main logo

Raspberry Pi 5 Sim Card

Die 10 besten Produkte von Oktober 2025
Letzte Aktualisierung: 9. Oktober 2025
Waveshare
Waveshare
Waveshare PCIe to M.2 4G/5G and USB 3.2 HAT, Compatible with Raspberry Pi 5 Cellular Modem and SIMCom/Quectel 4G/5G LTE Modules, Comes with 5G-4IN1-PCB Antenna, High-Speed Networking
Kostenloser Versand
star

98

MAXIMALE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#1 GEWINNER

  • ✅Designed for Raspberry Pi 5, HAT+ standard design with onboard I2C EEPROM, and supports Raspberry Pi 40PIN GPIO stackable expansion. Extends 3x high-speed USB 3.2 Gen1 ports for connecting more peripherals
  • ✅Onboard M.2(NGFF) Key B slot, supports SIM7600XX-M.2, SIM82XX and RM5XX series 4G/5G modules and is compatible with 3042/3052 packages. Onboard Type-C port for connecting to a PC for 4G/5G networking, debugging and firmware updating, or external power supply input
  • ✅Onboard power monitoring chip for real-time measurement of voltage, current and power. Onboard SIM card slot for NANO-SIM card
  • ✅Onboard Reset button, Power and Network indicators for easy debugging and monitoring the operating status. Comes with customized 5G-4IN1-PCB Antenna for neat wiring management, supports top or bottom installation. Reserved airflow vent and mounting holes for cooling fan to increase airflow and provide better heat dissipation
  • ✅The 4G/5G module is NOT included, please purchase separately according to your needs. Comes with 5G-4IN1-PCB antenna by default, if you need an external 5G antenna for outdoor testing, you can choose 5G/4G/3G/2G External Antenna or 5G/4G/3G/GNSS External Antenna.
  • 49,99 € AUF AMAZON
Coolwell
Coolwell
Coolwell Cat-1/GSM/GPRS/GNSS HAT for Raspberry Pi Raspberry Pi 5 4B+ 4B 3B+ 3B 2B+ Zero W WH Jetson Nano Based On A7670E Module GNSS Positioning Support LTE Cat-1 / 2G
star

96

BESTE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#2

  • For Raspberry Pi 5 Cat-1/GSM/GPRS/GNSS HAT, standard Raspberry Pi 40PIN GPIO extension header, fits Raspberry Pi series boards
  • For Arduino Cat-1/GSM/GPRS/GNSS HAT, breakout common used control pins of the A7670E module, make it easy to connect with hosts boards like for Arduino/STM32
  • For Jetson Nano Cat-1/GSM/GPRS/GNSS HAT, supports protocols including TCP/IP, HTTP(s), MQTT(s), FTP(s), and SSL; Supports GPS, BeiDou, GLONASS positioning
  • Supports dial-up, telephone call, SMS; supports LBS base station positioning, it is able to get the approximate position info via mobile network
  • Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)
  • 41,27 € AUF AMAZON
Raspberry Pi
Raspberry Pi
Raspberry Pi 5 (16 GB)                          
15% Rabatt
star

95

TOP QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#3

  • SC1113
  • 139,89 € AUF AMAZON
Coolwell
Coolwell
R800C GSM/GPRS HAT for Raspberry Pi Series & Jetson Nano, Support 2G Communication, Phone Call & SMS
Kostenloser Versand
star

89

HOHE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#4

  • Supports SMS, phone call, GPRS, TCP/IP, DTMF, HTTP, FTPl, etc.
  • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards and Jetson Nano
  • UART interface, for connecting controller boards like Ardui/STM32
  • Comes with online development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)
  • 29,50 € AUF AMAZON
LUCKFOX
LUCKFOX
LUCKFOX 4G HAT for Raspberry Pi, Based on Waveshare SIM7600E-H, Enabling LTE Cat-4 4G/3G/2G Communication & GNSS Positioning, Compatible with Raspberry Pi Series Boards/Jetson Nano
star

