Geekworm X1001
Die 10 besten Produkte von Dezember 2025
Letzte Aktualisierung:
13. Dezember 2025
Geekworm
Geekworm X1001 PCIe to M.2 NVMe Key-M SSD Shield for Raspberry Pi 5
99
MAXIMALE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#1 GEWINNER
▼ Mehr anzeigen
▲ Weniger anzeigen
【Compatibility】Only for Raspberry Pi 5 16GB / 8GB / 4GB (NOT included)
【Matching Case (NOT included)】P579 (ASIN: B0CRB3DT5M); Or P579 Case with Official Active Cooler (ASIN: B0CT4P893Q)
【M2 Key-M NVMe SSD Supported】Support M.2 KEY-M NVMe SSD 2230/2242/2260/2280 length installation.【IMPORTANT】DON'T use NVMe SSD with Phison controller, please refer to: https://wiki.geekworm.com/X1001#Important_Notes
【How to Power】Use 5Vdc +/-5%, 5A to power via Raspberry Pi 5, and Pi 5 will power X1001 via FFC PCIe ribbon. Recommend to use Geekworm PD 27W power adapter (ASIN: B0FGPSRQ75 / B0CZCZF2QV / B0CP8SRXSC)
【Packing List】1 x X1001 Shield, 1x Accessories Pack
12,93 € AUF AMAZON
Geekworm
Geekworm Raspberry Pi 5 Gehäuse mit Active Cooler Kit, Support Top PCIe to M.2 NVMe Adapter X1001 / X1004 / X1003 / X1012 / X1015 / X1000 / M901 / M300 (P579-H500)
96
BESTE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#2
▼ Mehr anzeigen
▲ Weniger anzeigen
【Compatibility】① for Raspberry Pi 5 with TOP PCIe to M2 NVMe shield like X1001 (ASIN: B0CPLF6JYX), X1004 (ASIN: B0D22JPQRB), X1003 (ASIN:B0CSJZ7NSS), X1012 (ASIN: B0D6YBTYT4), M901(ASIN; B0D179YJ9K) , X1000 (ASIN: B0CQ4NTZ7G) ②for separate Raspberry Pi 5 16GB / 8GB / 4GB Motherboard
【Official Raspberry Pi 5 Active Cooler Included】Input voltage: 5V DC supplied via four-pin fan header on Raspberry Pi 5; Fan speed control: Pulse width modulation control with tachometer; Maximum airflow: 1.09 CFM; Maximum fan speed: 8000 RPM +/- 15%
【Easy Access to Pi 5】P579 Raspberry Pi 5 Case can easy access to Raspberry Pi 5 usb-c power jack, micro HDMI ports, usb ports, Ethernet jack, sd card slot, power button, etc.
【Packing List】1 x metal case with accessories (P579), 1x Raspberry Pi 5 Official Active Cooler;
【NOTE】NOT include Raspberry Pi 5, PCIe to M.2 NVMe SSD Shield, SSD or power adapter!!!
23,50 € AUF AMAZON
Geekworm
Geekworm Raspberry Pi 5 Gehäuse Case (P579) | Support PCIe M.2 NVMe SSD Shield Top X1001 / X1003 / X1004 / X1012 / X1015 / X1000 / X1015 / M901 / M300 & Raspberry Pi 5 Active Cooler
94
TOP QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#3
▼ Mehr anzeigen
▲ Weniger anzeigen
【for use with】① for Raspberry Pi 5 with PCIe M.2 NVMe Shield TOP like X1001 (ASIN: B0CPLF6JYX), X1003 (ASIN: B0CSJZ7NSS), X1004(ASIN: B0D22JPQRB), X1012 (ASIN: B0D6YBTYT4), X1000 (ASIN: B0CQ4NTZ7G), M901(ASIN: B0D179YJ9K), X1015 (ASIN: B0D89MLNTQ), M300 (ASIN: B0CSYPTWQD) ②for separate Raspberry Pi 5 16GB / 8GB / 4GB Motherboard
【Raspberry Pi 5 Active Cooler Supported (NOT included)】Supports Raspberry Pi 5 active cooler installation, together with beautifully crafted cooling holes to ensures efficient heat dissipation
【Easy Access to Pi 5】P579 Raspberry Pi 5 Case can easy access to Raspberry Pi 5 usb-c power jack, micro HDMI ports, usb ports, Ethernet jack, sd card slot, power button,etc.
