Raspberry Pi Remote Power
Die 10 besten Produkte von Oktober 2025
Letzte Aktualisierung:
9. Oktober 2025
Raspberry Pi
Raspberry Pi Pico 2, RP2350 Mikrocontroller-Board
Kostenloser Versand
99
MAXIMALE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#1 GEWINNER
▼ Mehr anzeigen
▲ Weniger anzeigen
Dual Arm Cortex-M33 oder Dual RISC-V Hazard3 Prozessoren bei 150 MHz CPU
520 KB On-Chip SRAM; 4 MB On-Board QSPI Flash
2 × UART, 2 × SPI-Controller, 2 × I2C-Controller, 24 × PWM-Kanäle, 1 × USB 1.1-Controller und PHY, mit Host- und Geräteunterstützung, 12 × PIO-State-Maschinen
26 Mehrzweck-GPIO-Pins, darunter 4, die für ADC verwendet werden können
21 mm × 51 mm
5,99 € AUF AMAZON
REVODATA
REVODATA 2,5G Typ C PoE Splitter 5V/4A, 48V PoE zu USB-C 5V/4A 20W Ausgang, 2,5Gbps Ethernet, IEEE802.3af/at, Plug and Play für Smart Home, Raspberry Pi 4B/4B+ (TYPEC0504G)
Kostenloser Versand
96
BESTE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#2
▼ Mehr anzeigen
▲ Weniger anzeigen
Typ C 5V/4A Ausgang:48V PoE konvertiert zu Typ C (USB C) 5V/4A adaptiver Stromausgang, der Typ-C Port nur für Stromaufladung.
2.5Gbps Geschwindigkeit:Unterstützt bis zu 2.5Gbps Internetgeschwindigkeit, damit Ihr Gerät mit voller Geschwindigkeit läuft. Bietet eine superschnelle Ethernet-Übertragung ohne Verzögerung.
Einfaches Setup:Einfache Stromversorgung für Ihr Typ-C-Gerät mit Plug-and-Play-Funktion, automatische Erkennung der Stromversorgung durch die Stromversorgungsanlage. Liefert automatisch den richtigen Strom für Typ-C-Geräte.
Mehrfacher Schutz:Unterstützen Sie den Isolationsstromkreisschutz, den Kurzschlussschutz, den Überspannungsschutz, können Ihre Ausrüstung effektiv schützen.
Wie es funktioniert:Mit IEEE802.3af/at PoE-Switch oder PoE-Injektor Strom der Typ-C (USB C) Splitter, der PoE-Splitter wird Strom und Daten über RJ45-Anschluss und Typ-C-Anschluss zu trennen, bietet Strom und Daten für Nicht-PoE-Terminal Typ-C-Gerät wie Smart Home-Gerät.
15,09 € AUF AMAZON
NComputing
NComputing RX540 Raspberry Pi CM5 thin client
92
TOP QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#3
▼ Mehr anzeigen
▲ Weniger anzeigen
Hochleistungs-Thin Client – Powered by Broadcom BCM2712 Quad-Core ARM Cortex-A76 CPU @ 2,4 GHz und 4 GB RAM für reibungslose Virtualisierungserlebnisse auf mehreren Plattformen.
Dual 4K Monitor Support - Two HDMI 2.0 ports supporting resolutions up to 3840x2160 @ 30Hz (single display) or 2560x1600 @ 30Hz (dual display) for enhanced productivity and multi-tasking.
Umfassende Plattform-Kompatibilität – unterstützt nahtlos Citrix Workspace, Microsoft-RDS, Azure Virtual Desktop (AVD), Windows 365, NComputing VERDE VDI und mehr.
Breite Konnektivität: Enthält Gigabit Ethernet (RJ45), Dualband-WLAN (802.11 b/g/n/ac) und 4 USB-Anschlüsse (2 x USB 3.0, 2 x USB 2.0) zum Anschluss einer Vielzahl von Peripheriegeräten, einschließlich Druckern, Scannern, Webcams und Smartcard-Lesern.