84

SICHERE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#5

  • Equipped with standard Pi 40PIN GPIO expansion head, and compatible with Raspberry Pi series boards/Jetson Nano. Support dialing, telephone calling, SMS/TCP/UDP/DTMF/HTTP/FTP, etc
  • Support GPS/BeiDou/Glonass/GALILEO/QZSS/LBS base station positioning. The onboard USB interface is used to test AT commands, obtain GPS positioning data, etc. On board 2102 USB to UART converter for serial debugging. Disconnect the UART control pin for connecting STM32 and other motherboards
  • SIM card slot, supporting 1.8V/3V SIM card. TF card slot, used to store files, messages and other data. Car audio jack and audio decoder for making calls. 2 LED indicators, easy to monitor operation status
  • On board voltage converter, the working voltage can be configured as 3.3V or 5V through jumpers. Baudrate: 300bps ~ 4Mbps (default: 115200bps). Autobauding baudrate: 9600bps ~ 115200bps. Control via AT command (3GPP TS 27.007, 27.005 and V.25TER command set)
  • Support SIM application kit: SAT Class 3, GSM 11.14 Release 99, USAT. Provide online development resources and manuals (examples for Raspberry Pi/Jetson Nano/STM32). Please ask 24-hour customer service for relevant manual
  • 75,99 € AUF AMAZON
Waveshare
Waveshare
Waveshare GSM/GPRS HAT for Raspberry Pi 2B/3B/3B+/Zero/Zero W Jetson Nano Based on SIM800C Send Messages Connect to Wireless Internet Transfer Data
star

81

GUTE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#6

  • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano;Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32) Supports SMS, GPRS, DTMF, HTTP, FTP, MMS, email, etc.
  • Supports SMS, GPRS, DTMF, HTTP, FTP, MMS, email, etc.
  • Onboard voltage level translator, 3.3V by default, switch to 5V via jumper. 2x LEDs for indicating the module working status. SIM card slot for 1.8V/3V SIM card 2x LEDs for indicating the module working status.
  • Baudrate auto detection (1200bps ~115200bps). Control via AT commands (3GPP TS 27.007, 27.005, and SIMCOM enhanced AT Commands) Baudrate auto detection (1200bps ~115200bps).
  • Supports SIM application toolkit: GSM 11.14 Release 99;UART interface, for connecting host control boards like Arduino/STM32 UART interface, for connecting host control boards like Arduino/STM32. Supports SIM application toolkit: GSM 11.14 Release 99.
  • 30,99 € AUF AMAZON
iiunius
iiunius
Cat-1/GNSS HAT for Raspberry Pi 5/4B/3B/Zero/Zero W/Zero 2W/Pico/Pico W/Pico WH Based On SIM7670G Module Global Multi-Band LTE 4G Cat-1 GNSS SIM Card Slot 3X USB 2.0 Extended Ports
star

79

GUTE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#7

  • 【40PIN GPIO header】Standard Pi 40PIN GPIO extension header, fits Raspberry Pi series boards
  • 【Multi-protocol support】Supports protocols including TCP/IP, HTTP(s), MQTT(s), FTP(s), and SSL, supports RNDIS, NDIS and ECM dial-up, supports GPS, GLONASS, Galileo, BeiDou positioning
  • 【USB Type-A and Type-C interfaces】Onboard USB Type-A and Type-C interfaces, for testing AT Commands, network communication, and so on
  • 【3x USB 2.0 Type-A】Extended 3x USB 2.0 Type-A ports for the host devices such as for Raspberry Pi, Windows PC
  • 【SIM7670G module】Reserved control pads of the SIM7670G module such as UART and USB pins, make it easy to connect with other host boards; SIM card slot, supports 1.8V/3V SIM card
  • 【6x LED indicators】6x LED indicators, easy to monitor the module operating status and USB connecting status
  • 【Development resources and manual 】Comes with online development resources and manual (examples for Raspberry Pi/Jetson Nano/STM32)
  • 60,47 € AUF AMAZON
GeeekPi
GeeekPi
GeeekPi P02 PCIe Slot for Raspberry Pi 5,Convert The Raspberry Pi's PCIe into a PCIe x1 Slot, Support Network Interface Card
Kostenloser Versand
star

