Raspberry Pi 5 Nvme Hat Dual
Die 10 besten Produkte von Dezember 2025
Letzte Aktualisierung:
9. Dezember 2025
FREENOVE
FREENOVE Dual M.2 NVMe SSD HAT for Raspberry Pi 5, M.2 Adapter AI HAT 2 Slots NAS RAID Kit, Solid State Drive Size 2230 2242 2260 2280, PCIe 2.0 Max Speed 500 MB/s, Detailed Tutorial
Kostenloser Versand
98
MAXIMALE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#1 GEWINNER
▼ Mehr anzeigen
▲ Weniger anzeigen
Big Upgrade: Boost your system to an amazing speed by upgrading memory card (SDR104: 104 MB/s max) to SSD (PCIe 2.0: 500 MB/s max) (The write speed of SSD is much faster than that of memory card) (Note: The max speed is declared by the Raspberry Pi documentation, usually unable to achieve)
Dual M.2 Slots: Install 1 or 2 SSDs, used as system disk, regular hard drive or bulid a NAS / RAID. Provide detailed tutorial for Raspberry Pi OS (The tutorial link can be found on the product box, no paper tutorial)
AI Accelerator: Compatible with M.2 Hailo AI accelerator module, so you can integrate high-performance AI (AI module can operate both when installed alone and together with an SSD on dual-slot adapter)
Easy to Use: Just tighten the screws and connect the ribbon cable to install it on the top or bottom (Some SSDs may require connecting the power cable)
Compatible SSDs: M.2 NVMe SSDs, compatible with PCIe 2.0, size 2230 / 2242 / 2260 / 2280 (Note: NOT compatible with M.2 SATA SSDs) (This adapter can be shortened to be shorter than Raspberry Pi, but will not be able to install 2280 size)
19,95 € AUF AMAZON
Waveshare
Waveshare PCIe to 2-CH M.2 HAT+ Adapter Type B Compatible with Raspberry Pi 5, Support 2280/2260 / 2242/2230 Size NVMe Protocol M.2 SS Solid State Drive High-Speed Reading/Writing NVMe HAT
Kostenloser Versand
96
BESTE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#2
▼ Mehr anzeigen
▲ Weniger anzeigen
PCIe To 2-Ch M.2 Adapter Type B For Raspberry Pi 5, Compatible With 2280 / 2260 / 2242 / 2230 Size NVMe Protocol M.2 Solid State Drive , 5Gbps Data Rate, High-Speed Reading/Writing, Raspberry Pi 5 NVMe HAT.Adopts Anti-Oxidation Immersion Gold Process
✅【Connecting To PI5 Via 16PIN Cable】Based On 16PIN PCIe Interface Of Raspberry Pi 5
✅【Dual NVMe Solid State Drives Support】Compatible With 2280 / 2260 / 2242 / 2230 Size M.2 Solid State Drives Supports PCIE X1 Gen2 Only, Supports Booting PI5 From Solid State Drive
✅【NVMe Drive Slot Support】Note: Only supports the NVMe Protocol Solid State Drives.
✅【Improves Reading/Writing Speed Of Your Pi】Faster Reading/Writing Speed Compared To The TF Card Slot Of Raspberry Pi , Greatly Improving Reading/Writing Efficiency Of The System Or Files, Supports Booting Pi5 From NVME Solid State Drive.(As Raspberry Pi does not support booting from NVME by default, you need to modify it to realize it.)
✅【Onboard Dual LED Indicators】Easy To Monitor The Working Status. 【Onboard Power Monitoring Chip And EEPROM】Real-Time Monitoring Of Solid State Drive Power Status For More Stable Operation
❤️Rich WiKi Resources❤️ We provide official Wiki resources, please contact us for more information.
27,99 € AUF AMAZON
Geekworm
Geekworm X1004 Dual M.2 NVMe SSD Shield PCIe Peripheral Board for Raspberry Pi 5
Kostenloser Versand
92
TOP QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#3
▼ Mehr anzeigen
▲ Weniger anzeigen
【Compatibility】only for Raspberry Pi 5 16GB / 8GB / 4GB (NOT included)
【Support Dual M2 SSD】Compatible with M.2 KEY-M NVMe SSD 2280 (NOT included)
【How to Power】5Vdc +/-5%, 5A via Raspberry Pi 5. Recommend to use Geekworm PD 27W power adapter (ASIN: B0CP8SRXSC); or GaN PD 27W power supply (ASIN: B0CZCZF2QV)
【Support NVMe Boot】X1004 now supports NVMe boot with the latest eeprom (2024/05/17 version)
【Packing List】1 x X1004 PCIe to M2 NVMe Shield, 1x Accessories Pack
【Matching Case (NOT included)】Refer to P579-V2 Case (ASIN: B0CRB3DT5M), or P579-V2 Case with active cooler (ASIN: B0CT4P893Q)
【Note】Since X1004 is using ASMedia ASM1182e PCIe switch, it can't support PCIe Gen 3 speed, so even though we forced to turn on PCIe Gen 3.0 setting in Raspberry Pi 5, it is limited by ASMedia ASM1182e PCIe switch. speed is still PCIe Gen 2.0 speed.
