Waveshare 5g Antenna
Die 10 besten Produkte von Dezember 2025
Letzte Aktualisierung:
23. Dezember 2025
Waveshare
Waveshare 5G High Gain Omni Antenna Compatible with 5G/4G/3G/GNSS, SMA to IPEX-4 Connector Suitable for 5G Communication Modules
99
MAXIMALE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#1 GEWINNER
▼ Mehr anzeigen
▲ Weniger anzeigen
Network support: 5G/4G/3G/GNSS ; Output impedance (Ω): 50
Frequency band (MHz): 600~6000MHz; Connector: SMA needle inside
gain (dBi): 18dBi; Connection wire: SMA to IPEX-4
SWR: < 3.0; Dimensions (mm): 220 × 24
Polarization: Linear; connector inner diameter (mm): 6
11,99 € AUF AMAZON
Waveshare
Waveshare Compatible Antenna for Raspberry Pi Compute Module 4/5, Supports 2.4G/5G WiFi Frequency Band, External Antenna for CM4/CM5/ESP32, with SMA Male Central Pin Connector
96
BESTE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#2
▼ Mehr anzeigen
▲ Weniger anzeigen
FREQUENCY RANGE: 2400-2500/5150-5850 MHz; RADIATION: Omnidirectional
BANDWIDTH: 100–700 MHz; CONNECTOR: SMA male central pin
VSWR: ≤1.92; POLARISATION: Vertical
PEAK GAIN: 2±0.5 dBi; Antenna DIMENSIONS: 109 × 10 mm
OUTPUT IMPEDANCE: 50 Ω; MAXIMUM POWER: 10 W
9,99 € AUF AMAZON
Waveshare
Waveshare PCIe to M.2 4G/5G and USB 3.2 HAT, Compatible with Raspberry Pi 5 Cellular Modem and SIMCom/Quectel 4G/5G LTE Modules, Comes with 5G-4IN1-PCB Antenna, High-Speed Networking
94
TOP QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#3
▼ Mehr anzeigen
▲ Weniger anzeigen
✅Designed for Raspberry Pi 5, HAT+ standard design with onboard I2C EEPROM, and supports Raspberry Pi 40PIN GPIO stackable expansion. Extends 3x high-speed USB 3.2 Gen1 ports for connecting more peripherals
✅Onboard M.2(NGFF) Key B slot, supports SIM7600XX-M.2, SIM82XX and RM5XX series 4G/5G modules and is compatible with 3042/3052 packages. Onboard Type-C port for connecting to a PC for 4G/5G networking, debugging and firmware updating, or external power supply input
✅Onboard power monitoring chip for real-time measurement of voltage, current and power. Onboard SIM card slot for NANO-SIM card
✅Onboard Reset button, Power and Network indicators for easy debugging and monitoring the operating status. Comes with customized 5G-4IN1-PCB Antenna for neat wiring management, supports top or bottom installation. Reserved airflow vent and mounting holes for cooling fan to increase airflow and provide better heat dissipation
✅The 4G/5G module is NOT included, please purchase separately according to your needs. Comes with 5G-4IN1-PCB antenna by default, if you need an external 5G antenna for outdoor testing, you can choose 5G/4G/3G/2G External Antenna or 5G/4G/3G/GNSS External Antenna.
49,99 € AUF AMAZON
Waveshare
Waveshare Wireless AX210 NIC, Gigabit Tri-Band Wi-Fi 6E, 802.11AX Standard, BT 5.3, Comes with IPEX to SMA 20cm Cable and 17cm 2.4/5G 6DB SMA Antenna
88
HOHE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#4
▼ Mehr anzeigen
▲ Weniger anzeigen
Adopts sixth-generation 802.11AX Wi-Fi standard, provides better performance and compatibility than the previous generation 802.11AC, lower power consumption and longer service life
Supports 2.4G/5G/6GHz tri-band, the speed up to 574Mbps in the 2.4GHz band and 2400Mbps in the 5GHz/6GHz band
Longer transmission distance and better stability
Adopts the new generation of MU-MIMO wireless technology, provides better network quality, faster Internet speed (more than three times), and higher transmission and download efficiency
Adopts NGFF (M.2 A/E Key) interface. Support Linux, Windows 10/8.1/8/7, etc.