76

GUTE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#8

  • 【Compatibility】P02 PCIe Slot Expansion Board is designed for Raspberry Pi 5 to convert Raspberry Pi's PCIe to a PCIe x1 slot. Note: Raspberry Pi 5 is not included.
  • 【Open Slot Design】Structurally compatible with x1, x2, x4, x8, x16 using an open slot design.
  • 【PCIe x1 Supports】 Supports PCIe x1 interface in both Gen2 and Gen3 standards.
  • 【Network Interface Card Supported】PCIe x1 interface Supports Network Interface Card.
  • 【Package Includes】PCIe x1 Slot Expansion Board, 1x FPC Cable, 1x Screw Pack, 1x Screwdriver
  • 25,99 € AUF AMAZON
Waveshare
Waveshare
Waveshare SIM7600E-H 4G-Module, Used for Windows/Linux Dial-up Internet Access, Cloud Platform Communication, GNSS Locating, Compatible with Raspberry Pi/Jetson Nano/ESP32/STM32 Programming Platforms
Kostenloser Versand
star

73

GUTE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#9

  • Typical application: Used for Medical and health, smart payment, public network intercom, environmental monitoring, energy monitoring, fleet management, smart industry, smart agriculture. With 3× IPEX antenna connector, comes with 2× yellow pin header and FPC antenna. Applicable regions: Europe/Southeast Asia/West Asia/Africa/China/Korea
  • Compatible with 2G/3G/4G network with global support. Supports dial-up, telephone calls, SMS/TCP/UDP/MQTT/DTMF/HTTP/FTP, etc. Supports GPS/BeiDou/Glonass/GALILEO/QZSS/LBS base station positioning. Onboard USB and UART interface, for dial-up Internet access, cloud platform communication, GNSS positioning, etc
  • Castellated holes with immersion gold design, small size, easy to integrate into the device by soldering directly or inserting via the pin header. Adapting USB/UART/SIM card/GPIO control pins, easy to develop and debug, better expansibility. Built-in voltage translator, compatible with 3.3V/5V MCU motherboards such as STM32/ESP32
  • Supports multiple power supply methods: USB port, VIN pin, and VBAT pin (for 3.7V lithium batt). Supports 5~26V wide voltage power supply and 3A high current output, to prevent the module from dropping and restarting due to the large instantaneous power consumption, more stable and reliable in industrial use
  • Onboard Nano SIM card slot, supports 1.8V and 3V SIM cards, near the edge of the board design, for easy accessing SIM card. Comes with online development resources and manual (examples for Raspberry Pi/Jetson Nano/STM32)
  • 67,99 € AUF AMAZON
Coolwell
Coolwell
USB to M.2 B Key 5G Module Adapter with Aluminum Alloy Heatsink, Quad Antennas, USB 3.1 Interface, Compatible with SIMCom/Quectel/Fibocom, for 3042/3052, for Raspberry Pi/Jetson/PC
star

68

GUTE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#10

  • 📡 High-Speed 5G Connectivity via USB 3.1 Interface: Enables stable high-speed data transmission by connecting your M.2 Key B 5G module to USB 3.1 host ports. Perfect for DIY network setups using 3042/3052 form factor modules.
  • 🔌 Compatible with SIMCom, Quectel, Fibocom Modules: Supports various popular 5G modules such as SIM8200, RM500Q, and others. Easily integrates with Rasp-berry Pi, Jetson Nano, CM4 baseboards, and Windows/Linux PCs.
  • ❄️ Enhanced Aluminum Alloy Heatsink for Cooling: Comes with a durable aluminum alloy heatsink for effective thermal dissipation, ensuring stable module operation and protecting your hardware from overheating.
  • 📶 Quad SMA Antenna Interface + SIM Card Slot: Equipped with 4 SMA antenna ports and a Nano SIM card slot for flexible 5G signal deployment. Supports fast installation and signal testing for developers and professionals.
  • ⚙️ Plug and Play with Multi-System Support: Supports Windows and Linux. Includes USB cable with auxiliary power to prevent undervoltage issues. Ideal for DIY 5G routers, edge computing, and IoT testing environments.
  • 31,90 € AUF AMAZON
raspberry pi 5 sim card module raspberry pi sim card raspberry pi sim card module raspberry pi 5 sd card sd card raspberry pi 5 raspberry pi 5 sd card reader raspberry pi 5 sd card 64gb raspberry pi 5 sd card 128gb raspberry pi sim card module 5g raspberry pi 5