main logo

Waveshare Eink 2.13 Display

Die 10 besten Produkte von Dezember 2025
Letzte Aktualisierung: 10. Dezember 2025
IBest
IBest
waveshare 2.13inch E-Paper Display HAT V4 Version 250x122 Resolution 3.3V/5V Two-Color e-Ink Display epaper Screen for Raspberry Pi Zero/Zero W/Zero WH/3B/3B+/4B, Partial Refresh, SPI Interface
star

98

MAXIMALE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#1 GEWINNER

  • Compatible with Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+/4B
  • Ultra low power consumption, basically power is only required for refreshing
  • SPI interface, for connecting with other controller boards like Arduino/Nucleo, etc.
  • Onboard voltage translator, compatible with 3.3V/5V MCUs,Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)
  • No backlight, keeps displaying last content for a long time even when power down
  • 20,15 € AUF AMAZON
Waveshare
Waveshare
Waveshare 2.13inch e-Paper Display Hat 250x122 Resolution SPI E-Ink Screen Electronic Paper Module with Embedded Controller Partial Refresh for Raspberry Pi Zero/Zero W/Zero WH for pwnagotchi Project
star

98

MAXIMALE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#2

  • Note:Please check the verison and use the corresponding demo code in wiki.No backlight, keeps displaying last content for a long time even when power down
  • Ultra low power consumption, basically power is only required for refreshing
  • Compatible with Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+,Jetson Nano,but incompatible with Netatmo
  • SPI interface, for connecting with other controller boards like Arduino/Nucleo, etc. Onboard voltage translator, compatible with 3.3V/5V MCUs
  • Comes with development resources and manual (examples for Raspberry/Jetson Nano/Arduino/STM32)
  • 20,99 € AUF AMAZON
Waveshare
Waveshare
Waveshare 2PCS 2.13inch E-Ink Display HAT V4 Version Compatible with Raspberry Pi 4B/3B+/3B/2B/B+/A+/Zero/Zero W/WH/Zero 2W Series Boards 250x122 Resolution SPI Interface Supports Partial Refresh
star

96

BESTE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#3

  • 2PCS Version, Provide online user manual, please check the manual carefully before using!
  • IMPORTANT: Rev2.1 is the version of the driver board, which is independent of the screen version. Currently, there is only Rev2.1; QC target V3 and V4 are screen versions, and V4 is currently being shipped. V4 version is fully compatible with V3; and it provides the demo that can realize a fast refreshing function.
  • This is an E-Ink display HAT for Raspberry Pi, 2.13inch, 250x122 resolution, with embedded controller, communicating via SPI interface, supports partial refresh.
  • Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.No backlight, keeps displaying last content for a long time even when power down. Ultra low power consumption, basically power is only required for refreshing
  • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano. SPI interface, for connecting with other controller boards like Arduino/Nucleo, etc. Onboard voltage translator, compatible with 3.3V/5V MCUs
  • 36,99 € AUF AMAZON
Waveshare
Waveshare
Waveshare 2.13inch Touch E-Paper E-Ink Display for Raspberry Pi Zero 250×122 Pixels Supports Partial Refresh with ABS Protection Case
star

88

HOHE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#4

  • 2.13" capacitive touch e-Paper display, 5-point touch, 250×122 pixels. Supports waken up by user-defined gesture
  • No backlight, keeps displaying last content for a long time even when power down
  • Ultra low power consumption, basically power is only required for refreshing
  • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi Zero / Zero W
  • Comes with development resources and manual (examples for Raspberry Pi)
  • 36,99 € AUF AMAZON
Waveshare
Waveshare
Waveshare 2.13inch E-Paper Display HAT, V4 Version 250x122 Resolution, Supports Black/White 2-Color, Compatible with Jetson Nano/Raspberry Pi 4B/3B+/3A+/3B/2B/1B+/1A+/Zero 2 W/Zero W/Zero
star

83

SICHERE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#5

  • This is an E-Ink display HAT for Raspberry Pi, 2.13inch, 250x122 resolution, with embedded controller, communicating via SPI interface, supports partial refresh.
  • Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.
  • No backlight, keeps displaying last content for a long time even when power down. Ultra low power consumption, basically power is only required for refreshing.
  • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano. SPI interface, for connecting with other controller boards like/Nucleo, etc. But incompatible with Netatmo.Onboard voltage translator, for 3.3V/5V MCUs.
  • Note:Please check the version of display and use the corresponding demo code in wiki!!!Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/STM32).
  • 20,99 € AUF AMAZON
Waveshare
Waveshare
Waveshare 2.13 Inch e-Paper Display HAT 250x122 Resolution V4 E-Ink Screen Electronic Paper Module with Embedded Controller for Raspberry Pi 2B 3B 3B+ Zero Zero W,SPI Interface
star

