main logo

Waveshare V3

Die 10 besten Produkte von Oktober 2025
Letzte Aktualisierung: 9. Oktober 2025
Waveshare
Waveshare
Waveshare 2.13inch E-Paper Display HAT, V4 Version 250x122 Resolution, Supports Black/White 2-Color, Compatible with Jetson Nano/Raspberry Pi 4B/3B+/3A+/3B/2B/1B+/1A+/Zero 2 W/Zero W/Zero
Kostenloser Versand
star

99

MAXIMALE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#1 GEWINNER

  • This is an E-Ink display HAT for Raspberry Pi, 2.13inch, 250x122 resolution, with embedded controller, communicating via SPI interface, supports partial refresh.
  • Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.
  • No backlight, keeps displaying last content for a long time even when power down. Ultra low power consumption, basically power is only required for refreshing.
  • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano. SPI interface, for connecting with other controller boards like/Nucleo, etc. But incompatible with Netatmo.Onboard voltage translator, for 3.3V/5V MCUs.
  • Note:Please check the version of display and use the corresponding demo code in wiki!!!Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/STM32).
  • 20,99 € AUF AMAZON
Waveshare
Waveshare
Waveshare 2.13inch e-Paper Display Hat 250x122 Resolution SPI E-Ink Screen Electronic Paper Module with Embedded Controller Partial Refresh for Raspberry Pi Zero/Zero W/Zero WH for pwnagotchi Project
Kostenloser Versand
star

98

MAXIMALE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#2

  • Note:Please check the verison and use the corresponding demo code in wiki.No backlight, keeps displaying last content for a long time even when power down
  • Ultra low power consumption, basically power is only required for refreshing
  • Compatible with Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+,Jetson Nano,but incompatible with Netatmo
  • SPI interface, for connecting with other controller boards like Arduino/Nucleo, etc. Onboard voltage translator, compatible with 3.3V/5V MCUs
  • Comes with development resources and manual (examples for Raspberry/Jetson Nano/Arduino/STM32)
  • 20,99 € AUF AMAZON
IBest
IBest
waveshare 2.13inch E-Paper Display HAT V4 Version 250x122 Resolution 3.3V/5V Two-Color e-Ink Display epaper Screen for Raspberry Pi Zero/Zero W/Zero WH/3B/3B+/4B, Partial Refresh, SPI Interface
Kostenloser Versand
star

94

TOP QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#3

  • Compatible with Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+/4B
  • Ultra low power consumption, basically power is only required for refreshing
  • SPI interface, for connecting with other controller boards like Arduino/Nucleo, etc.
  • Onboard voltage translator, compatible with 3.3V/5V MCUs,Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)
  • No backlight, keeps displaying last content for a long time even when power down
  • 20,15 € AUF AMAZON
Waveshare
Waveshare
Waveshare Argon BLSTR DAC Board Kit, Add-On for Argon ONE V3 Case Only, Easy Installation, Plug and Play, Enjoy and Premium Audio Performance
Kostenloser Versand
star

88

HOHE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#4

  • Argon BLSTR DAC Board Kit, Add-On For Argon ONE V3 Case-Enjoy high quality and premium audio performance from your Pi 5
  • Plug And Play-Easy Installation And Audio Out Through 3.5mm Audio Port With Argon BLSTR DAC Plug And Play Board
  • Pure Sound Quality-Enhance Audio Clarity With Included Ground Loop Isolator To Eliminate Interfering Noise Due To Common Ground And Enjoy Pure Sound Quality
  • Easy To Install-Plug The BLSTR DAC Expansion Board Into The Reserved Header Of Argon ONE V3 Case Baseboard
  • 41,99 € AUF AMAZON
Waveshare
Waveshare
Waveshare 2PCS 2.13inch E-Ink Display HAT V4 Version Compatible with Raspberry Pi 4B/3B+/3B/2B/B+/A+/Zero/Zero W/WH/Zero 2W Series Boards 250x122 Resolution SPI Interface Supports Partial Refresh
Kostenloser Versand
star

87

SICHERE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#5

  • 2PCS Version, Provide online user manual, please check the manual carefully before using!
  • IMPORTANT: Rev2.1 is the version of the driver board, which is independent of the screen version. Currently, there is only Rev2.1; QC target V3 and V4 are screen versions, and V4 is currently being shipped. V4 version is fully compatible with V3; and it provides the demo that can realize a fast refreshing function.
  • This is an E-Ink display HAT for Raspberry Pi, 2.13inch, 250x122 resolution, with embedded controller, communicating via SPI interface, supports partial refresh.
  • Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.No backlight, keeps displaying last content for a long time even when power down. Ultra low power consumption, basically power is only required for refreshing
  • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano. SPI interface, for connecting with other controller boards like Arduino/Nucleo, etc. Onboard voltage translator, compatible with 3.3V/5V MCUs
  • 36,99 € AUF AMAZON
Waveshare
Waveshare
2.13inch E-Paper HAT+ for Raspberry Pi 5/4B/3B/Zero/Zero W/Jetson Nano,250x122 Pixels e-Ink Display HAT V4,Black and White epaper Screen,SPI Interface
Kostenloser Versand
star

82

SICHERE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#6

  • 2.13inch E-Paper HAT+ For Raspberry Pi/ Jetson Nano,Adopts Raspberry Pi HAT+ standard to improve interoperability, helping the users to design and develop faster, easy to use with other peripherals and extend more functions for Raspberry Pi
  • Onboard high-precision RTC chip for accurate time control.Optimized PCB layout with additional mounting holes for fixing screws
  • Adopts Immersion Gold process, anti-oxidation and anti-corrosion, enhances soldering performance and improves electrical properties, with better durability and reliability to meet various applications
  • No backlight, keeps displaying last content for a long time even when power down
  • Comes with online development resources and manual,driver board circuit diagram,examples for Raspberry Pi OS / Jetson Nano, etc. and provides pwnagotchi porting tutorial
  • 26,89 € AUF AMAZON
Waveshare
Waveshare
Waveshare ESP32-S3 4inch Capacitive Touch Display Development Board V3(Latest Version), 480x480, 5-Point Touch, 32-Bit LX7 Dual-Core Processor, Up to 240MHz Frequency, Support WiFi, Onboard Antenna
Kostenloser Versand
star