25,99 € AUF AMAZON
TUOLNK
TUOLNK IPX auf SMA Kabel SMA Buchse auf U.FL IPX RG178 Koaxialkabel für GPS Modul Mini PCI UFL Wifi Antennenverlängerungskabel 4inch (10cm) 5pcs
86
SICHERE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#5
▼ Mehr anzeigen
▲ Weniger anzeigen
Kabeltyp und Details: SMA auf IPX Koaxialkabel; Kabeltyp: Koax RG178; Steckermaterial: reines Kupfer; Kabellänge: 4 Zoll (10 cm); Impedanz: 50 Ohm
Haltbarkeit und Leistung: Der Stecker ist aus reinem Messing, um seine Haltbarkeit und Recyclingfähigkeit zu gewährleisten. Das Kabelmaterial ist RG178, um eine gute Leitfähigkeit und Signalübertragung zu gewährleisten
Anwendung: Dieses Produkt wird häufig in Antennenanwendungen, Lora Modulen, Mini PCI, Bluetooth Modulen, WLAN Funkgeräten, GPS Modulen, WLAN USB usw. verwendet
Lieferumfang: 5 Stück SMA Buchse auf IPX Koaxialkabel (Anschluss 1: SMA Buchse, Anschluss 2: IPX Anschluss, Kabeltyp: RG178 Koaxialkabel)
Einfache Installation: Das benutzerfreundliche Design des TUOLNK Koaxialkabels spart Zeit und Mühe, und der Installationsvorgang erfordert kein Werkzeug, Plug and Play. Verabschieden Sie sich von komplexen Installationen und sorgen Sie für reibungslose und zuverlässige Verbindungen für Ihre Anforderungen
10,99 € AUF AMAZON
Waveshare
Waveshare Antenne für Raspberry Pi Compute Module 4 CM4 Antenne Unterstützt 2.4G/5G WiFi Frequenzband, 100-700MHz Bandbreite
80
GUTE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#6
▼ Mehr anzeigen
▲ Weniger anzeigen
Compatible Antenna for Compute Module 4, frequency range 2400-2500/5100-5800 MHz, Supports 2.4G/5G WiFi
Bandwidth: 100–700MHz
Radiation: Omnidirectional
Maximum power: 10W
Antenna dimensions: 108 mm × 10 mm
8,99 € AUF AMAZON
Waveshare
Waveshare Compute Module 4 Antenna Kit Certified for Use with Raspberry Pi Compute Module 4 Supports 2.4G/5G WiFi Frequency Band
78
GUTE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#7
▼ Mehr anzeigen
▲ Weniger anzeigen
The Raspberry Pi Compute Module 4 Antenna Kit has undergone extensive compliance testing and meets the standards required in many countries. You can find all compliance information and regional certificates at raspberrypi.org/compliance.
This Antenna Kit is certified for use with Raspberry Pi Compute Module 4. If a different antenna is used, then separate certification will be required, and this must be arranged by the end-product design engineer.
