main logo

Raspberry Pi Pico 2 W Display

Die 10 besten Produkte von Oktober 2025
Letzte Aktualisierung: 9. Oktober 2025
Waveshare
Waveshare
Waveshare 1.3inch LCD Display Module for Raspberry Pi Pico 65K RGB Colors 240×240 Pixels SPI Interface Comes with Raspberry Pi Pico C/C++ and MicroPython Demo
Kostenloser Versand
star

99

MAXIMALE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#1 GEWINNER

  • 240×240 resolution, IPS screen, 65K RGB colors, clear and colorful displaying effect
  • SPI interface, requires minimal IO pins
  • 1x joystick and 4x user buttons for easy interacting
  • Comes with development resources and manual (Raspberry Pi Pico C/C++ and MicroPython examples)
  • Onboard Female Pin Header For Direct Attaching To Raspberry Pi Pico
  • 15,99 € AUF AMAZON
ARCELI
ARCELI
ARCELI IIC I2C TWI 1602 LCD Modul Display, Serielle 16x2 Display Module, Kompatibel mit Raspberry Pi Pico
Kostenloser Versand
star

98

MAXIMALE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#2

  • Einfach zu verwenden. Belegt weniger als vier E/A-Anschlüsse - VCC, GND, SDA (serielle Datenleitung), SCL (Taktleitung).
  • Unterstützt das IIC-Protokoll. Die I2C-Bibliothek für den 1602 wird mitgeliefert, so dass Sie ihn direkt verwenden können.
  • Mit Potentiometern zur Einstellung von Hintergrundbeleuchtung und Kontrast.
  • Spannungsversorgung: 5 V
  • Modul-Adresse: 0x27
  • 5,99 € AUF AMAZON
Waveshare
Waveshare
Waveshare 2.15inch e-Paper Display (B), Compatible with Raspberry Pi 5/4B/3B/Zero/Zero W/Zero 2W/Pico/Pico W/Pico W and Jetson Nano RDK X3, 296x160, Red/Black/White, SPI Interface with Driver Board
Kostenloser Versand
star

96

BESTE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#3

  • No backlight, keeps displaying last content for a long time even when power down
  • Ultra low power consumption, basically power is only required for refreshing
  • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano, RDK X3 Adopts Raspberry Pi HAT+ standard to improve interoperability, helping the users to design and develop faster, easy to use with other peripherals and extend more functions for Raspberry Pi
  • Adapting SPI interface for connecting with controller boards like Raspberry Pi / Arduino / STM32, etc. Onboard voltage translator, compatible with 3.3V / 5V MCUs
  • Rich WiKi Resources: We provide official Wiki resources, please contact us for more information.
  • 22,99 € AUF AMAZON
FREENOVE
FREENOVE
Freenove Breakout Board for Raspberry Pi Pico 1 2 W H WH, Terminal Block Shield HAT with Pin Header, GPIO Status LED
Kostenloser Versand
star

89

HOHE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#4

  • Compatible Models: Raspberry Pi Pico / Pico H / Pico W / Pico WH / Pico 2 / Pico 2 W (NOT included in this kit)
  • GPIO Status LED: LED on if GPIO outputs / inputs high level, LED off if GPIO outputs / inputs low level
  • Independent LED: The status LED is driven by the chip instead of the GPIO so the GPIO will not be affected
  • Terminal Block and Header: Connect to all pins of Raspberry Pi Pico, 2.54 mm (0.1 inch) pitch
  • Pin Name: The name of each Pin is printed next to it
  • 14,95 € AUF AMAZON
FREENOVE
FREENOVE
Freenove Raspberry Pi Pico 2 W Board Pre-Soldered Header, Dual Arm Cortex-M33 and Dual Hazard3 RISC-V Microcontroller, Development Board, Tutorial Example Projects
Kostenloser Versand
star

88

HOHE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#5

  • Latest Version: Higher core clock speed, double memory, more powerful Arm cores, optional RISC-V cores (compared to the 1 series) (This W version has onboard wireless LAN and Bluetooth)
  • Switchable Cores: Allows users to choose between dual industry-standard Arm Cortex-M33 cores and dual open-hardware Hazard3 cores
  • Compatibility: Delivers a significant performance boost, while retaining software- and hardware-compatible with the 1 series
  • Detailed Tutorial: Provides step-by-step guide with MicroPython, C and Processing (Java) Code (The download link can be found on the product box) (No paper tutorial)
  • Example Projects: Each project has schematics, wiring diagrams, complete code and detailed explanations (Need extra items)
  • 20,95 € AUF AMAZON
Waveshare
Waveshare
Waveshare 3.5inch Capacitive Touch Display Module, Compatible with Raspberry Pi 5/4B/3B/Zero/Zero W/Zero 2W/Pico/Pico W/Pico WH// ESP32 / Arduino,320×480 Resolution, IPS Display
Kostenloser Versand
star