【Packing List】1 x P579 metal case, 1x 4pcs Rubber Pads; 1x Screws Pack Accessories
【NOTE】NOT include Raspberry Pi 5 motherboard, M.2 NVMe SSD Shield, M.2 NVMe SSD, Raspberry Pi 5 Active Cooler, or power adapter!!!
√ P579 Case with Official Active Cooler, refer to ASIN: B0CT4P893Q;
AUF AMAZON ANSEHEN
Geekworm
Geekworm X1205-C1 Metal Case for Raspberry Pi 5 and X1205 UPS and Active Cooler and X1001/X1003/X1004/X1015/M901/X1000 PCIe Top
91
HOHE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#4
▼ Mehr anzeigen
▲ Weniger anzeigen
UPS Case for Raspberry Pi 5: Metal Case for Raspberry Pi 5 and X1200 UPS ONLY, support active cooler and Top PCIe board installation, Model: X1205-C1
Support Stacking TOP Raspberry Pi 5 PCIe Adapter: Space reserved for mounting TOP PCIe to NVMe Shield above Raspberry Pi 5. Such as X1001/X1004/X1003/X1000/X1015/M901
Case Dimensions: 91 x 76 x 64 mm / 3.58 x 2.99 x 2.52 inches
Accurate Hole Placement: Easy to insert and remove SD card, easily access to X1205 power button
Wall Mountable: With VESA mounting hole, you can hang it on the wall or somewhere you want
Packing List: 1 x X1205-C1 Metal Case, 1 x Screws Pack; NOT include Raspberry Pi 5, battery, X1205 UPS, or PCIe to NVMe Shield
18,00 € AUF AMAZON
Geekworm
Geekworm X1002 M.2 NVMe SSD Pip PCIe Peripheral Board Bottom Base for Raspberry Pi 5
88
HOHE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#5
▼ Mehr anzeigen
▲ Weniger anzeigen
【Compatibility】only for Raspberry Pi 5 16GB / 8GB / 4GB (NOT included)
【M2 Key-M NVMe SSD Supported】Support M.2 KEY-M NVMe SSD 2230/2242/2260/2280 length installation. 【IMPORTANT】DON'T use NVMe SSD with Phison controller, please refer to: https://wiki.geekworm.com/X1002#Important_Notes
【How to Power】Use 5Vdc +/-5%, 5A to power via Raspberry Pi 5, and Pi 5 will power X1002 via FFC PCIe ribbon. And 2pcs pogo pins to supplementary power during large data transfer. Recommend to use Geekworm PD 27W power adapter (ASIN: B0FGPSRQ75)
【Packing List】1 x X1002 PCIe to NVMe Base, 1x Accessories Pack
【Matching Case (NOT included)】Refer to P580 Case (ASIN: B0D99HVX3C)
【Cooling Solution (NOT included)】Support Raspberry Pi 5 Active Cooler installation, or Geekworm H505 Active Cooler (ASIN: B0D44Y95GW), H509 Passive Cooler (ASIN: B0DDPWYLY1), Argon THRML 30mm Active Cooler (ASIN: B0CSJQC7DV)
【UPS Solution (NOT included)】Support work with X728 UPS (ASIN: B087J7WTYM), but there is no case for X1002 and X728
15,80 € AUF AMAZON
Geekworm
Geekworm X1300-C1 Metal Case for Raspberry Pi 5 and X1300 Hdmi to CSI-2 / X1001 / X1003 / X1004 PCIe to NVMe Shield/Official Active Cooler
80
GUTE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#6
▼ Mehr anzeigen
▲ Weniger anzeigen
Compatible With: ① for Raspberry Pi 5 and X1300 hdmi to csi module(ASIN: B0FFM8HQKQ) ②for separate Raspberry Pi 5 SBC installation ③ for Raspberry Pi 5 and X1001 (ASIN: B0CPLF6JYX) / X1003 (ASIN: B0CSJZ7NSS) / X1004 (ASIN: B0D22JPQRB)
