main logo

Rpi5 Poe

Die 10 besten Produkte von Dezember 2025
Letzte Aktualisierung: 15. Dezember 2025
Waveshare
Waveshare
Waveshare PoE HAT (G), Compatible with Raspberry Pi 5, 5V 5A Output, Stable Performance, Supports 802.3af/at Network Standard, Power Over Ethernet HAT (G), Suitable for RPi 5 Official Case
star

99

MAXIMALE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#1 GEWINNER

  • ✅Power Over Ethernet HAT For Raspberry Pi 5, Supports IEEE 802.3af/at Network Standard, 5V 5A Output, Compatible With Raspberry Pi 5 Official Case
  • ✅Standard Raspberry Pi 40PIN GPIO header. PoE capability，IEEE 802.3af/at-compliant
  • ✅By using with a PoE router or switch that supports the IEEE 802.3af/at network standard, it is possible to provide both network connection and power supply for your Raspberry Pi in only one Ethernet cable.
  • ✅Onboard original IC solution for more stable PoE power performance
  • ✅Adopts non-isolated switched-mode power supply (SMPS). Compact and easy to assemble
  • 26,99 € AUF AMAZON
GeeekPi
GeeekPi
GeeekPi P33 M.2 NVME M-Key PoE+ Hat für Raspberry Pi 5, mit offiziellem Raspberry Pi 5 Active Cooler, Unterstützung M.2 NVMe SSD 2230 2242 2260 2280
star

96

BESTE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#2

  • Kompatibilität: Dieses Set enthält einen P33 M.2 NVME M-Key PoE+ HAT und einen offiziellen Raspberry Pi Active Cooler, der speziell für das neueste Raspberry Pi 5-Modell entwickelt wurde, um optimale Leistung und Kompatibilität zu gewährleisten. für P33 mit Aluminium Case Kit, ASIN: B0DMW98LBR
  • Unterstützung für Hochgeschwindigkeits-NVMe-SSDs: Die HAT-Platine unterstützt M.2-NVMe-SSDs für blitzschnellen Datenzugriff und -speicherung
  • M.2-Schnittstelle: Nutzen Sie die PCIe-Schnittstelle für Hochleistungskommunikation zwischen SSD und Raspberry Pi.
  • PoE HAT Design: Vereinfachen Sie die Stromversorgung mit Power over Ethernet, eliminieren Sie die Notwendigkeit für zusätzliche Stromkabel.
  • Stromeingang: Ethernet (PoE+) 802.3at-Protokoll, bis zu 25,5 W
  • 39,99 € AUF AMAZON
Waveshare
Waveshare
POE HAT (F) for Raspberry Pi 5, 802.3af/at-Compliant, Power Over Ethernet HAT Expansion Board for Raspberry Pi 5, with Metal Heatsink,Onboard Cooling Fan
star

92

TOP QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#3

  • POE HAT with standard Raspberry Pi 40PIN GPIO header, compatible with Raspberry Pi 5
  • By using this small HAT and some proper 802.3af/at-compliant power sourcing equipments, it is possible to provide both network connection and power supply for your Raspberry Pi in only one Ethernet cable.
  • PoE (Power Over Ethernet) capability，IEEE 802.3af/at-compliant.x
  • Fully isolated switched-mode power supply (SMPS)
  • Onboard high speed active cooling fan, with metal heatsink, better heat dissipation
  • 29,75 € AUF AMAZON
Waveshare
Waveshare
Waveshare PoE Power Over Ethernet HAT (F) Compatibele with Raspberry Pi 5 / cm 5, High Power, Onboard Cooling Fan, with Metal Heatsink, Supports 802.3af/at Network Standard
star

89

HOHE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#4

  • The PoE HAT (F) is a 802.3af/at-compliant Power Over Ethernet accessory for the Raspberry Pi 5. By using this small HAT and some proper 802.3af/at-compliant power sourcing equipments, it is possible to provide both network connection and power supply for your Raspberry Pi in only one Ethernet cable.
  • Standard Raspberry Pi 40PIN GPIO header, supports Raspberry Pi 5 / CM 5
  • PoE (Power Over Ethernet) capability，IEEE 802.3af/at-compliant Fully isolated switched-mode power supply (SMPS)
  • Onboard high speed active cooling fan, with metal heatsink, better heat dissipation
  • Provide e-user manual, please check the manual carefully before using!
  • 30,99 € AUF AMAZON
DSLRKIT
DSLRKIT
DSLRKIT Power Over Ethernet PoE HAT IEEE802.3af DC 5V 4.5A for Raspberry Pi 5 RPi5 Pi5
star

86

SICHERE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#5
DSLRKIT
DSLRKIT
DSLRKIT 5V 4A Gigabit USB Type C Active PoE Splitter for for Raspberry Pi 5 RPi5 4B
star