Effizienter Stromverbrauch - Geringer Stromverbrauch im Leerlauf (4,3 W) und Schlafmodus (4,15 W), um kostengünstigen Betrieb für Unternehmen zu gewährleisten.
Einfache Verwaltung und Bereitstellung – LEAF OS bietet sicheren Zugriff auf virtuelle Desktops, während PMC Endpoint Manager Konfiguration, Remote-Verwaltung und Firmware-Updates vereinfacht.
Montage & Sicherheit – Inklusive VESA-Halterungs-Kit für flexible Installation und einem integrierten Kensington-Sicherheitsschlitz für verbesserten Geräteschutz.
Garantie & Support - Enthält eine 1-jährige Hardware-Garantie mit optionaler erweiterter Garantie für zusätzlichen Seelenfrieden. Kostenlose Firmware-Updates für das erste Jahr.
297,00 € AUF AMAZON
GeeekPi
GeeekPi Raspberry Pi UPS V5 Power Supply Uninterruptible UPS HAT for Raspberry Pi 5,Support 18650 Battery Charger Power Bank Power Management Expansion Board 5V for Raspberry Pi 4B/3B+/3B/2B/B+/B/A+/A
13% Rabatt
Kostenloser Versand
88
HOHE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#4
▼ Mehr anzeigen
▲ Weniger anzeigen
UPS Plus ist eine neue Generation von USV-Energieverwaltungsmodulen, die OTA-Firmware-Upgrades unterstützen und RTC onboard unterstützen.
Es gibt zwei INA219-Chips an Bord, um die Batteriespannung und den Spannungsausgang von UPS Plus an Raspberry Pi zu erkennen.
Kompatibel mit Raspberry Pi 5 / 4B / 3B+ / 3B / 2B / B+ / B / A+ / A
Paket beinhaltet: 1 x UPS Plus für Raspberry Pi, 4 x M2,5 Kupfersäule, 4 x M2,5 Schrauben, 4 x M2,5 langer Kupferstab, 4 x M2,5 Muttern, 1 x Acrylschild, 1 x Anleitung, Bitte beachten Sie, dass die 18650 Batterien nicht im Lieferumfang enthalten sind.
Informationen zur Verwendung finden Sie unter wiki.52pi.com/index.php?title=EP-0136
39,99 € AUF AMAZON
xicoolee
Uninterruptible Power Supply HAT for Raspberry Pi Zero Series, 5V Stable Output, Solar Charging (5V–24V), Ba-ttery Monitoring via I2C, LED Indicators, Low-Power UPS Expansion Board
Kostenloser Versand
87
SICHERE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#5
▼ Mehr anzeigen
▲ Weniger anzeigen
🔋 Designed for Raspberry Pi Zero Series: Fully compatible with Raspberry Pi Zero / Zero W / Zero 2 W, this UPS HAT provides plug-and-play support with compact size and high energy density.
⚡ Uninterruptible Power Supply with Path Management: Features smart charging and discharging via onboard path management chip—supports charging and powering devices at the same time without power loss.
☀️ Solar Power Support with MPPT Algorithm: Accepts solar panel input from 5V to 24V, with MPPT for optimal power tracking—ideal for outdoor or off-grid Raspberry Pi Zero projects.
📊 I2C Ba-ttery Monitoring & LED Display: Onboard ba-ttery monitoring chip communicates via I2C to report real-time voltage, current, and power data. LED indicators show battery level at a glance.
🛡️ High-Efficiency Power Circuit & Safety Protections: Integrated boost converter and ba-ttery protection ICs ensure stable 5V output and safe operation, even in demanding applications like edge computing or IoT.
27,90 € AUF AMAZON
Hailege
Hailege 5pcs Game Joystick Sensor Game Controller Sensor JoyStick Breakout Module for PS2 Raspberry Pi
Kostenloser Versand
81
GUTE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#6
▼ Mehr anzeigen
▲ Weniger anzeigen
Two analog outputs, all the way to digital output.
