main logo

Waveshare 3.7

Die 10 besten Produkte von Juli 2025
Letzte Aktualisierung: 9. Juli 2025
Waveshare
Waveshare
Waveshare 3.7inch E-Paper E-Ink Display Module for Raspberry Pi Pico 480×280 Pixels Black/White SPI Interface Partial Refresh Support
Kostenloser Versand
star

99

MAXIMALE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#1 GEWINNER

  • RESOLUTION:480×280 pixels,OPERATING VOLTAGE 3.3V/5V,GREY SCALE:4,FULL REFRESH TIME:3s,PARTIAL REFRESH TIME:0.3s
  • No backlight, keeps displaying last content for a long time even when power down.Ultra low power consumption, basically power is only required for refreshing
  • SPI interface, requires minimal IO pins. Onboard voltage translator, compatible with 3.3V / 5V MCUs
  • Comes with development resources and manual (Raspberry Pi Pico C/C++ and MicroPython examples)
  • Suitable For Price Tags, Asset/Equipment Tags, Shelf Labels, Conference Name Tags...
  • 40,99 € AUF AMAZON
Waveshare
Waveshare
Waveshare 3.7inch E-Paper E-Ink Raw Display with 480×280 Pixels Black/White 4 Grey Scales SPI Interface Without PCB
star

96

BESTE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#2

  • Partial Refresh Support, Low Power, Wide Viewing Angle, Paper-Like Effect
  • No backlight, keeps displaying last content for a long time even when power down
  • Ultra low power consumption, basically power is only required for refreshing
  • Comes with development resources and manual in wiki (driver board circuit diagram, examples for Raspberry Pi/Jetson Nano/Arduino/STM32)
  • Ideal for price tags, shelf labels, industrial instruments…
  • 30,99 € AUF AMAZON
Waveshare
Waveshare
Waveshare 3.7inch E-Paper E-Ink Display HAT for Raspberry Pi with 480×280 Pixels Black/White 4 Grey Scales SPI Interface
Kostenloser Versand
star

93

TOP QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#3

  • No backlight, keeps displaying last content for a long time even when power down
  • Ultra low power consumption, basically power is only required for refreshing
  • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano
  • SPI interface, for connecting with controller boards like Raspberry Pi/Jetson Nano/Arduino/STM32, etc. Onboard voltage translator, compatible with 3.3V / 5V MCUs
  • Comes with development resources and manual (driver board circuit diagram, examples for Raspberry Pi/Jetson Nano/Arduino/STM32)
  • 41,99 € AUF AMAZON
Waveshare
Waveshare
Waveshare 3.7inch E-Paper Raw Display, E-Ink Display, 416 × 240 Pixels, Red/Yellow/Black/White, SPI Interface, Standard Raspberry Pi 40PIN GPIO Header, Without Driver
star

90

HOHE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#4

  • Compact e-Paper Display: The 3.7-inch e-paper screen offers a resolution of 480x280 pixels, providing clear and crisp text and images with high contrast and low power consumption.
  • Versatile Use: Ideal for applications like electronic shelf labels, digital signage, and information displays, it supports grayscale and can hold images without requiring constant power, making it perfect for energy-efficient projects.
  • SPI Interface: The e-Paper HAT Plus G utilizes a 3-wire SPI interface, making it compatible with devices such as Raspberry Pi, Jetson Nano, and other microcontrollers, allowing easy integration.
  • Low Power: One of the main advantages of this display is its ultra-low power consumption, which significantly reduces energy usage, especially in battery-powered devices.
  • Wide Compatibility: Compatible with both Windows 10/11 and Linux operating systems, ensuring smooth integration with different platforms for personal and professional use. Rich WiKi Resources: We provide official Wiki resources, please contact us for more information.
  • 20,99 € AUF AMAZON
Waveshare
Waveshare
Waveshare 3.7inch E-Paper Display, E-Ink Display with Driver Board, 416 × 240 Pixels, Red/Yellow/Black/White, SPI Interface, Standard Raspberry Pi 40PIN GPIO Header
star

