Raspberry Pi Ssd Adapter
Die 10 besten Produkte von Dezember 2025
Letzte Aktualisierung:
8. Dezember 2025
Geekworm
Geekworm X1001 PCIe to M.2 NVMe Key-M SSD Shield for Raspberry Pi 5
Kostenloser Versand
98
MAXIMALE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#1 GEWINNER
▼ Mehr anzeigen
▲ Weniger anzeigen
【Compatibility】Only for Raspberry Pi 5 16GB / 8GB / 4GB (NOT included)
【Matching Case (NOT included)】P579 (ASIN: B0CRB3DT5M); Or P579 Case with Official Active Cooler (ASIN: B0CT4P893Q)
【M2 Key-M NVMe SSD Supported】Support M.2 KEY-M NVMe SSD 2230/2242/2260/2280 length installation.【IMPORTANT】DON'T use NVMe SSD with Phison controller, please refer to: https://wiki.geekworm.com/X1001#Important_Notes
【How to Power】Use 5Vdc +/-5%, 5A to power via Raspberry Pi 5, and Pi 5 will power X1001 via FFC PCIe ribbon. Recommend to use Geekworm PD 27W power adapter (ASIN: B0FGPSRQ75 / B0CZCZF2QV / B0CP8SRXSC)
【Packing List】1 x X1001 Shield, 1x Accessories Pack
12,93 € AUF AMAZON
FREENOVE
Freenove M.2 NVMe Adapter V2 for Raspberry Pi 5 (Without SSD), M.2 HAT Add-on Board, Solid State Drive Size 2230 2242 2260 2280, PCIe 2.0/3.0, Max Speed 1231 MB/s
Kostenloser Versand
97
BESTE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#2
▼ Mehr anzeigen
▲ Weniger anzeigen
Big Upgrade: Boost your system to an amazing speed by upgrading memory card (SDR104: 104 MB/s max) to SSD (PCIe 2.0: 500 MB/s max, PCIe 3.0: 1231 MB/s max) (Note: The max speed is declared by the Raspberry Pi documentation, usually unable to achieve)
Compatible SSDs: M.2 NVMe SSDs, PCIe 2.0 or 3.0, size 2230 / 2242 / 2260 / 2280 (Note: NOT compatible with M.2 SATA SSDs)
Two Uses: Used as system disk or regular hard drive, provide detailed tutorial (The download link can be found on the product box) (No paper tutorial)
Easy to Use: Just tighten the screws and connect the ribbon cable to install it on the top or bottom (Simple configuration needed, please refer to tutorial)
Compatible Models: Raspberry Pi 5 only (Note: NOT compatible with any other models)
9,95 € AUF AMAZON
GeeekPi
GeeekPi N04 M.2 M-Key NVMe SSD Shield für Raspberry Pi 5, M.2 2280 PCIe to NVMe SSD Shield Pip PCIe Peripheral Board Top für Raspberry Pi 5 4GB/8GB (SSD and Pi5 Board Are not Included) Barebones
35% Rabatt
Kostenloser Versand
94
TOP QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#3
▼ Mehr anzeigen
▲ Weniger anzeigen
N04 M.2 NVMe to PCIe Adapter is designed for the latest Raspberry Pi 5. It supports the installation of NVMe (M-key) drives in M.2 format sizes 2230, 2242, 2260 and 2280. Extra custom CNC SSD mount screw, no soldering required.
PCIe x1 interface in both Gen2 & Gen3 standards. The short trace routing of PCIe is more reliable and faster, fully meeting the signal requirements of PCIe 3.0.
Ventilation hole design provides excellent ventilation airflow for cooling; Integrated voltage regulator delivering up to 3A for the 3.3V power rail, compliant with M.2 (NGFF) standard.
Comes with a FPC PCIe ribbon, M2 and M2.5 screws, spacers, and extra custom CNC SSD mount screw.