80

GUTE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#6

  • 320×480 resolution, 262K colors, clear and colorful displaying effect. High touch screen transmittance, fast response and long lifetime
  • Embedded with ST7796S driver chip and FT6336U capacitive touch control chip, using SPI and I2C communication respectively, minimizes required IO pins
  • Onboard TF card slot for storing more pictures, videos, music, etc. Adapting 15PIN connector and 18PIN FPC slot for connecting the LCD module to the host board
  • Onboard voltage translator, compatible with 3.3V / 5V operating voltage
  • Rich WiKi Resources: We provide official Wiki resources, please contact us for more information.
  • 29,99 € AUF AMAZON
Raspberry Pi
Raspberry Pi
Raspberry Pi® Pico 2 W Mikrocontroller PICO 2W  
star

80

GUTE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#7

  • Dual Arm Cortex-M33 oder Dual RISC-V Hazard3 Prozessoren bei 150 MHz CPU
  • 520 KB On-Chip SRAM; 4 MB On-Board QSPI Flash
  • 2,4 GHz 802.11n Wireless LAN und Bluetooth 5.2
  • 2 × UART, 2 × SPI Controller, 2 × I2C Controller, 24 × PWM Kanäle, 1 × USB 1.1 Controller und PHY, mit Host- und Geräteunterstützung, 12 × PIO State Machines
  • 26 Mehrzweck-GPIO-Pins, darunter 4, die für ADC verwendet werden können
  • 21 mm × 51 mm
  • 8,99 € AUF AMAZON
Waveshare
Waveshare
Waveshare 2.15inch e-Paper HAT+ (G), Compatible with Raspberry Pi 5/4B/3B/Zero/Zero W/Zero 2W/Pico/Pico W/Pico WH, 296x160, Red/Yellow/Black/White, SPI Interface E-Ink Display with Driver Board
Kostenloser Versand
star

78

GUTE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#8

  • No backlight, keeps displaying last content for a long time even when power down
  • Ultra low power consumption, basically power is only required for refreshing
  • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano, RDK X3 Adopts Raspberry Pi HAT+ standard to improve interoperability, helping the users to design and develop faster, easy to use with other peripherals and extend more functions for Raspberry Pi
  • Adapting SPI interface for connecting with controller boards like Raspberry Pi / Arduino / STM32, etc. Onboard voltage translator, compatible with 3.3V / 5V MCUs
  • Rich WiKi Resources: We provide official Wiki resources, please contact us for more information.
  • 25,99 € AUF AMAZON
Wonrabai
Wonrabai
2.13inch E-Ink Display HAT V4 Version Compatible with Raspberry Pi 5/ 4B/3B+/3B/2B/A+/Zero W/Zero 2 W/Pico W/Pico 2WJetson Nano, 250x122 Pixel e-Paper HAT, SPI Interface, Support Partial Refresh
Kostenloser Versand
star

74

GUTE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#9

  • 2.13inch E-Ink display HAT, Black and White display color, 3.3V/5V operating voltage. Compatible with Raspberry Pi 5/ 4B/3B+/3B/2B/A+/Zero W/Zero 2 W/Pico W/ Pico 2W Jetson Nano,etc.
  • It is E-Ink Display, which is no backlight required, and it can keep displaying last content for a long time even when power down. Which is suitable for scenarios that require long-term static display (such as electronic labels, information boards).
  • Ultra low power consumption, basically power is only required for refreshing. The standby current is less than 0.01uA (almost none), and the typical refresh power consumption is 26.4mW. Partial refresh takes only 0.3s, and full refresh time takes 2s, which significantly improves the interactive experience and reduces the frequency of full-screen flickering.
  • SPI interface, for connecting with controller boards like Ardu/STM32, etc. Provides Online Pinout and sample programs.
  • Comes with Online Tutorial Usage Guide / Driver Board Circuit Diagram / Demo/ Development Resources/FAQ,etc, Please check: n9.cl/vtl3sa
  • 18,28 € AUF AMAZON
Wonrabai
Wonrabai
2inch LCD Display Module Compatible with Raspberry Pi 5/4B/3B/Pi3B/ Pi Zero 2W/Zero W/Pi Zero 2W/ Zero 2WH, IPS Screen 240x320 Resolution, 262K Display Color,ST7789VW Driver Chip SPI Interface
Kostenloser Versand
star

69

GUTE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#10

  • This is 2inch LCD Display Module, 240×320 resolution, 262K colors, clear and colorful displaying effect
  • Embedded ST7789VW driver chip. SPI Interface, Compatible with Raspberry Pi/with Ardui/ STM32, etc.
  • As a 2-inch IPS display module with a resolution of 240 * 320, it uses an SPI interface for communication. The LCD has an internal controller with basic functions, which can be used to draw points, lines, circles, and rectangles, and display English, Chinese as well as pictures.
  • The LCD supports 12-bit, 16-bit, and 18-bit input color formats per pixel, namely RGB444, RGB565, and RGB666 three color formats, this demo uses RGB565 color format, which is also a commonly used RGB format.
  • For most LCD controllers, the communication mode of the controller can be configured, usually with an 8080 parallel interface, three-wire SPI, four-wire SPI, and other communication methods. This LCD uses a four-wire SPI communication interface, which can greatly save the GPIO port, and the communication speed will be faster.
  • 14,54 € AUF AMAZON
raspberry pi pico w display raspberry pi pico 2 w raspberry pi pico 2 w+ raspberry pi pico w 2 raspberry pi pico 2 w header raspberry pi pico 2 w zubehör raspberry pi zero 2 w display pi pico 2 w raspberry pi pico w raspberry pi zero 2 w display case