Raspberry Pi Hutschiene Poe
Die 10 besten Produkte von Dezember 2025
Letzte Aktualisierung:
10. Dezember 2025
Waveshare
Power Over Ethernet PoE HAT für Raspberry Pi 4 B /3B+, IEEE 802.3af/at PoE Netzwerk Standard, 5V USB-A und 12V Header Ausgänge, Onboard Lüfter und MP8676 Buck Chip
98
MAXIMALE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#1 GEWINNER
▼ Mehr anzeigen
▲ Weniger anzeigen
【PoE HAT For Raspberry Pi 4B/3B+】Standard Raspberry Pi 40PIN GPIO header, supports Raspberry Pi 3B+/4B, allows Power Over Ethernet HAT connecting other HATs.
【Power Over Ethernet】PoE (Power Over Ethernet) capability, IEEE 802.3af/at-compliant power sourcing equipments, providing both network connection and power supply for your Raspberry Pi in one Ethernet cable.
【PoE HAT Isolated】Fully isolated switched-mode power supply (SMPS)
【5V USB-A & 12V Header Outputs】5V USB-A provides up to 4A output (MAX 25W for 12V+5V total output power), While providing stable power for the Raspberry Pi, there's also a USB-A port for powering extra external device.
【Onboard Cooling Fan and MP8676 Buck Chip】PoE HAT with high speed active cooling fan, better heat dissipation, incorporates MP8676 original voltage buck chip, providing up to 4.5A output for Raspberry Pi and USB-A port.
24,49 € AUF AMAZON
ZDE
ZDE ZP581 PoE HAT PCIe to M.2 Key-M NVMe SSD Adapter Board with Onboard Cooling Fan Compatible with Raspberry Pi 5 Support M.2 NVMe SSD 2230/2242/2280
96
BESTE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#2
▼ Mehr anzeigen
▲ Weniger anzeigen
PoE HAT Supported: The adapter board is a Power Over Ethernet (PoE) expansion board for the Raspberry Pi 5. Providing both network connection and power supply for your Raspberry Pi in only one Ethernet cable.
802.3af/at Network Standard Supported: Suitable for use with a PoE router or switch that supports the IEEE 802.3af/at networking standard.
M.2 Key-M NVMe SSD Supported: Support M.2 NVMe SSDs for fast data access and storage. Compatible with M.2 KEY-M NVMe SSD in 2230/2242/2280 length.
Onboard Cooling Fan: Equipped with an onboard active cooling fan for better heat dissipation effect and more stable operation performance. If you don’t need to use the cooling fan, you can also disassemble it.
Compatibility: only compatible with Raspberry Pi 5 8GB/4GB computer (NOT include Raspberry Pi 5).
32,99 € AUF AMAZON
Waveshare
PCIe zu M.2 mit PoE Ethernet Netzteil HAT für Raspberry Pi 5, Unterstützt NVMe Protokoll M.2 Solid State Drive in 2230/2242 Größe, IEEE 802.3af/at PoE Netzwerk Standard, 5V 5A Stromausgang
96
BESTE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#3
▼ Mehr anzeigen
▲ Weniger anzeigen
PCIe to M.2 with PoE HAT (C) for Raspberry Pi 5, supports IEEE 802.3af/at network standard, adapter for NVMe protocol M.2 Solid State Drive, high-speed reading/Writing
PoE M.2 HAT+ (C) expansion board based on 16PIN PCIe interface of Raspberry Pi 5. Standard Raspberry Pi 40PIN GPIO stackable header, allows connecting other HATs
NVMe Drive Protocol support, compatible with 2230 / 2242 size M.2 Solid State Drive. Supports Gen2 and Gen3 modes, Supports booting PI5 from Solid State Drive
Power Over Ethernet, providing both network connection and power supply for your Raspberry Pi in one cable. 37V ~ 57V DC in PoE power input, 5V 5A (MAX) Power output
Onboard Dual LED Indicators, Easy to monitor the Working Status
33,59 € AUF AMAZON
Revotech
Gigabit Micro USB PoE Splitter 5V 3A, IEEE 802.3af/at, 10/100/1000Mbps für Raspberry Pi 3B, Tablets, Dropcam Power Over Ethernet USB Adapter (USB0503G Schwarz)
91
HOHE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#4
▼ Mehr anzeigen
▲ Weniger anzeigen
【PoE 48V zu Micro USB 5V/3A】 Wandelt 48V PoE in eine Micro USB 5V/3A Ausgangsspannung um. Micro USB-Kabel für die Stromversorgung und RJ45-Kabel für die Netzwerkübertragung. Nicht-PoE-Geräte mit Micro USB-Anschlüssen können den gleichen Komfort der PoE-Stromversorgung wie PoE-Geräte genießen.