【Matching Case (NOT included)】Metal Case for N04 & Raspberry Pi 5, refer to ASIN: B0CMZG29LG; Aluminum Case for N04 & Raspberry Pi 5,refer to ASIN: B0CMZCG8P7
12,93 € AUF AMAZON
Geekworm
Geekworm X1003 PCIe to M.2 NVMe SSD Pip PCIe Peripheral Board Top for Raspberry Pi 5 & Active Cooler
Kostenloser Versand
90
HOHE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#4
▼ Mehr anzeigen
▲ Weniger anzeigen
【IMPORTANT NOTE】X1003 MUST use with Raspberry Pi 5 official Active Cooler
【Compatibility】Raspberry Pi 5 PCIe HAT only for Raspberry Pi 5 16GB / 8GB / 4GB, Model: X1003
【M2 Key-M NVMe SSD Supported】Support M.2 KEY-M NVMe SSD 2230/2242 length installation. (Do not reserve the nut column to fix the 2230 SSD) 【IMPORTANT】DON'T use NVMe SSD with Phison controller, please refer to: https://wiki.geekworm.com/X1003#Important_Notes
【How to Power】Can power the X1003 shield directly from the FFC PCIe ribbon (providing maximum 5W of continuous power) Recommend to use Geekworm PD 27W power adapter (ASIN: B0CP8SRXSC)
【Packing List】1 x X1003 PCIe Peripheral Board, 1x Screws Pack Accessories
【Matching Case (NOT included)】Refer to P579 (ASIN: B0CRB3DT5M); Or P579 Case with Active Cooler (ASIN: B0CT4P893Q); Or Argon NEO 5 Case (ASIN: B0CR1JPCM7); Or P425 ABS Case (ASIN: B0CYQ3T5DF); Or Raspberry Pi 5 official ABS case
14,00 € AUF AMAZON
ZDE
ZDE 2 Stück M.2 NGFF NVMe SSD Länge Verlängern Adapter 2230 bis 2242 nur SSD Verlängerung Klammern Karte Platte PCB Board Solid Festplatte Konverter für Raspberry Pi und PC Computer
Kostenloser Versand
86
SICHERE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#5
▼ Mehr anzeigen
▲ Weniger anzeigen
Dieser M.2 NGFF/NVME SSD 2230 bis 2242 Length Extend Adapter wurde speziell für die Verlängerung Ihrer M.2 SSD entwickelt, wodurch auch die Wärmeableitung der SSD verbessert werden kann.
Einfaches und praktisches Design, einfache Installation von Solid State Drives. Ausgestattet mit einer Schraube für müheloses Ein- und Ausbauen.
Mit diesem Adapter haben Sie die Flexibilität, Ihre M.2 NGFF/NVME-SSD an einer günstigeren Stelle in Ihrem Computergehäuse zu positionieren. Dies kann bei der Kabelverwaltung helfen und den Luftstrom für eine bessere Kühlung optimieren.
Die erweiterte SSD-Halterung kann in jedem Szenario eingesetzt werden, in dem schnelle Speicherkapazität von entscheidender Bedeutung ist, z. B. in Gaming-Rigs, Workstations oder Medienproduktionsmaschinen.
Hinweis: Achten Sie beim Einbau der SSD auf die Einbaurichtung wie in der Abbildung gezeigt.
8,99 € AUF AMAZON
FREENOVE
FREENOVE Dual M.2 NVMe SSD HAT for Raspberry Pi 5, M.2 Adapter AI HAT 2 Slots NAS RAID Kit, Solid State Drive Size 2230 2242 2260 2280, PCIe 2.0 Max Speed 500 MB/s, Detailed Tutorial
Kostenloser Versand
81
GUTE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#6
▼ Mehr anzeigen
▲ Weniger anzeigen
Big Upgrade: Boost your system to an amazing speed by upgrading memory card (SDR104: 104 MB/s max) to SSD (PCIe 2.0: 500 MB/s max) (The write speed of SSD is much faster than that of memory card) (Note: The max speed is declared by the Raspberry Pi documentation, usually unable to achieve)
Dual M.2 Slots: Install 1 or 2 SSDs, used as system disk, regular hard drive or bulid a NAS / RAID. Provide detailed tutorial for Raspberry Pi OS (The tutorial link can be found on the product box, no paper tutorial)
AI Accelerator: Compatible with M.2 Hailo AI accelerator module, so you can integrate high-performance AI (AI module can operate both when installed alone and together with an SSD on dual-slot adapter)
Easy to Use: Just tighten the screws and connect the ribbon cable to install it on the top or bottom (Some SSDs may require connecting the power cable)
Compatible SSDs: M.2 NVMe SSDs, compatible with PCIe 2.0, size 2230 / 2242 / 2260 / 2280 (Note: NOT compatible with M.2 SATA SSDs) (This adapter can be shortened to be shorter than Raspberry Pi, but will not be able to install 2280 size)
19,95 € AUF AMAZON
Geekworm
Geekworm X1002 M.2 NVMe SSD Pip PCIe Peripheral Board Bottom Base for Raspberry Pi 5
Kostenloser Versand
78
GUTE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#7
▼ Mehr anzeigen
▲ Weniger anzeigen
【Compatibility】only for Raspberry Pi 5 16GB / 8GB / 4GB (NOT included)
【M2 Key-M NVMe SSD Supported】Support M.2 KEY-M NVMe SSD 2230/2242/2260/2280 length installation. 【IMPORTANT】DON'T use NVMe SSD with Phison controller, please refer to: https://wiki.geekworm.com/X1002#Important_Notes