Frequency range: 2400-2500/5100-5800 MHz; Bandwidth: 100–700MHz; VSWR: ≤ 2.0
Gain: 2 dBi; Impedance: 50 ohm; Polarisation: Vertical
Radiation: Omnidirectional; Maximum power: 10W; Antenna dimensions: 108 mm × 10 mm
15,99 € AUF AMAZON
Waveshare
Waveshare GPS External Antenna Ceramics with Amplifier (Include IPX to SMA Adapter Wire)
76
GUTE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#8
▼ Mehr anzeigen
▲ Weniger anzeigen
This item includes * IPX to SMA Adapter Wire
CABLE MATERIAL: RG174 96-weave copper with tin coating
VIBRATION: 10 to 55Hz with 1.5mm amplitude 2hours
CENTER FREQUENCY: 1575±1MHz
EX-BAND ATTENUATION: 35dB@CF±50MHz/50dB@CF±100MHz
12,99 € AUF AMAZON
Waveshare
Waveshare RM520N-GL 5G HAT with Case,Compatible with Raspberry Pi/Windows 7/8/10/11, Quad Antennas LTE-A, Global Band, GNSS Positioning, Support 3GPP 16, 4G/3G
72
GUTE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#9
▼ Mehr anzeigen
▲ Weniger anzeigen
Mit dem Quectel RM520N-GL 5G Sub-6 GHz Modul, unterstützt verschiedene Netzwerkstandards wie 5G/4G/3G und LTE-A, GNSS-Positionierungsunterstützung. Mit M.2 TO 4G/5G HAT, kompatibel mit RM500U-CN/RM500Q-GL/RM502Q-AE/RM520N-GL Serie 5G-Module
USB 3.1 Port (USB 2.0 kompatibel) für den Anschluss an PC, Raspberry Pi oder Jetson Nano für High-Speed 5G-Netzwerk. Standard M.2 B Key-Slot, kompatibel mit SIM7600X/EM06X/SIM82XX/RM5XX Serie 4G/5G M.2 Module
Onboard control pins built-in voltage level translator, enable via DIP switch, for Raspberry Pi. Onboard-USB-C-Anschluss, über Switch kompatibel, für den Standalone-Anschluss an die Stromversorgung des Moduls, für mehr Loads, stabile und flexible Stromversorgung
Onboard Power supply switch, reset button and LED indicator, easy to turn on/off the module and monitor the operating status. 2 x SIM-Kartenschlitz, Dual-Karten-Single-Standby, schaltbar über AT
Hocheffiziente Stromversorgung, bis zu 3 A Ausgangsstrom. Mit Metallgehäuse, Wand- und Schienenhalterung, die für die Installation geeignet ist
325,99 € AUF AMAZON
NETGEAR
Netgear 6000451 Externe 5G MIMO SMA-/TS9-Antenne (bis zu 2,5 dBi Signalverstärkung für 5G/4G Mobile Hotspots und LTE Router, 4G/5G Antenne, Kabellänge 100 cm mit 2X TS-9 oder SMA-Anschlüssen)
64
GUTE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#10
▼ Mehr anzeigen
▲ Weniger anzeigen
Externe Antenne verbessert den Empfang und die Abdeckung in Gebäuden,Fahrzeugen oder entfernten Standorten mit geringer oder schwacher Netzabdeckung
Externe TS9-Antenne für besseren Netz-Empfang für fixe und mobile Hotspots und 5G/4G Router mit zwei TS--9 oder SMA-Anschlüssen (wie z.B. Netgear MR5200, MR2100, MR1100)
Sehr flaches Design und einfache Installation ohne Softwarekonfiguration
MIMO-Flachantenne unterstützt folgende Frequenzbänder:GSM/EDGE/UMTS/HSPA/HSPA+ DC/CDMA/EV-DO/WIMAX/LTE/5G 600- 960/1710-5925 MHz
Beide SMA-Anschlüsse und TS-9-Konverter ermöglichen Anschluß an viele Modelle von stationären (LAX20,LBR20, NBK752) oder mobilen Routern(MR5200, MR2100, MR1100, MR6150 , MR6450), auch mit anderen Herstellern kompatibel
Inkl. Saugnäpfen und Haken zum Anbringen an Fenstern oder geraden Flächen sowie Laptops oder sonstigen Kanten kompatibel mit vielen NETGEAR USB-Modems und mobilen Hotspots
Lieferumfang:Netgear MIMO 6000451 3G/4G/5G Hochleistung-Antenne, Kabellänge 1m, 2xSMA-Steckverbinder mit 2x TS-9 Konvertern, 2x Saugnäpfe,2x Haken
47,90 € AUF AMAZON
5g antenna
antenna 5g
waveshare 5g
5g external antenna
external 5g antenna
5g antenna outdoor
5g outdoor antenna
5g omnidirectional antenna
antenna 5g ts9
5g lte antenna