83

SICHERE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#5

  • Compact e-Paper Display: The 3.7-inch e-paper screen offers a resolution of 480x280 pixels, providing clear and crisp text and images with high contrast and low power consumption.
  • Versatile Use: Ideal for applications like electronic shelf labels, digital signage, and information displays, it supports grayscale and can hold images without requiring constant power, making it perfect for energy-efficient projects.
  • SPI Interface: The e-Paper HAT Plus G utilizes a 3-wire SPI interface, making it compatible with devices such as Raspberry Pi, Jetson Nano, and other microcontrollers, allowing easy integration.
  • Low Power: One of the main advantages of this display is its ultra-low power consumption, which significantly reduces energy usage, especially in battery-powered devices.
  • Wide Compatibility: Compatible with both Windows 10/11 and Linux operating systems, ensuring smooth integration with different platforms for personal and professional use. Rich WiKi Resources: We provide official Wiki resources, please contact us for more information.
  • 32,99 € AUF AMAZON
Waveshare
Waveshare
waveshare ESP32-S3 3,7 cm Display-Entwicklungsplatine, 172 × 320 Auflösung, 262 K Farb-RGB-LED, unterstützt mehrere Peripheriegeräte
star

82

SICHERE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#6

  • ESP32-S3-LCD-1.47, integriert LCD-Display, integrierten TF-Kartensteckplatz und mehrere Peripherieschnittstellen
  • ESP32-S3-LCD-1.47 ist eine Mikrocontroller-Entwicklungsplatine mit 2,4 GHz WiFi und Bluetooth BLE 5 Unterstützung
  • Integriert Flash und PSRAM mit hoher Kapazität.
  • Der integrierte 1,44-Zoll-LCD-Bildschirm kann problemlos GUI-Programme wie LVGL ausführen
  • Kombiniert mit verschiedenen Peripherieschnittstellen, geeignet für die schnelle Entwicklung des HMI und anderer ESP32-S3-Anwendungen.
  • 28,26 € AUF AMAZON
Waveshare
Waveshare
Waveshare ESP32-S3 1.8inch AMOLED Touch Display Development Board, 32-Bit LX7 Dual-Core Processor, 368x448, Accelerometer&Gyroscope Sensor, ESP32 with Display, Support 3.7V Li Battery(NOT Included)
Kostenloser Versand
star

78

GUTE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#7

  • Equipped with ESP32-S3R8 Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency. Supports 2.4GHz Wi-Fi (802.11 b/g/n) and Bluetooth 5 (LE), with onboard antenna. Built in 512KB of SRAM and 384KB ROM, with onboard 8MB PSRAM and an external 16MB Flash memory. Type-C connector, improving device compatibility, easier to use
  • Onboard 1.8inch AMOLED display for clear color picture display, 368 x 448 resolution, 16.7M color. Built-in SH8601 display driver and FT3168 capacitive touch chip, using QSPI and I2C communication respectively, effectively saving the IO resources. Onboard PWR and BOOT programmable buttons for easy custom function development
  • Onboard QMI8658 6-axis IMU (3-axis accelerometer and 3-axis gyroscope) for detecting motion gesture, counting steps, etc. Onboard PCF85063 RTC chip, powered by main Lithium battery through AXP2101 chip, with reserved RTC battery pads for connecting a backup battery, ensuring RTC function during the replacement of the main battery. Onboard 3.7V MX1.25 Lithium battery recharge/discharge header, Support 3.7V Lithium battery(NOT Included)
  • Reserved pads of 7 x GPIO, 1 x I2C, 1 x UART, and 1 x USB interface, for connecting peripherals and debugging. Onboard TF card slot for extended storage and fast data transfer, suitable for applications such as data recording and media playback, simplifying circuit design
  • Adopts AXP2101 IC for efficient power management, supports multiple voltage outputs, battery charging, battery management, and battery life optimization, etc. Adopts AMOLED screen, featuring advantages of high contrast, wide viewing angle, rich colors, fast response, thinner design, and low power consumption, etc
  • 41,99 € AUF AMAZON
Waveshare
Waveshare
Waveshare ESP32-S3 1.85inch Round LCD Development Board, 360x360, Supports Wi-Fi & BT BLE 5, AI Speech, ESP32 with Display with Smart Speaker Box(3.7V Lithium Battery not Included)
Kostenloser Versand
star