Raspberry Pi 5 Active Cooler Supported: Support Raspberry Pi 5 official active cooler /Geekworm H505 (ASIN: B0D44Y95GW) / H509 (ASIN: B0DDPWYLY1) installation
Easy Access to Pi 5: X1300-C1 Raspberry Pi 5 Case can easy access to Raspberry Pi 5 USB-C power jack, micro HDMI ports, usb ports, Ethernet jack, micro SD card slot, power button etc
Packing List:1 x X1300-C1 metal case, 1 x Installation Screws Pack
Note: 1. NOT include Raspberry Pi 5, X1300, active cooler or power adapter!!! 2. Wifi signal may be slightly affected by matel case, please use wired Ethernet if necessary.
12,80 € AUF AMAZON
GeeekPi
GeeekPi Raspberry Pi 5 Aluminiumgehäuse mit Official Active Cooler, Support PCIe M.2 NVMe SSD Shield Top X1001 / X1000 / N04 / N05
15% Rabatt
80
GUTE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#7
▼ Mehr anzeigen
▲ Weniger anzeigen
【Compatibility】① Support Raspberry Pi 5 with PCIe M.2 NVMe Shield TOP like N04 (ASIN: B0CTLX5MW5), N05 (ASIN: B0CTLT39Y3) ②Support separate Raspberry Pi 5 8GB / 4GB Motherboard ③ Support Official Raspberry Pi 5 Active Cooler
【Official Raspberry Pi 5 Active Cooler Included】The Raspberry Pi Active Cooler for Raspberry Pi 5 is a dedicated clip-on cooling solution for Raspberry Pi 5. It combines an aluminium heatsink with a temperature-controlled blower fan to keep your Raspberry Pi 5 at a comfortable operating temperature, even under heavy loads.
【Robust and Portable】This Raspberry Pi 5 Aluminum Case is made of High-Quality Aluminum alloy material, can provide a strong and durable protection for your Raspberry Pi 5 Board.
【Easy Access to all Ports】GeeekPi Raspberry Pi 5 Case can accurately access usb-c power jack, micro HDMI ports, usb ports, Ethernet jack, sd card slot, power button, 4-lane MIPI DSI/CSI connectors and so on.
【Package Includes】1x Aluminum Case for Raspberry Pi 5, 1x Official Raspberry Pi 5 Active Cooler; 1x Screws Pack,1x 4pcs Rubber Pads; 1x Screwdriver. Please noted: The Raspberry Pi Board is not included in the package.
20,37 € AUF AMAZON
Geekworm
Geekworm X1005 Dual NVMe SSD Shield Bottom for Raspberry Pi 5, Supports Hailo-8 AI Accelerator
77
GUTE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#8
▼ Mehr anzeigen
▲ Weniger anzeigen
【Compatibility】Raspberry Pi 5 Dual NVMe Hat only compatible with Raspberry Pi 5, Model: X1005
【Support Dual M2 NVMe SSD with multiple length】Support M.2 KEY-M NVMe SSD 2230/2242/2260/2280 length installation. Comes with SSD copper pillar for 2230/2242/2260 SSD installation
【 Raspberry Pi 5 AI Hat Extension】 Supports Hailo AI acceleration module built around the Hailo-8L chip from Raspberry Pi AI Kit
【 Support NVMe Boot】 Supports NVMe boot with eeprom 2024/05/17 and later version
【How to Power】 5Vdc +/-5% power via GPIO pin header and FFC, converted to 3.3V max 3A to power the SSD; Recommend to use Geekworm PD 27W power adapter (ASIN:B0CP8SRXSC) or (ASIN:B0CZCZF2QV)
【Packing List】1 x X1005 PCIe Peripheral Board, 2x 37mm PCIe FFC Cable(One as backup), 1x Screws Pack
【Matching Case (NOT include)】Refer to P580-V2 Case (ASIN: B0D99HVX3C). NOT compatible with P580!