【Max 15W Ausgang】 Automatische Erkennung, angemessene Stromabgabe an angeschlossene Geräte. Bis zu max. 15W (5V/3A) über den Micro USB-Anschluss.
【Gigabit-Geschwindigkeit bis zu 1000Mbps】 Unterstützt schnelle Gigabit-Übertragung, kompatibel mit 10/100/1000Mbps Geschwindigkeiten.
【Plug and Play】 Einfach an Endgeräte anschließen und arbeiten, benutzerfreundlich, vermeidet komplexe Konfigurationen.
【Mehrfacher Schutz】 Isolationsschutz, Kurzschlussschutz, Überspannungsschutz, schützt Ihre Geräte effektiv.
13,39 € AUF AMAZON
LUCKFOX
LUCKFOX PoE HAT (F) Power Over Ethernet Expansion Board for Raspberry Pi 5, 12V and 5V Power, GPIO Header, Support PoE/PoE+ and 802.3af/at Network Standard
88
HOHE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#5
▼ Mehr anzeigen
▲ Weniger anzeigen
PoE+ capability - IEEE 802.3af/at compliant, connect and power Raspberry Pi via a single Ethernet cable.
High-Power Buck Chip - Supports up to 5A output with optimized thermal management.
Rich Interface and Flexible Expansion - Onboard 5V and 12V interfaces for more peripherals, with total 25W power budget
Speedily Heat Dissipation - Onboard high-speed active cooling fan, equipped with metal fins to accelerate heat dissipation
Suitable for Raspberry Pi 5 - Standard Raspberry Pi 40PIN GPIO and stackable header, allows connecting other Expansion Board
27,83 € AUF AMAZON
Waveshare
POE M.2 HAT+ Karte Kombiniert Power Over Ethernet POE HAT und PCIe zu M.2 Adapter für Raspberry Pi 5, Unterstützt IEEE 802.3af/at Netzwerk Standard und M.2 NVME Festplatten der Größe 2230/2242
81
GUTE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#6
▼ Mehr anzeigen
▲ Weniger anzeigen
PCIe to M.2 with PoE HAT designed for Raspberry Pi 5, supports IEEE 802.3af/at network standard, adapter for NVMe protocol M.2 Solid State Drive, high-speed reading/writing
POE M.2 HAT+ expansion board connecting to PI5 via 16PIN cable, based on 16PIN PCIe interface of Raspberry Pi 5. Standard Raspberry Pi 40PIN GPIO stackable header, allows connecting other HATs
NVMe Drive Slot support, only supports the NVMe Protocol Solid State Drives, compatible with 2230/2242 Size M.2 Solid State Drive, supports Gen2 and Gen3 modes, supports booting PI5 from Solid State Drive
Power Over Ethernet, providing both network connection and power supply for your Raspberry Pi in one cable. Onboard 5V & 12V header outputs, 5V header provides up to 4.5A output (MAX 25W for 12V+5V total output power) be able to power extra devices while providing stable power to Raspberry Pi
Active cooling fan, accelerate cooling effect, more stable performance
34,55 € AUF AMAZON
DSLRKIT
DSLRKIT Power Over Ethernet PoE HAT IEEE802.3af DC 5V 2.5A with 1.5KV Isolation for Raspberry Pi 4B 3B+ 3B Plus
79
GUTE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#7
▼ Mehr anzeigen
▲ Weniger anzeigen
Support the IEEE 802.3af/802.3at the Power over Ethernet PoE Switch
Support 48V~57V Passive Power Over Ethernet PoE Switch ; Support 48V~57V Passive Power Over Ethernet PoE injector
Maximum.12Watt DC5V 2.5A
With 1.5KV isolation
Compatible unsolicited Passive PoE switch
11,90 € AUF AMAZON
MokerLink
MokerLink 5 Port PoE Gigabit Industrial DIN-Rail Ethernet Switch Hutschiene, 60W PoE+ Leistung, 14Gbit/s Schaltkapazität, IP40 Unmanaged Network Switch (-40 bis 185°F), mit Netzteil
74
GUTE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#8
▼ Mehr anzeigen
▲ Weniger anzeigen
Dieser Netzwerk-Switch umfasst 4 Gigabit-PoE-Ethernet-Ports und 1 Gigabit-Uplink, alle Ports unterstützen eine Rate von 10/100/1000 Mbit/s, eine Schaltkapazität von bis zu 14 Gbit/s und eine höhere Datenübertragungsleistung
Der Poe-Port 1-4 unterstützt IEEE802.3af/at-Standardprotokoll, kann mehrere Poe-Geräte wie POE-Kameras, Poe-APs usw. anschließen. Bitte beachten Sie, dass passives 24V-Poe nicht unterstützt wird
