main logo

Waveshare 7.5inch E-paper

Die 10 besten Produkte von Dezember 2025
Letzte Aktualisierung: 9. Dezember 2025
Waveshare
Waveshare
Waveshare 7.5 Inch E-Paper Display Hat Module V2 Kit 800x480 Resolution 3.3v/5v E-Ink Electronic Screen with Embedded Controller SPI Interface Compatible with Raspberry Pi/Jetson Nano/Arduino/STM32
star

98

MAXIMALE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#1 GEWINNER

  • Note:Version 2 please use corresponding demo code in wiki.This is an E-Ink display HAT for Raspberry Pi, 7.5inch, 800×480 resolution, with embedded controller, communicating via SPI interface. Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.
  • 69,99 € AUF AMAZON
Waveshare
Waveshare
Waveshare 7.5 Inch E-Paper Raw Display Panel V2 800x480 Resolution 3.3V E-Ink Electronic Paper Screen Without PCB with Embedded Controller,Communicating via SPI Interface
star

97

BESTE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#2

  • Note:Version 2 please use corresponding demo code in wiki.This is an E-Ink raw display, 7.5inch, 800×480 resolution, with embedded controller, communicating via SPI interface.Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.
  • Ultra low power consumption, basically power is only required for refreshing
  • Comes with development resources and manual (driver board schematic, examples for Raspberry Pi/Jetson Nano/Arduino/STM32)
  • No backlight, keeps displaying last content for a long time even when power down，Comes with development resources and manual (driver board schematic, examples for Raspberry Pi/Arduino/STM32)
  • Note that you cannot use Partial refresh all the time, you should full refresh e-paper regularly, otherwise, ghost problem will get worse even damage.Please set the e-Paper to sleep mode or power off it directly, otherwise, the e-Paper is damaged because of working in high voltage for long time. You need to update the content of three-color e-Paper at least one time every 24h to avoid from burn-in problem.
  • 66,99 € AUF AMAZON
LUCKFOX
LUCKFOX
LUCKFOX 7.5-inch e-Paper with PCB, Waveshare 800 x 480 Pixel Screen, Features Low Power Consumption, 170°Wide Viewing Angle, Clear Display, for Raspberry/Jetson Nano/Nucleo, for Device Labels, etc
star

95

TOP QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#3

  • No backlight is required, and the display content of the last screen can be kept for a long time after power failure. Very low power consumption, which is only used when refreshing
  • Based on Pi 40PIN GPIO interface, compatible with Raspberry Pi series motherboards/Jetson Nano
  • Reserved SPI control interface, compatible with Raspberry Pi/Jetson Nano/Orduino/STM32 main control board, etc
  • The on-board level conversion chip can be compatible with 3.3V and 5V MCU interfaces. Provide complete examples for Raspberry Pi/Jetson Nano/Orduino/STM32. Please ask 24-hour customer service for relevant examples
  • Applicable to price tags, asset equipment tags, electronic shelf tags, conference nameplates, etc
  • 63,99 € AUF AMAZON
Waveshare
Waveshare
Waveshare 7.5inch E-Paper HAT, 800×480 Resolution, Supports Red/Black/White 3Colors, for Price Tags, Shelf Labels, Industrial Instruments, etc
star

92

TOP QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#4

  • No need for backlight, can keep the last screen display for a long time after disconnecting the power
  • Very low power consumption, basically only consumes power during refresh
  • SPI control interface, which can be connected to main control boards such as Raspberry Pi/Jetson Nano/STM32
  • Onboard level conversion chip, for 3.3V and 5V microcontroller interface
  • Provide complete supporting information manual (driver board schematic diagram, example program for Raspberry Pi/Jetson Nano/STM32)
  • 72,99 € AUF AMAZON
Waveshare
Waveshare
Waveshare 7.5inch E-Paper Display HAT (B) Module 800x480 Resolution 3.3v E-Ink Electronic Screen SPI Interface Red Black White Three-Color for Raspberry Pi Jetson Nano
star

82

SICHERE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#5

  • No backlight, keeps displaying last content for a long time even when power down.
  • Ultra low power consumption, basically power is only required for refreshing. Wide Viewing Angle, Paper-Like Displaying Without Electricity.
  • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano.
  • SPI interface, for connecting with controller boards like Raspberry Pi/Jetson Nano/STM32, etc. Onboard voltage translator, compatible with 3.3V / 5V MCUs.
  • Suitable For Price Tags, Asset/Equipment Tags, Shelf Labels, Conference Name Tags.
  • 72,99 € AUF AMAZON
Waveshare
Waveshare
Waveshare 7.5inch E-Paper HAT Display Module, 800×480 Resolution, Supports Black/White 2 Colors, Compatible with Jetson Nano/Raspberry Pi 4B/3B+/3A+/3B/2B/1B+/1A+/Zero 2 W/Zero W/Zero
star

