main logo

Sim7600g-h 4g Hat

Die 10 besten Produkte von Januar 2026
Letzte Aktualisierung: 10. Januar 2026
Waveshare
Waveshare
Waveshare 4G/3G/2G/GSM/GPRS/GNSS HAT for Raspberry Pi Jetson Nano Based on SIM7600G-H Supports LTE CAT4 up to 150Mbps for Downlink Data Transfer the Global Version Positioning Module
star

99

MAXIMALE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#1 GEWINNER

  • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano.
  • Supports dial-up, telephone call, SMS, , mail, TCP, UDP, DTMF, HTTP, FTP, etc. Supports GPS, BeiDou, Glonass, LBS base station positioning. Supports SIM application toolkit: SAT Class 3, GSM 11.14 Release 99, USAT.
  • Onboard USB interface, to test AT Commands, get GPS positioning data, and so on. Onboard CP2102 USB to UART converter, for serial debugging. Onboard audio jack and audio decoder for making telephone call. Onboard voltage translator, operating voltage can be configured to 3.3V or 5V via jumper.
  • Breakout UART control pins, to connect with host boards like Arduino/STM32. SIM card slot, supports 1.8V/3V SIM card. TF card slot for storing data like files, messages, etc. 2x LED indicators, easy to monitor the working status.
  • Baudrate: 300bps ~ 4Mbps (default: 115200bps). Autobauding baudrate: 9600bps ~ 115200bps. Control via AT commands (3GPP TS 27.007, 27.005, and V.25TER command set).
  • 96,99 € AUF AMAZON
Waveshare
Waveshare
Waveshare SIM7600G-H 4G HAT (B) for Raspberry Pi Supports LTE Cat-4 4G/3G/2G GNSS Positioning Global Band
star

97

BESTE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#2

  • 4G HAT FOR RASPBERRY PI,Enabling LTE Cat-4 4G / 3G / 2G Communication & GNSS Positioning,Based on SIM7600G-H, Global Band
  • Suitable For Raspberry Pi / PC,Dedicated Pogo Pin For Connecting With Raspberry Pi Zero/Zero W Without Extra USB Cable General Purpose MicroUSB Connector For Other Raspberry Pi Boards Or PC
  • Global Band 4G / 3G / 2G Support,Up To 50Mbps Uplink And 150Mbps Downlink For 4G Network
  • USB HUB Feature,Onboard USB HUB Chip With USB2.0/1.1 Compliant, Providing 2x USB-A Connector And 1x USB Solder Pad
  • GNSS Positioning,Supports GPS, BeiDou, Glonass, LBS Base Station Positioning; Telephoto Call & SMS Support,Making Telephoto Call Or Sending SMS By AT Commands, With Onboard Audio Jack
  • 96,99 € AUF AMAZON
Waveshare
Waveshare
Waveshare SIM7600G-H 4G HAT, Supports LTE Cat-4 4G/3G/2G, GNSS Positioning, Global Band, Compatible with Raspberry Pi 4B/3B+/3A+/3B/2B/1B+/1A+/Zero 2 W/Zero W/Zero/Jetson
star

96

BESTE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#3

  • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano.
  • Supports dial-up, telephone call, SMS, TCP, UDP, DTMF, HTTP, FTP, etc. Supports GPS, BeiDou, Glonass, GALILEO, QZSS, LBS base station positioning
  • Onboard USB interface, to test AT Commands, get GPS positioning data, and so on. Onboard USB to UART converter, for serial debugging
  • Onboard audio jack and audio decoder for making telephone call. 2x LED indicators, easy to monitor the operating status. Onboard voltage translator, operating voltage can be configured to 3.3V or 5V via jumper.
  • Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/STM32).
  • 96,99 € AUF AMAZON
Waveshare
Waveshare
Waveshare SIM7600G-H 4G HAT, Global Band, Enabling LTE Cat-4 4G / 3G / 2G Communication & GNSS Positioning, Compatible with Raspberry Pi and PC
star