Die Schale besteht aus einer Aluminiumlegierung in Industriequalität, die robuster ist, Oberflächenrillendesign, bessere Wärmeableitung, integriertes DIN-Schienenmontage-Kit, Installation und Demontage sind sehr einfach
Schutzgrad IP40, Arbeitstemperatur -40~75 °C (-40~185°F), super Robustheit, Blitzschutz, Antistatik- und Überlastschutz, Anpassung an verschiedene raue Umgebungen
Duales Netzteil, automatische Fehlerumschaltung, Anti-Reverse-Anschluss schadet dem Gerät nicht, höhere Zuverlässigkeit, ausgestattet mit einem UL-zertifizierten Netzteil, kann ohne zusätzlichen Kauf verwendet werden
Unterstützt Auto-Negotiation, Plug-and-Play, keine Konfiguration erforderlich, CPU mit niedrigem Stromverbrauch, kein Lüfter leiser Betrieb, grüne Energieeinsparung, geeignet für verschiedene Netzwerke wie Heimbüro, Computerraum, Lager, Fabrik, kompakte Steuerbox und andere Industrieszenarien mit Ethernet-Zugang
79,99 € AUF AMAZON
Waveshare
8-K-Ethernet-Relaismodul, Modbus RTU/Modbus TCP-Protokoll, unterstützt PoE-Netzteil, mit verschiedenen Isolations- und Schutzschaltungen, Schienenmontagegehäuse in Industriequalität
70
GUTE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#9
▼ Mehr anzeigen
▲ Weniger anzeigen
Dieses Produkt ist ein industrielles 8-K-Relaismodul, das über Ethernet-Port gesteuert wird, nimmt Modbus RTU/Modbus TCP-Protokolle an, unterstützt PoE-Stromversorgung, kommt auch mit einem ABS-Schienenmontagegehäuse. 4 LEDs und Netzwerkanzeigen zur Anzeige des MCU-Status und des Signalübertragungsstatus.
Unterstützt das Senden von Modbus RTU/TCP-Protokollbefehlen über Ethernet-Port zur Steuerung von Relais und verschiedenen Geräten. Unterstützt mehrere Kommunikationsmodi, nimmt Modbus-Protokoll an, unterstützt TCP Server / TCP Client / UDP Mode / UDP Multicast / HTTP / MQTT Unterstützt Modbus RTU Protokoll / Modbus TCP-Protokoll
【Multi-Konfigurationsmethoden】 Unterstützt Software und Webbrowser-Konfiguration, erhält dynamische IP über DHCP, Verbindung mit dem Domänennamenserver über DNS-Protokoll
【Multi-Netzteil-Optionen, breiter Netzeingang】 DC-Stromanschluss: verwendet direkt einen Netzstecker für die Stromversorgung; Schraubklemme: DC 7 ~ 36 V Weitbereichsstromeingang; PoE-Port: IEEE 802.3af PoE-konform
Verfügt über Flash-on, Flash-Off-Funktion, durch Übergeben von Argument an den Befehl ist es möglich, das Relais für eine Weile einzuschalten und dann automatisch zu schließen. Onboard-Optokoppler-Isolierung, verhindert, dass das Relais durch Hochspannungskreise gestört wird.
56,67 € AUF AMAZON
Waveshare
POE M.2 HAT+ (B) Kombiniert PCIe zu M.2 und Power Over Ethernet POE für Raspberry Pi 5, Unterstützt NVMe M.2 2230/2242/2260/2280 SSD, IEEE 802.3af/at POE Netzwerk Standard
69
GUTE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#10
▼ Mehr anzeigen
▲ Weniger anzeigen
POE M.2 HAT+(B) is a combination of Power over Ethernet (PoE) and PCIE to M.2 for Raspberry Pi 5, supports IEEE 802.3af/at networking standard, supports M.2 NVMe hard drives in 2230 / 2242 / 2260 / 2280 sizes, supports booting PI5 from Solid State Drive
PCIe to M.2 with PoE HAT (B) only applicable to Raspberry Pi 5, connecting to PI5 via 16PIN PCIe cable. With standard Raspberry Pi 40pin GPIO stackable header, allows connecting other HATs
Supports PCI-E×1 Gen2 or Gen3 mode
Adopts fully isolated Switch Mode Power Supply (SMPS) mode power
Onboard operational indicator lights, the PWR is continuously lit when powered on, and the ACT blinks during read and write operations, making the operational status easily visible
34,55 € AUF AMAZON
hutschiene raspberry pi
raspberry pi hutschiene
poe raspberry pi
raspberry pi poe
raspberry pi gehäuse hutschiene
raspberry pi hutschiene netzteil
raspberry pi netzteil hutschiene
raspberry hutschiene
raspberry pi poe head
hutschiene raspberry pi 4