81

GUTE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#6

  • This product has been updated to V2 with 800 x 480 resolution (the V1 has a resolution of 640 x 384). The hardware structure and interface of V2 are for the V1, but the software needs to be updated. If you purchase it for the first time, and there is a V2 label on the back of the screen, you can directly use the program for V2.
  • This is an E-Ink display HAT for Raspberry Pi, 7.5inch, 800×480 resolution, with embedded controller, communicating via SPI interface. Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.
  • No backlight, keeps displaying last content for a long time even when power down. Ultra low power consumption, basically power is only required for refreshing.
  • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano. SPI interface, for connecting with other controller boards like Raspberry/Nucleo, etc. Onboard voltage translator, for 3.3V/5V MCUs.
  • Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/STM32).
  • 69,99 € AUF AMAZON
Waveshare
Waveshare
7.5inch E-Paper Display HAT Module 800×480 E-Ink Electronic Paper Screen for Raspberry Pi/Jetson Nano SPI Interface with ESP32 Driver Board(WiFi/Bluetooth)
star

80

GUTE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#7

  • No backlight, keeps displaying last content for a long time even when power down
  • Ultra low power consumption, basically power is only required for refreshing
  • Universal e-Paper Driver Board with WiFi / Bluetooth SoC ESP32 onboard, supports various Waveshare SPI e-Paper raw panels
  • Supports Floyd-Steinberg dithering algorithm, more color combinations, better shadow rendering for the original image; supports popular image formats: BMP, JPEG, GIF, PNG, etc
  • Development Resources: www.waveshare.com/wiki/7.5inch_e-Paper_HAT; www.waveshare.com/wiki/e-Paper_ESP32_Driver_Board
  • 72,50 € AUF AMAZON
Waveshare
Waveshare
Waveshare 7.5inch E-Paper Raw Display Panel (B) 800x480 Resolution E-Ink Electronic Paper Screen Without PCB Support Red Black and White Three-Color and White SPI Interface
star

75

GUTE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#8

  • INTERFACE:3-wire SPI, 4-wire SPI; OUTLINE DIMENSIONS:170.2 × 111.2 × 1.18mm; FULL REFRESH TIME:26s; DISPLAY SIZE:163.2 × 97.92mm ; DOT PITCH:0.205 × 0.204mm; VIEWING ANGLE:>170°.
  • Low power consumption, basically power is only required for refreshing.Wide viewing angle, paper-Like displaying without electricity
  • Suitable For Price Tags, Asset/Equipment Tags, Shelf Labels, Conference Name Tags,industrial instruments.
  • E-paper display utilizes microcapsule electrophoretic technology for displaying, the principle is: charged particles suspended in clear fluid will move to sides of microcapsule when electric field is applied, making the microcapsule become visible by reflecting ambient light, just as traditional printed paper.
  • E-paper display will clearly display images/texts under lamplight or natural light, requires no backlight, and features nearly up to 180° viewing angle. It is usually used as e-reader due to its paper-like effect.
  • 65,99 € AUF AMAZON
Waveshare
Waveshare
Waveshare 7.5inch e-Paper Display (H), e-Ink Display, 800x480, Red/Yellow/Black/White, SPI Interface, Without Driver Board, Raw Display Only
star

75

GUTE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#9

  • No Backlight, Persistent Display: The display does not require a backlight and retains the last content for an extended period, even after power is turned off.
  • Ultra Low Power Consumption: The display is extremely energy-efficient, with power being consumed only for refreshing the content, making it ideal for low-power applications.
  • Easy to Integrate: It comes with comprehensive online development resources and a manual, including e-Paper Driver HAT circuit diagrams and example code for Raspberry Pi, Jetson Nano, Arduino, and STM32.
  • Supports Multiple Platforms: The display is compatible with a wide range of platforms, thanks to the provided development examples and circuit diagrams, ensuring easy integration with popular hardware.
  • Efficient for Embedded Projects: With low power consumption and the ability to maintain static content without constant power, this display is well-suited for embedded systems and long-duration applications. Rich WiKi Resources: We provide official Wiki resources, please visit our store and click the wiki page to get resources.
  • 66,99 € AUF AMAZON
Coolwell
Coolwell
Coolwell 7.5 Inch E-Paper Display HAT Module 800x480 E-Ink Three-Color Paper Screen for Raspberry Pi/Jetson Nano/Arduino SPI Interface with WiFi/Bluetooth ESP32 Driver Board
star

68

GUTE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#10

  • Three color 7.5 inch epaper display, no backlight, keeps displaying last content for a long time even when power down
  • 7.5 eink module, ultra low power consumption, basically power is only required for refreshing
  • Onboard ESP32, supports Arduino development; Provides Android APP, allows to refresh display content via Bluetooth EDR
  • Supports Floyd-Steinberg dithering algorithm, more color combinations, better shadow rendering for the original image; supports popular image formats: BMP, JPEG, GIF, PNG, etc
  • Development Resources: www.waveshare.com/wiki/7.5inch_e-Paper_HAT_(B); www.waveshare.com/wiki/e-Paper_ESP32_Driver_Board
  • 72,50 € AUF AMAZON
waveshare 7.5inch e paper waveshare 7.5inch e-paper display waveshare e-paper 2.7 waveshare e-paper 7.5 waveshare 7.5inch e-paper raw panel case waveshare 7.5inch e-ink display e-paper waveshare waveshare e paper waveshare e-paper waveshare 7.5 inch e-paper