38,00 € AUF AMAZON
Geekworm
Geekworm X1004 Dual M.2 NVMe SSD Shield PCIe Peripheral Board for Raspberry Pi 5
71
GUTE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#9
▼ Mehr anzeigen
▲ Weniger anzeigen
【Compatibility】only for Raspberry Pi 5 16GB / 8GB / 4GB (NOT included)
【Support Dual M2 SSD】Compatible with M.2 KEY-M NVMe SSD 2280 (NOT included)
【How to Power】5Vdc +/-5%, 5A via Raspberry Pi 5. Recommend to use Geekworm PD 27W power adapter (ASIN: B0CP8SRXSC); or GaN PD 27W power supply (ASIN: B0CZCZF2QV)
【Support NVMe Boot】X1004 now supports NVMe boot with the latest eeprom (2024/05/17 version)
【Packing List】1 x X1004 PCIe to M2 NVMe Shield, 1x Accessories Pack
【Matching Case (NOT included)】Refer to P579-V2 Case (ASIN: B0CRB3DT5M), or P579-V2 Case with active cooler (ASIN: B0CT4P893Q)
【Note】Since X1004 is using ASMedia ASM1182e PCIe switch, it can't support PCIe Gen 3 speed, so even though we forced to turn on PCIe Gen 3.0 setting in Raspberry Pi 5, it is limited by ASMedia ASM1182e PCIe switch. speed is still PCIe Gen 2.0 speed.
38,50 € AUF AMAZON
ELECTROCOOKIE
ElectroCookie Raspberry Pi 5 Gehäuse, kompaktes Aluminiumgehäuse mit M.2 NVMe SSD PCIe HAT und aktivem RGB-Beleuchtungskühler (schwarzes Gehäuse + M.2-HAT[X1001])
69
GUTE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#10
▼ Mehr anzeigen
▲ Weniger anzeigen
Aluminiumgehäuse für Raspberry Pi 5 (nicht kompatibel mit Pi 4 aufgrund unterschiedlicher USB/Ethernet-Standorte)
Aktives CPU-Kühlsystem mit großem Turm-Kühlkörper und temperaturgesteuertem PWM (Speed Control) Lüfter
***Kompatibles M.2 HAT NVMe SSD Shield:B0DLW4DNXB (ECR5_SSDS) in den USA, B0DQW14GWW in UK/EU/AU und B0DQXQ7NWL in Japan - für erweiterten SSD-Speicher und ultraschnelle Leistung. (NVMe Shield separat erhältlich)
Geräuscharmer RGB-Lüfter für ruhige Arbeitsumgebung (*** Bitte überprüfen Sie die Ausrichtung des Lüfters im Handbuch. Falsche Ausrichtung kann Reibungsgeräusche zwischen einem sich drehenden Rad und gegenüberliegender Oberfläche verursachen)
Voll zugängliche Power-Taste und GPIO-Pins über abgewinkelten Verlängerungsstecker
Farbwechselndes RGB-Stimmungslicht, hochwertiges eloxiertes Aluminiumgehäuse mit transparenten dunkelgrauen Abdeckungen
35,99 € AUF AMAZON
geekworm
geekworm x1001 pcie
geekworm x1005
geekworm x1001 nvme hat
#1 GEWINNER