High-quality rocker, long life, stable performance.
X, Y-axis output for the two potentiometers, you can read through the AD conversion twist angle.
For two degrees of freedom servo PTZ control or other remote proportional control.
7,49 € AUF AMAZON
Yahboom
Yahboom AI Vision Raspberry Pi 5 STEM Education Robotics ROS2 2DOF Camera Autopilot Educational Project Engineering Electronics 18+ WiFi/APP Control Provide Data Ubuntu20.04 (Without Pi 5)
Kostenloser Versand
81
GUTE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#7
▼ Mehr anzeigen
▲ Weniger anzeigen
【First Raspberry Pi 5 robot】microROS robot is based on Raspberry Pi 5 development board, supports Raspberry Pi 5 power supply protocol, can provide 5.1V/5A power supply for Raspberry Pi 5, to avoid lag and reboot and other abnormalities, to play the full performance of the Raspberry Pi 5, the image visual processing is more clear. On-board ESP32 coprocessor, built-in Wi-Fi and Bluetooth function, can handle a number of sensor data. Please note: not compatible with raspberry pi 4B.
【Fully compatible with ROS2】 Based on the Humble version of the ros2 system, it is widely used, stable and has many case tutorials; The communication technology of MicroROS is used between the main control and the driver board, the code is open-source, the programming software, one-stop learning. No need to worry about the robot hardware is not compatible, provide adaptive ROS2 exclusive function play.
【MS200 is fully compatible with ROS2】supports indoor and outdoor, supports 360° scanning and detection, and realizes three-dimensional mapping; the MicroROS control board supports WiFi, Bluetooth, serial port and other communication functions, supports power supply for Raspberry Pi 5PD, and can be directly connected to the ROS2 environment for use. Easy to use and efficient; built-in 310 motor, the metal material is wear-resistant and durable and provides precise and stable motion control.
【AI visual gameplay】The 2-degree-of-freedom 2MP HD camera gimbal is utilized for AI visual depth development, remote control through APP or handle,paired with the high performance of Raspberry Pi 5, enabling smooth implementation of face, QR code, and posture recognition, object tracking, line-following autonomous driving, and gesture recognition control.
【What do you get】 You get a programmable robot kit with metal chassis construction, most of the accessories already installed, including expansion boards for on-board ESP co-processing and 6-axis IMU, 310-coded geared motors, 7.4V recyclable battery, Raspberry Pi 5 (depending on the version), Pi5 active radiator, radar, and 2DOF camera. High-performance hardware paired with solid electronics course content, including Yahboom's original hands-on training and theory courses.
264,00 € AUF AMAZON
Geekworm
Geekworm KVM-A3 Kit for Raspberry Pi 4 Open Source KVM Over IP (Only Support V3 OS)
Kostenloser Versand
76
GUTE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#8
▼ Mehr anzeigen
▲ Weniger anzeigen
【What is it】This is a kit provides a KVM Over IP solution based on Raspberry Pi 4
【Compatiblity】Only compatible with Raspberry Pi 4.
【Function】Remotely turn on/ turn off / restart your computer; configure configure the UEFI/BIOS; reinstall the OS using the Virtual CD-ROM or Flash Drive; remote use your keyboard and mouse; Simulate a keyboard, mouse, and a monitor and presented in a web browser, etc
【How to Power】Power via USB-C port of X630-A3; Recommend 5V 4A 20W PSU: ASIN B09J4V3RYK
【How to Cool】X630-A3 comes with a cooling fan to cool the raspberry pi, also supports 7mm heatsink on raspberry pi
【What Included】X630 HDMI to CSI-2 Board (for video capture), X630-A3 HAT Board (for ethernet, cooling, RTC, power in etc), X630-A5 Adapter Board (it is installed inside the PC case, connecting the computer motherboard and IO panel cabe of PC case), 0.96 inch OLED (for display, Resolution: 128×64 pixel), Ethernet Cable (TIA/EIA-568.B connection, and it's ATX control signal cable)
【Extra Needed】Raspberry Pi 4, TF Card, HDMI Cable, Power Adapter
【Operation Systerm】Compatible with PiKVM V3 OS
88,89 € AUF AMAZON
Waveshare
Waveshare RaspRover Open-Source 4WD AI Robot,Compatible with Raspberry Pi 4B, Dual Controllers, Computer Vision, PI4B-4GB Included
74
GUTE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#9
▼ Mehr anzeigen
▲ Weniger anzeigen
[Dual Controller]: The sun-controller is ESP32, responsible for accurate motor PID control and multiple sensor data reading, the host controller, Raspberry Pi 4B or 5, provides high-level computing power, and the dual-controller architecture allows the robot to operate more efficiently.