78

GUTE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#7

  • ESP32-S3-Touch-LCD-4 is a microcontroller development board with 2.4GHz WiFi and BLE 5 support, integrates 16MB Flash and 8MB PSRAM. Onboard 4inch 480 × 480 capacitive touch screen can smoothly run GUI programs such as LVGL. Combined with various peripheral interfaces to quickly develop the HMI of ESP32-S3, suitable for scenarios such as smart control panel, home gateway, intelligent interactive panel, industrial control, and smart lighting control.
  • Equipped with Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency. Supports 2.4GHz Wi-Fi (802.11 b/g/n) and BT5 (LE), with onboard antenna. Supports capacitive touch control via I2C interface, 5-point touch with interrupt support
  • Built in 512KB SRAM and 384KB ROM, with onboard 16MB Flash and 8MB PSRAM. Onboard 4inch capacitive touch display, 480×480 resolution, 65K color. Features optimized RS485 solution, power isolation, TVS, and power supply.
  • Onboard CAN, RS485, I2C interface and TF card slot, and integrates full-speed USB port
  • Supports flexible clock, module power supply independent setting and other controls to realize low power consumption in different scenarios
  • 47,99 € AUF AMAZON
Waveshare
Waveshare
Waveshare Argon ONE V3 M.2 NVME PCIE Gehäuse für Raspberry Pi 5, Aluminum Alloy Case with Built-in Cooling Fan & M.2 NVME Expansion Slot
Kostenloser Versand
star

78

GUTE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#8

  • Decent Looking, Stunning Aesthetics-Adopts Black ABS Bottom Case With Black Aluminum Top Cover, Simple & Nice Looking. "ALWAYS ON" Feature-Automatically Starting The Pi On Power-Up, Enabled Via Jumper
  • Dedicated PCIe To M.2 Expansion Base-Reserved M.2 NVME Solid State Drive Slot, With Built-In Heatsink. Precise Opening Design-Reversed GPIO Slot And Openings For Sorts Of Connectors, With Clear Labels
  • Active + Passive Cooling-The Whole Case Top Acts As A Passive Cooling For The Raspberry Pi, Combined With The Included Cooling Fan And Multiple Airflow Vents, Brings Excellent Cooling Effect
  • Reserved DAC Expansion Board Header-Supports Connecting With DAC Expansion Board To Activate 3.5mm Audio Jack For Raspberry Pi 5. * Note: the DAC board is not included. Neat Cable Management-All Of The Ports Are Accessed At The Back, Minimal Cable Clutter. * Note: the DAC board is required to activate 3.5mm Audio Jack
  • Safe & Handy Power Button-Combined With One-Line Script To Turn The Computer On / Off While Ensuring The Stored Files Are Safe, Also Supports Customized Function. Easy Assembly-Just A Few Steps To Go, No Messy Wiring, No Wrong Connection, More Stable, More Safe
  • 66,99 € AUF AMAZON
EASTRON
EASTRON
Eastron SDM630Modbus-V3 Drehstromzähler digitaler Stromzähler für Hutschiene, Multifunktional, Bidirektional mit 2x S0, RS485 Modbus-RTU
Kostenloser Versand
star

75

GUTE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#9

  • MID calibrated consumption meter approved for billing (e.g. rental, e-mobility)
  • netted active and reactive power, bidirectional measuring with sign at energy output
  • Many measured values (also per phase) can be easily read directly via the clear, illuminated display
  • RS485 Modbus-RTU and two S0 interfaces for remote reading or energy management systems
  • Bidirectional, direct measurements up to max. 80A per phase, 4HP width for 35mm DIN rail
  • 112,99 € AUF AMAZON
Waveshare
Waveshare
Waveshare V4 2.13inch E-Paper HAT+ for Raspberry Pi Zero/Zero W /5/4B/3B, E-Ink Screen for Pwnagotchi Kit, 250x122, Immersion Gold Process, SPI Interface, Upgraded HAT+ Standard
Kostenloser Versand
star

69

GUTE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#10

  • 2.13″ E-Paper HAT+, compared to the previous Waveshare V2, Waveshare V3 and Waveshare V4 basic versions, this latest V4 version with upgraded HAT+ Standard brings improved interoperability. Support Partial Refresh, Low Power, 170° Wide Viewing Angle, Black and White Color, Paper-Like Effect
  • With standard Pi 40PIN GPIO Header, compatible With Raspberry Pi Series Boards/Jetson Nano. Onboard high-precision RTC chip for accurate time control. Optimized PCB layout with additional mounting holes for fixing screws
  • Adopts Immersion Gold process, anti-oxidation and anti-corrosion, enhances soldering performance and improves electrical properties, with better durability and reliability to meet various applications. Thin and light design, compact in Size, more space-saving
  • Adopts Pi HAT+ standard to improve interoperability, helping the users to design and develop faster, easy to use with other peripherals and extend more functions for Raspberry Pi
  • No backlight required, can maintain the display content of the last screen for a long time when powered off. Can provide with online development resources and manual, such as driver board circuit diagram, examples for Raspberry Pi OS/Jetson Nano and can provide pwnagotchi porting tutorial
  • 27,99 € AUF AMAZON
waveshare v3 5zoll waveshare