active cooler for Raspberry Pi 5, 1 x 3007 Cooling Fan, 1 x Thermal Pads Pack
9,80 € AUF AMAZON
Geekworm
Geekworm X1205 5V UPS HAT Shield for Raspberry Pi 5|Max 5.1V 6A Output|Wide 9-18V Input|Auto Power On|Safe Shutdown|Power Loss Detection Function
Kostenloser Versand
64
GUTE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#10
▼ Mehr anzeigen
▲ Weniger anzeigen
Compatibility: Pi 5 UPS HAT compatible with Raspberry Pi 5 16GB/8GB/4GB; Model: X1205, Matching Case is X1205-C1
Function: X1205 provides max 5.1V 5000mA Power Backup, intelligent and safe power management like auto power on, safe shutdown, power loss and power adapter failure detection
How to Power (3 options): 1. 5Vdc via USB Type-C of X1205; 2. 9-18Vdc via DC5521 barrel of X1205; 3. 9-18Vdc via XH2.54 connector of X1205 (NOT including XH2.54 power cable)
2-Cell 21700 Battery Supported: Battery length max 70.5mm, diameter max 21.1mm (NOT include batteries, please prepare yourself!)
Packing List: 1 x X1205 UPS Shield, 4 x CM2.5 x 4 mm screws; Not include Raspberry Pi 5, batteries or power adapter
58,00 € AUF AMAZON
geekworm
geekworm x1001
#1 GEWINNER