91

HOHE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#4

  • Connected via pogo pin or MicroUSB connector. Dedicated pogo pin for Raspberry Pi Zero/Zero W. MicroUSB connector for other Raspberry Pi boards or PC.
  • Incorporates SIM7600G-H global band 4G module, for 2G/3G/4G network with global support. USB HUB connector for other Raspberry Pi boards or PC, providing USB extension and 4G network access.
  • Supports dial-up, telephone call, SMS, TCP, UDP, DTMF, HTTP, FTP, etc. Supports GPS, BeiDou, Glonass, GALILEO, QZSS, LBS base station positioning. SIM card slot, supports 1.8V/3V SIM card.
  • Onboard audio jack and audio decoder for making telephone call. 2x LED indicators, easy to monitor the operating status. Control via AT commands (3GPP TS 27.007, 27.005, and V.25TER command set).
  • Supports SIM application toolkit: SAT Class 3, GSM 11.14 Release 99, USAT. Comes with development resources and online user manual (examples for Raspberry Pi).
  • 96,99 € AUF AMAZON
Waveshare
Waveshare
Waveshare SIM7600G-H-PCIE SIMCom Original 4G LTE Cat-4 Module Support Global Coverage GNSS/LTE-TDD/LTE-FDD/HSPA+/GSM/GPRS/EDGE with Mini-PCIe Connector
star

87

SICHERE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#5

  • Mini-PCIE interface with strong compatibility
  • Multi-constellation GNSS receiver support
  • Suitable for LTE, UMTS and GSM networks with global coverage
  • Abundant software functions: FOTA, LBS, TLS, VoLTE
  • AT commands of the SIM7600-H-PCIE series are compatible with the SIM7500/SIM7600 series modules
  • 64,99 € AUF AMAZON
Waveshare
Waveshare
Waveshare SIM7600G-H M.2 4G Hat for Raspberry Pi LTE CAT4 High Speed Global Coverage Multi Band 4G/3G/2G Communication and GNSS Positioning
star

82

SICHERE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#6

  • Supports dial-up, phone call, SMS, TCP, UDP, MQTT, HTTP(S), FTP(S), and so on. GNSS positioning: GPS, Beidou, Glonass, Galileo, QZSS, LBS base station
  • USB 3.1 port (USB 2.0 compatible) for connecting to PC, Raspberry Pi, or Jetson Nano host board to enable high speed 4G communication. Onboard UART, PWR, and RST control pin, built-in voltage level translator, enabled via DIP switch, for use with hosts like Raspberry Pi or Aduino
  • Onboard USB-C connector, enabled via switch, for connecting standalone power supply for the module, allows more loads, stable amd flexible power supply
  • Onboard power supply on/off switch, reset button and LED indicator, easy to turn on/off the module or monitor the operating status. Reserved 4x SMA to IPEX antenna interfaces, with pre-soldered 2x connectors for easily using antennas, allows changing the SMA antenna position
  • Onboard audio jack and audio decoder, allows audio operation like making phone call. High efficiency power supply circuit, up to 3A output current
  • 107,99 € AUF AMAZON
Coolwell
Coolwell
SIM7600G-H 4G HAT (B) for Raspberry Pi Series Board, Enabling LTE Cat-4 4G / 3G / 2G Communication & GNSS Positioning, Global Band (SIM7600G-H-PCIE)
star

80

GUTE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#7

  • The SIM7600G-H-PCIE series is the LTE Cat 4 module which supports wireless communication modes of LTE-TDD/LTE-FDD/HSPA+/GSM/GPRS/EDGE etc.
  • It supports maximum 150Mbps downlink rate and 50Mbps uplink rate.
  • The SIM7600G-H-PCIE series adopts mini PCIE form factor and consists of a SIM7600-H series module and a mini PCIE adapter board.
  • AT commands are compatible with SIM7500/SIM7600 series modules.
  • 64,50 € AUF AMAZON
Waveshare
Waveshare
Waveshare 4G/3G/2G/GSM/GPRS/GNSS Hat for Raspberry Pi 4 Jetson Nano Based on SIM7600E-H Supports LTE CAT4 for Downlink Data Transfer
star

