main logo

Waveshare Esp32-s3 Eth

Die 10 besten Produkte von Juni 2025
Letzte Aktualisierung: 8. Juni 2025
Waveshare
Waveshare
Waveshare ESP32-S3-POE-ETH-8DI-8RO-C(PoE Network Port), Industrial 8-Ch ESP32-S3 WiFi Relay Module, Isolated CAN Interface, Xtensa 32-Bit LX7 2Core Processor, Up to 240MHz, Multi Isolation Protection
star

92

TOP QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#4

  • PoE network port version, with built-in PoE module for PoE capability (compliant with IEEE 802.3af standard). Based on ESP32-S3 microcontroller with Xtensa 32-bit LX7 dual-core processor, capable of running at 240 MHz. Integrated 2.4GHz Wi-Fi and BT LE dual-mode wireless communication, with superior RF performance
  • High quality relay, contact rating: ≤10A 250V AC / 30V DC. Supports passive and active digital input, with bi-directional optocoupler isolation. The relay supports digital input linkage control. Onboard isolated CAN interface, for connecting to various CAN devices. Onboard pin header, allowing access to other devices
  • Onboard USB Type-C port for power supply, firmware downloading and debugging. Onboard power supply screw terminal, supports 7~36V wide voltage input, suitable for industrial applications. Onboard RTC chip, supports scheduled tasks. Onboard W5500 Ethernet chip for extending 10/100Mbps network port through SPI interface
  • Onboard optocoupler isolation to prevent interference from external high-voltage circuit connected to the relay. Onboard digital isolation to prevent interference from external signal. Onboard unibody power supply isolation, providing stable isolated voltage, no extra power supply required for the isolated terminal
  • Onboard TF card slot for external TF card storage of images and files. Built-in buzzer, RGB LED, power supply and CAN TX/RX indicators for monitoring the operating status of the devices. Rail-mounted ABS case, easy to install, safe to use
  • 69,99 € AUF AMAZON
Waveshare
Waveshare
Waveshare Industrial 6-Channel ESP32-S3 WiFi Relay Module, Onboard RS485 / Pico HAT Interfaces, with Multiple Isolation Protection Circuits, Industrial-Grade, Rail-Mount Case
Kostenloser Versand
star

80

GUTE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#6

  • Based on ESP32-S3 microcontroller with Xtensa 32-bit LX7 dual-core processor, capable of running at 240 MHz. Built in buzzer, RGB colorful LED, power supply and RS485 TX/RX indicators for monitoring the operating status of the module
  • Integrated 2.4GHz Wi-Fi and Bluetooth LE dual-mode wireless communication, with superior RF performance. High quality relay, contact rating: ≤10A 250VAC/30VDC. Onboard isolated RS485 interface, for connecting to various RS485 Modbus industrial modules or sensors. Onboard USB Type-C port for power supply, firmware downloading and debugging
  • Onboard power supply screw terminal, supports 7~36V wide voltage input, suitable for industrial applications. Onboard digital isolation to prevent interference from external signal
  • Onboard optocoupler isolation to prevent interference from external high-voltage circuit connected to the relay. Rail-mounted ABS case, easy to install, safe to use
  • Onboard 40PIN header compatible with some Raspberry Pi Pico HAT, for expanding more functions such as RTC / CAN / RS232 / LoRa / sensor, etc. Onboard unibody power supply isolation, providing stable isolated voltage, no extra power supply required for the isolated terminal
  • 43,99 € AUF AMAZON
Waveshare
Waveshare
Waveshare ESP32-S3 1.46inch Round Display Development Board, 412×412, Supports Wi-Fi & BLT, Accelerometer and Gyroscope Sensor, Onboard Speaker and Microphone, with Protective Cover Glass
Kostenloser Versand
star

74

GUTE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#9

  • Equipped with ESP32-S3R8 high-performance Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency. Supports 2.4GHz Wi-Fi (802.11 b/g/n) and BLE 5 (LE), with onboard antenna. Built-in 512KB SRAM and 384KB ROM, with onboard 16MB Flash and 8MB PSRAM Rich WiKi Resources: We provide official Wiki resources, please contact us for more information.
  • Onboard Type-C port, more convenient, better device compatibility. Onboard 1.46inch LCD display, 412×412 resolution, 16.7M color. Supports touch function controlled via I2C interface, with interrupt support
  • Onboard QMI8658 6-axis IMU (3-axis accelerometer and 3-axis gyroscope) for detecting motion gesture, counting steps, etc.. Onboard PCF85063 RTC chip with reserved RTC battery header (supports charging) for RTC function requirement. Onboard programmable PWM and BOOT buttons for easy custom function development
  • Onboard 3.7V MX1.25 lithium battery recharge/discharge header. Onboard TF card slot for extended storage and fast data transfer, flexible for data recording and media playback, simplifying circuit design
  • Supports accurate control such as flexible clock and multiple power modes to realize low power consumption in different scenarios. Adapting multiple GPIO pins which can be mapped to various function interfaces, making it convenient for customers to customize and develop
  • 37,99 € AUF AMAZON
Waveshare
Waveshare
Waveshare ESP32-S3 1.69inch Touch Display Development Board, 240×280 Pixels, 262K Color, Compact Size, Micro LCD Display with ESP32-S3, Accelerometer and Gyroscope Sensor
Kostenloser Versand
star

69

GUTE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#10

  • Equipped with ESP32-S3R8 Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency. Built in 512KB of SRAM and 384KB ROM, with onboard 8MB PSRAM and an external 16MB Flash memory. Supports 2.4GHz Wi-Fi (802.11 b/g/n) and BT 5 (LE), with onboard antenna
  • Type-C connector, keeps it up to date, easier to use. Onboard 1.69inch 240X280 pixels 262K capacitive touch display for clear color pictures. Built-in ST7789V2 display driver and CST816T capacitive touch chip, using SPI and I2C communication respectively, effectively saving the IO resources
  • Onboard QMI8658 6-axis IMU (3-axis accelerometer and 3-axis gyroscope) for detecting motion gesture, counting steps, etc. Onboard PCF85063 RTC chip with reserved SH1.0 RTC battery header (supports charging) for RTC function requirement
  • Onboard RST, BOOT and a programmable PWM button for easy custom function development. Onboard 3.7V MX1.25 lithium battery recharge/discharge header. High touch screen transmittance, fast response and long lifetime
  • Reserved pads of 4 x GPIO, I2C, and UART interface, for connecting peripherals and debugging. Supports flexible clock, module power supply independent setting, and other controls to realize low power consumption in different scenarios
  • 32,99 € AUF AMAZON