[Open-source Demo Code]: The host is based on the latest Raspberry Pi system (Debian Bookworm), and the WEB application is based on Flask, Python, and all open-source software platforms, easier for users to study and for secondary development.
[Rich Tutorials]: Providing a wealth of JupyterLab interactive tutorials, graphic tutorials, and video tutorials, from introductory features to advanced features, users can learn how to control their robots while watching the tutorials, lowering the learning curve of robotics for beginners.
[Wide Viewing Angle]: Equipped with 2DOF high-torque flexible pan-tilt, provide 360° omnidirectional observing angle, comes with 160° ultra-wide 5MP camera, capturing more extensive images.
[Robot Vision Function]: Integrates robot vision functions such as color, object, gesture recognition, face recognition, and motion detection, expanding for more applications.
[Cross-platform Remote Control]: Support cross-platform remote control, no need to install APP. You may need to use a Tunneling Service such as Ngrok, Cpolar, or LocalTunnel to expose the local network service of the robot (Flask application) to the Internet so that you can control the robot from anywhere.
[Expandability]: The structure is equipped with a mounting plate and a Picatinny rail, which is convenient for expanding other tactical accessories; on the hardware, it reserved LED ports for expanding other peripherals, and also supports attaching with 4G and 5G modules, which makes it convenient for users to realize more possibilities.
315,99 € AUF AMAZON
Geekworm
Geekworm X651 KVM Over IP Kit PCIe Version Support KVM V3 PoE ATX CSI for Raspberry Pi Compute Module 4 (Not Include Raspberry Pi CM4)
Kostenloser Versand
70
GUTE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#10
▼ Mehr anzeigen
▲ Weniger anzeigen
What is it: This kit allows user to realize a KVM project with Raspberry Pi Compute Module 4 (CM4) which can control a computer using a web browser; Supports video and audio; Model: X651 V1.0
Compatiblity and User Manual: 1. for use with Raspberry Pi Compute Module 4 and compatible with all variants; 2. Google Geekworm Wiki and search X651 for user manual
Function: Remotely turn on/ turn off / restart your computer; configure configure the UEFI/BIOS; reinstall the OS using the Virtual CD-ROM or Flash Drive; remote use your keyboard and mouse; Simulate a keyboard, mouse, and a monitor and presented in a web browser, etc
How to Power: 5Vdc +/-5% via POE (IEEE 802.3af, need a POE switch) or Power Input: 5.1Vdc +/-5% , ≥3A power via USB-C port of X651
How to Cool: X651 comes with an active cooling fan (X-FAN30 V1.0) to cool down the Raspberry Pi Compute Module 4, you can also replace it with C235 heatsink
What Included: 1 x X651 V1.0 Expansion Board; 1 x X-FAN30 V1.0 cooling fan board; 1 x 0.96 inch OLED display; 4x Cables; 2x PCI metal bracket; 1 x Screws Pack (Not include Raspberry Pi CM4)
Extra needed to prepare (not included): Raspberry Pi CM4, micro SD card, power adapter or PoE switch
100,00 € AUF AMAZON
raspberry pi remote
raspberry pi power
kodi raspberry pi remote
remote power
power bank raspberry pi
raspberry pi 3 power
raspberry pi power bank
power button raspberry pi
raspberry pi power button
raspberry pi power switch