81

GUTE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#6

  • ink display, this is a hat for Raspberry Pi, 250 x 122 resolution, with embedded controller, communicate via SPI interface, supports partial refresh.
  • Note:Please check the version of display and use the corresponding demo code in wiki!!!
  • No backlight, keeps the contents displayed last for a long time even when power down.Very low power consumption, basically only required for refreshing
  • Compatible with Raspberry Pi 2B/3B/Zero/Null W, comes with development resources and manual (examples of Raspberry Pi/Arduino/STM32),but incompatible with Netatmo.
  • Get soldering points for SPI interface, for connecting with other controller boards such as Arduino/Nucleo, etc.
  • 20,99 € AUF AMAZON
Waveshare
Waveshare
Waveshare 2.13 Inch E-Paper Raw Display Panel(B) V4, 250x122 Resolution Red Black White Three-Color E-Ink Screen Electronic Paper Without PCB for Raspberry Pi/Jetson Nano/Arduino/STM32
star

81

GUTE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#7

  • Note:Version 4 please use corresponding demo code in wiki.This is an E-Ink raw display, 2.13inch, 250x122 resolution, with embedded controller, communicating via SPI interface, supports red, black, and white three-color display.
  • Due to the advantages like ultra low power consumption, wide viewing angle, great effect under sunlight, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.
  • No backlight, keeps displaying last content for a long time even when power down
  • Ultra low power consumption, basically power is only required for refreshing
  • Can prvide with development resources and manual (driver board schematic, examples for Raspberry Pi/Arduino/STM32)
  • 12,99 € AUF AMAZON
Waveshare
Waveshare
Waveshare 2.13inch E-Paper E-Ink Display Module (B) for Raspberry Pi Pico 212×104 Pixels Red/Black and White with SPI Interface Support Full Refresh
star

76

GUTE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#8

  • RESOLUTION:212×104 pixels,OPERATING VOLTAGE 3.3V,GREY SCALE:2,FULL REFRESH TIME:15s
  • No backlight, keeps displaying last content for a long time even when power down
  • Ultra low power consumption, basically power is only required for refreshing
  • SPI interface, requires minimal IO pins
  • Comes with development resources and manual (Raspberry Pi Pico C/C++ and MicroPython examples). Raspberry Pi Pico is NOT included.
  • 21,99 € AUF AMAZON
Waveshare
Waveshare
Waveshare 2.13 Inch E-Paper Display HAT (G) 250 x 122 Resolution 3.3 V/5 V Four-Colour e-Ink Display Paper Screen Module for Raspberry Pi 4B/3B+/3B/2B/Zero/Zero W/Zero WH, Jetson Nano,Arduino
star

74

GUTE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#9

  • No backlight, keeps displaying last content for a long time even when power down
  • SPI interface, for connecting with other controller boards like Raspberry Pi/Jetson Nano/Arduino/STM32, etc.
  • Ultra low power consumption, basically power is only required for refreshing
  • Onboard voltage translator, compatible with 3.3V/5V MCUs
  • Comes with online development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)
  • 24,99 € AUF AMAZON
Waveshare
Waveshare
250x122 Resolution 2.13 Inch e-Paper Display HAT E-Ink Screen LCD Module SPI Interface with Embedded Controller for Raspberry Pi 2B 3B 3B+ 4B Zero Zero W/Ardui/STM32/Jetson Nano
star

67

GUTE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#10

  • No backlight, keeps displaying last content for a long time even when power down;Ultra low power consumption, basically power is only required for refreshing
  • Standard for Raspberry Pi 40PIN GPIO extension header, fits Raspberry Pi series boards, Jetson Nano
  • Preserved solder pads for SPI interface, for connecting with other controller boards fits Arduino/Nucleo, etc.
  • Onboard voltage translator, compatible with 3.3V/5V MCUs
  • Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32), resources:www.waveshare.com/wiki/2.13inch_e-Paper_HAT
  • 20,15 € AUF AMAZON
waveshare eink 2.13 display v2 waveshare eink 2.13 v2 waveshare display eink waveshare eink display waveshare eink 2.7