79

GUTE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#8

  • The SIM7600E-H 4G HAT is a 4G/3G/2G communication and GNSS positioning module, which supports LTE CAT4 up to 150Mbps for downlink data transfer. it is pretty low power consumption.
  • You can connect this 4G module with computer to surf the Internet, or attach it onto Raspberry Pi to enable functions like 4G high speed connection, wireless communication, making telephone call, sending SMS, global positioning, etc.
  • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano. Supports SIM application toolkit: SAT Class 3, GSM 11.14 Release 99, USAT.
  • Baudrate: 300bps ~ 4Mbps (default: 115200bps). Autobauding baudrate: 9600bps ~ 115200bps. Control via AT commands (3GPP TS 27.007, 27.005, and V.25TER command set).
  • Supports dial-up, telephone call, SMS , mail, TCP, UDP, DTMF, HTTP, FTP, etc. Supports GPS, BeiDou, Glonass, LBS base station positioning.
  • 85,99 € AUF AMAZON
Coolwell
Coolwell
SIM7600G-H M.2 4G HAT for Raspberry Pi/Jetson Nano, LTE CAT4 Global Band,High Speed, 4G/3G/2G Comunication, GNSS Positioning
star

77

GUTE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#9

  • USB 3.1 port (USB 2.0 compatible) for connecting to PC, Raspberry Pi, or Jetson Nano host board to enable high speed 4G communication
  • Supports dial-up, phone call, SMS, TCP, UDP, MQTT, HTTP(S), FTP(S), and so on; GNSS positioning: GPS, Beidou, Glonass, Galileo, QZSS, LBS base station
  • Onboard UART, PWR, and RST control pin, built-in voltage level translator, enabled via DIP switch, for use with hosts like Raspberry Pi or Ardui
  • Onboard USB-C connector, enabled via switch, for connecting standalone power supply for the module, allows more loads, stable amd flexible power supply
  • Onboard power supply on/off switch, reset button and LED indicator, easy to turn on/off the module or monitor the operating status
  • 88,50 € AUF AMAZON
LUCKFOX
LUCKFOX
LUCKFOX 4G HAT for Raspberry Pi, Based on Waveshare SIM7600E-H, Enabling LTE Cat-4 4G/3G/2G Communication & GNSS Positioning, Compatible with Raspberry Pi Series Boards/Jetson Nano
star

75

GUTE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#10

  • Equipped with standard Pi 40PIN GPIO expansion head, and compatible with Raspberry Pi series boards/Jetson Nano. Support dialing, telephone calling, SMS/TCP/UDP/DTMF/HTTP/FTP, etc
  • Support GPS/BeiDou/Glonass/GALILEO/QZSS/LBS base station positioning. The onboard USB interface is used to test AT commands, obtain GPS positioning data, etc. On board 2102 USB to UART converter for serial debugging. Disconnect the UART control pin for connecting STM32 and other motherboards
  • SIM card slot, supporting 1.8V/3V SIM card. TF card slot, used to store files, messages and other data. Car audio jack and audio decoder for making calls. 2 LED indicators, easy to monitor operation status
  • On board voltage converter, the working voltage can be configured as 3.3V or 5V through jumpers. Baudrate: 300bps ~ 4Mbps (default: 115200bps). Autobauding baudrate: 9600bps ~ 115200bps. Control via AT command (3GPP TS 27.007, 27.005 and V.25TER command set)
  • Support SIM application kit: SAT Class 3, GSM 11.14 Release 99, USAT. Provide online development resources and manuals (examples for Raspberry Pi/Jetson Nano/STM32). Please ask 24-hour customer service for relevant manual
  • 75,99 € AUF AMAZON
waveshare sim7600g-h 4g hat sim7600g-h 4g hat b sim7600g-h 4g module sim7600g-h m.2 4g hat sim7600g-h sim7600e-h 4g hat