75

GUTE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#8

  • ESP32-S3-Touch-LCD-1.85C-BOX-EN is a microcontroller development board with Smart Speaker Box(3.7V Lithium battery not included) with 2.4GHz Wi-Fi and BT BLE 5 support, integrates high-capacity Flash and PStatic RAM
  • Onboard 1.85inch LCD display which can smoothly run GUI programs such as LVGL. Combined with various peripheral interfaces, it is suitable for the quick development of the HMI and other ESP32-S3 applications.
  • Equipped with high-performance Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency. Supports 2.4GHz Wi-Fi (802.11 b/g/n) and BT 5 (LE), with onboard antenna
  • Built-in 512KB Static RAM and 384KB ROM, with onboard 16MB Flash and 8MB PStatic RAM. Onboard 1.85inch LCD display, 360x360 resolution, 262K color. Supports capacitive touch controlled via I2C interface, with interrupt support
  • Adapting UART, I2C and some IO interfaces. Onboard audio decoder, Microphone, RTC sensor, TF card slot and battery recharge management module, etc. Supports accurate control such as flexible clock and multiple power modes to realize low power consumption in different scenarios
  • 47,99 € AUF AMAZON
Waveshare
Waveshare
Waveshare ESP32-S3 1.8inch AMOLED Touch Display Development Board, 32-Bit LX7 Dual-Core Processor, 368x448, Accelerometer&Gyroscope Sensor, ESP32 with Display, Support 3.7V Li Battery(Included)
star

73

GUTE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#9

  • Equipped with ESP32-S3R8 Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency. Supports 2.4GHz Wi-Fi (802.11 b/g/n) and Bluetooth 5 (LE), with onboard antenna. Built in 512KB of SRAM and 384KB ROM, with onboard 8MB PSRAM and an external 16MB Flash memory. Type-C connector, improving device compatibility, easier to use
  • Onboard 1.8inch AMOLED display for clear color picture display, 368 x 448 resolution, 16.7M color. Built-in SH8601 display driver and FT3168 capacitive touch chip, using QSPI and I2C communication respectively, effectively saving the IO resources. Onboard PWR and BOOT programmable buttons for easy custom function development
  • Onboard QMI8658 6-axis IMU (3-axis accelerometer and 3-axis gyroscope) for detecting motion gesture, counting steps, etc. Onboard PCF85063 RTC chip, powered by main Lithium battery through AXP2101 chip, with reserved RTC battery pads for connecting a backup battery, ensuring RTC function during the replacement of the main battery. Onboard 3.7V MX1.25 Lithium battery recharge/discharge header, Support 3.7V Lithium battery(Included)
  • Reserved pads of 7 x GPIO, 1 x I2C, 1 x UART, and 1 x USB interface, for connecting peripherals and debugging. Onboard TF card slot for extended storage and fast data transfer, suitable for applications such as data recording and media playback, simplifying circuit design
  • Adopts AXP2101 IC for efficient power management, supports multiple voltage outputs, battery charging, battery management, and battery life optimization, etc. Adopts AMOLED screen, featuring advantages of high contrast, wide viewing angle, rich colors, fast response, thinner design, and low power consumption, etc
  • 43,99 € AUF AMAZON
Waveshare
Waveshare
Waveshare RP2350 1.8inch AMOLED Touch Display Development Board, 368x448, QSPI Interface, Dual-Core & Dual-Architecture, Accelerometer & Gyroscope Sensor, Support 3.7V MX1.25 Li Battery(NOT Included)
Kostenloser Versand
star

69

GUTE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#10

  • RP2350A microcontroller chip designed by Raspberry Pi. Adopts unique dual-core and dual-architecture design: dual ARM Cortex-M33 or dual Hazard3 RISC-V processors support, flexible clock running up to 150 MHz. 520KB of Static RAM, and 16MB onboard Flash memory
  • Type-C connector for easier use. Onboard 1.8inch AMOLED display for clear color picture display, 368x448 resolution, 16.7M color. Built-in SH8601 display driver and FT3168 capacitive touch chip, using QSPI and I2C communication respectively
  • Li battery recharge/discharge header support 3.7V MX1.25 Li battery(battery NOT Included), suitable for mobile applications. USB 1.1 with device and host support. Low-power sleep and dormant modes
  • Drag-and-drop programming using mass storage over USB. Adapting 5xmulti-function GPIO pins. 2xI2C, 1xUART, 1x12-bit ADC, 5xcontrollable PWM channels. Accurate clock and timer on-chip
  • Temperature sensor. Accelerated floating-point libraries on-chip. 12xProgrammable I/O (PIO) state machines for custom peripheral support
  • 35,99 € AUF AMAZON
waveshare 7 3/7 7/3 emsa 3,7 majirel 7.3 excellence 7.3 waveshare 7 inch dialight 7.3 preference 7.3 wallbox 3 7