82

SICHERE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#6

  • The POE splitter must be connected to the POE switch, POE midspan or 48V~52V POE injector for proper operation
  • Output power Max.12Watt (DC5V2.5A) when used with the IEEE802.3af standard PoE switch(or 802.3af PoE injector)
  • Output power Max.20Watt (DC5V4A) when used with the IEEE802.3at standard PoE switch (or 802.3at PoE injector)
  • Output power Max.20Watt (DC5V4A) when used with the DSLRKIT Non-standard 48V~52V Passive PoE switches (or 48V~52V Passive PoE injector)
  • The PoE Splitter supports the automatic Power on function for RPi5, without the need to press the power button of RPi5. There is a demonstration in the product video
  • 16,50 € AUF AMAZON
ZDE
ZDE
ZDE ZP580 PoE+ HAT for Raspberry Pi 5 Power Over Ethernet HAT Adapter Board Supports 802.3af/at Network Standard with Onboard Cooling Fan
star

79

GUTE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#7

  • The PoE+ HAT expansion board is an 802.3af/at-compliant Power Over Ethernet accessory for the Raspberry Pi 5. With Standard Pi 40PIN GPIO stackable header, allows connecting other HATs and peripherals.
  • Suitable for use with a PoE router or switch that supports the IEEE 802.3af/at networking standard. Providing both network connection and power supply for your Raspberry Pi in only one Ethernet cable.
  • Equipped with an onboard active cooling fan for better heatsink and more stable operation performance. If you don’t need to use the cooling fan, you can also disassemble it.
  • Comes with onboard 5V & 12V header outputs. 5V header provides up to 4.5A output (MAX 25W for 12V+5V total output power). Be able to power extra devices while providing stable power to Raspberry Pi.
  • Onboard buck chip: Incorporates original voltage buck chip, providing up to 5A under sufficient heat dissipation condition.
  • Suitable for use with aluminum case kit. For aluminum enclosure, please refer to model ZC501(ASIN: B0DSZYLMSS).
  • 24,99 € AUF AMAZON
Waveshare
Waveshare
Waveshare Power Over Ethernet HAT (H), Compatible with Raspberry Pi 5 / cm 5, 5V 5A Output, Stable Performance, Supports 802.3af/at Network, Isolated Switched-Mode Power Supply, PoE HAT, Board ONLY
star

75

GUTE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#8

  • IEEE 802.3af/at Compliance: The PoE HAT (H) is fully compliant with the IEEE 802.3af/at Power over Ethernet (PoE) standards, enabling seamless power and network connectivity through a single Ethernet cable when connected to a compatible PoE router or switch.
  • Standard GPIO Header: The board is equipped with a standard 40-pin GPIO header, ensuring compatibility with Raspberry Pi 5 and CM 5, allowing easy integration into a variety of projects and applications.
  • Stable Power Performance: Featuring an onboard original IC solution, the PoE HAT (H) ensures more stable PoE power delivery, providing reliable power supply for the Raspberry Pi even under load.
  • Isolated Switched-Mode Power Supply (SMPS): The HAT adopts an isolated switched-mode power supply, offering improved efficiency and protection against electrical noise, making it more robust and suitable for industrial and long-term use.
  • Compact and Easy to Assemble: With its compact design and simple assembly, the PoE HAT (H) is easy to integrate into your Raspberry Pi setup, saving space while offering reliable power and network connectivity in a single unit. Rich WiKi Resources: We provide official Wiki resources, please visit our store and click the wiki page to get resources.
  • 33,99 € AUF AMAZON
Waveshare
Waveshare
Waveshare NVMe PCIe to M.2 HAT+ Adapter with PoE, Compatible with Raspberry Pi 5, Supports NVMe Drive Protocol 2230/2242 M.2 Solid State Drive and 802.3af/at Network Standard, with Cooling Fan
star

72

GUTE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#9

  • PCIe To M.2 with PoE HAT,designed for Raspberry Pi 5, supports IEEE 802.3af/at network standard. Adapter for NVMe Protocol M.2 Solid State Drive, High-speed Reading/Writing.
  • Improves reading/writing speed of your Pi. Note: Only supports the NVMe Protocol Solid State Drives.
  • Based on 16PIN PCIe Interface of Raspberry Pi 5. Standard Raspberry Pi 40PIN GPIO stackable header, allows connecting other HATs
  • Onboard Dual LED Indicators,easy to monitor the Working Status. Compatible With 2230/2242 Size M.2 Solid State Drive. Supports Gen2 and Gen3 Modes, Supports Booting PI5 From Solid State Drive.
  • Providing both network connection and power supply for your Raspberry Pi in one cable
  • 5V header provides up to 4.5A output (MAX 25W for 12V+5V total output power). be able to power extra devices while providing stable power to Raspberry Pi.
  • ️Rich WiKi Resources️ We provide official Wiki resources, please contact us for more information.
  • 35,99 € AUF AMAZON
Coolwell
Coolwell
Coolwell for Raspberry Pi 5 PoE HAT Power Over Ethernet HAT (G) 5V 5A Output Supports 802.3af/at Network Standard Fits Raspberry Pi 5 Official Case
star

65

GUTE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#10

  • Waveshare PoE HAT for Raspberry Pi 5, with standard Raspberry Pi 40PIN GPIO header
  • PoE HAT compatible with Raspberry Pi 5, PoE capability，IEEE 802.3af/at-compliant
  • PoE HAT for Raspbrry Pi, onboard original IC solution for more stable PoE power performance
  • For Raspberry Pi 5 PoE HAT kit, adopts non-isolated switched-mode power supply (SMPS)
  • Compact and easy to assemble
  • 25,91 € AUF AMAZON
rpi5 poe hat rpi5 poe nvme poe