【How to Power】Use 5Vdc +/-5%, 5A to power via Raspberry Pi 5, and Pi 5 will power X1002 via FFC PCIe ribbon. And 2pcs pogo pins to supplementary power during large data transfer. Recommend to use Geekworm PD 27W power adapter (ASIN: B0FGPSRQ75)
【Packing List】1 x X1002 PCIe to NVMe Base, 1x Accessories Pack
【Matching Case (NOT included)】Refer to P580 Case (ASIN: B0D99HVX3C)
【Cooling Solution (NOT included)】Support Raspberry Pi 5 Active Cooler installation, or Geekworm H505 Active Cooler (ASIN: B0D44Y95GW), H509 Passive Cooler (ASIN: B0DDPWYLY1), Argon THRML 30mm Active Cooler (ASIN: B0CSJQC7DV)
【UPS Solution (NOT included)】Support work with X728 UPS (ASIN: B087J7WTYM), but there is no case for X1002 and X728
15,80 € AUF AMAZON
GeeekPi
GeeekPi Armor Gehäuse mit CN01 M.2 M-Key PCIe 3.0 Adapter für Raspberry Pi 5, unterstützt M.2 NVMe SSD 2230/2242/2260/2280
Kostenloser Versand
78
GUTE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#8
▼ Mehr anzeigen
▲ Weniger anzeigen
CN01 M.2 M-key PCIe 3.0 x1 Expansion Board für Raspberry Pi 5: Unterstützt M.2 NVMe SSDs in 2230, 2242, 2260 und 2280 Formfaktoren; bietet eine direkte PCIe-Schnittstelle für High-Speed-Datenübertragung; Utilizes ein FPC-Kabel (flexibler Printed Circuit) Sicher und flexibel. ction to the Raspberry Pi 5's PCIe slot
Raspberry Pi 5 Armor Case: Custom designed for the Raspberry Pi 5; ensuring a snug fit and comprehensive protection
Verbesserte Kühlung: Enthält ein hochwertiges thermisches Pad für effiziente Wärmeableitung von SSD; die Aluminiumwärmedämpfung auf dem Erweiterungsbrett hilft bei optimaler Betriebstemperatur
Einfache Installation: Einfache Plug-and-Play-Installation mit klaren Anweisungen für hassle-freie Installation; entworfen für benutzerfreundliche Montage, auch mit begrenztem technischem Fachwissen
Performance-Improvement: Die Fähigkeit, die SSD zu boot signifikant zu verringern, Startup Zeiten und die Gesamtleistung des Systems zu erhöhen
25,99 € AUF AMAZON
Geekworm
Geekworm X1004 Dual M.2 NVMe SSD Shield PCIe Peripheral Board for Raspberry Pi 5
Kostenloser Versand
74
GUTE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#9
▼ Mehr anzeigen
▲ Weniger anzeigen
【Compatibility】only for Raspberry Pi 5 16GB / 8GB / 4GB (NOT included)
【Support Dual M2 SSD】Compatible with M.2 KEY-M NVMe SSD 2280 (NOT included)
【How to Power】5Vdc +/-5%, 5A via Raspberry Pi 5. Recommend to use Geekworm PD 27W power adapter (ASIN: B0CP8SRXSC); or GaN PD 27W power supply (ASIN: B0CZCZF2QV)
【Support NVMe Boot】X1004 now supports NVMe boot with the latest eeprom (2024/05/17 version)
【Packing List】1 x X1004 PCIe to M2 NVMe Shield, 1x Accessories Pack
【Matching Case (NOT included)】Refer to P579-V2 Case (ASIN: B0CRB3DT5M), or P579-V2 Case with active cooler (ASIN: B0CT4P893Q)
【Note】Since X1004 is using ASMedia ASM1182e PCIe switch, it can't support PCIe Gen 3 speed, so even though we forced to turn on PCIe Gen 3.0 setting in Raspberry Pi 5, it is limited by ASMedia ASM1182e PCIe switch. speed is still PCIe Gen 2.0 speed.
38,50 € AUF AMAZON
GeeekPi
GeeekPi N05 M.2 M-Key NVMe HAT für Raspberry Pi 5, M.2 2242 PCIe to NVMe SSD Shield Pip PCIe Peripheral Board Top for Raspberry Pi 5 4GB/8GB (SSD and Pi5 Board Are not Included)
30% Rabatt
Kostenloser Versand
65
GUTE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#10
▼ Mehr anzeigen
▲ Weniger anzeigen
Compatibility --- N05 M.2 NVMe to PICe Adapter is designed for Raspberry Pi 5. It supports the installation of NVMe (M-key) drives in M.2 format sizes 2230 and 2242. Extra custom CNC SSD mount screw, no soldering required.
PCIe Support --- PCIe x1 interface in both Gen2 & Gen3 standards.
PCIe Ultra-Short Signal Lines ---The short trace routing of PCIe is more reliable and faster, fully meeting the signal requirements of PCIe 3.0.
M.2 Standard-Compliant Power System --- Integrated voltage regulator delivering up to 3A for the 3.3V power rail, compliant with M.2 (NGFF) standard.
All Necessary Accessories Included --- Comes with a FPC PCIe ribbon, M2 and M2.5 screws, spacers, and extra custom CNC SSD mount screw.
13,99 € AUF AMAZON
raspberry pi 3 ssd adapter
raspberry pi adapter
raspberry pi 4 ssd adapter
raspberry ssd adapter
raspberry pi 5 ssd adapter
raspberry pi ssd
ssd raspberry pi
raspberry pi fan adapter
raspberry pi wlan adapter
wlan adapter raspberry pi
#1 GEWINNER