38,50 € AUF AMAZON
SUNFOUNDER
SunFounder Dual NVMe Raft für Raspberry Pi 5 PCIe Gen 2.0 zu M.2 HAT Key-M SSD Hailo-8L AI Accelerator Pip M.2 2230/2242/2260/2280, NAS RAID 0/1, Handbuch (Nicht kompatibel mit der Pironman Serie)
Kostenloser Versand
92
TOP QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#4
▼ Mehr anzeigen
▲ Weniger anzeigen
Das Dual NVMe Raft fügt zwei M.2 M-Key Steckplätze (2230-2280) für Raspberry Pi 5 (2GB/4GB/8GB/16GB) hinzu, unterstützt PCIe Gen 2.0 mit bis zu 500MB/s Geschwindigkeit und 3A Leistung pro Steckplatz. Unterstützt zwei SSDs für RAID 0/1 oder eine SSD + Hailo-8L AI-Beschleuniger für Echtzeit-KI-Leistung. Perfekt für Hersteller, NAS-Builder und KI-Entwickler
Verwandeln Sie Ihren Raspberry Pi 12.7 cm einen leistungsstarken Server mit dem Dual NVMe Raft. Unterstützt OpenMediaVault, RAID 0/1 und Dual-SSDs für schnelle, zuverlässige Speicherung. Schnell zu installieren, perfekt für NAS, Home Assistant, Media und Game Center
Das Dual NVMe Raft unterstützt eine SSD und einen Hailo-8L AI-Beschleuniger, der schnellen Speicher mit Echtzeit-KI-Leistung kombiniert. Ideal für KI-Projekte wie Vision und Automatisierung – ideal für Entwickler, Robotikhersteller und Edge-KI-Lerner
Das Dual NVMe Raft kommt mit allem, was Sie brauchen: 2 PCIe FPC-Kabel, SSD-Befestigungsschrauben, Kupfersäulen und eine übersichtliche Installationsanleitung (evtl. nicht in deutscher Sprache). Mit Schritt-für-Schritt-Anleitungen und Online-Tutorials ist die Einrichtung schnell und anfängerfreundlich
Holen Sie sich Hilfe, wenn Sie sie brauchen – SunFounder bietet detaillierte Tutorials, Online-Dokumentation und aktive Community-Foren, die Sie durch jeden Schritt führen. Egal, ob Sie ein Anfänger oder ein fortgeschrittener Hersteller sind, unser Team ist hier, um Ihren Projekterfolg zu unterstützen
25,99 € AUF AMAZON
Geekworm
Geekworm X1005 Dual NVMe SSD Shield Bottom for Raspberry Pi 5, Supports Hailo-8 AI Accelerator
Kostenloser Versand
88
HOHE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#5
▼ Mehr anzeigen
▲ Weniger anzeigen
【Compatibility】Raspberry Pi 5 Dual NVMe Hat only compatible with Raspberry Pi 5, Model: X1005
【Support Dual M2 NVMe SSD with multiple length】Support M.2 KEY-M NVMe SSD 2230/2242/2260/2280 length installation. Comes with SSD copper pillar for 2230/2242/2260 SSD installation
【 Raspberry Pi 5 AI Hat Extension】 Supports Hailo AI acceleration module built around the Hailo-8L chip from Raspberry Pi AI Kit
【 Support NVMe Boot】 Supports NVMe boot with eeprom 2024/05/17 and later version
【How to Power】 5Vdc +/-5% power via GPIO pin header and FFC, converted to 3.3V max 3A to power the SSD; Recommend to use Geekworm PD 27W power adapter (ASIN:B0CP8SRXSC) or (ASIN:B0CZCZF2QV)
【Packing List】1 x X1005 PCIe Peripheral Board, 2x 37mm PCIe FFC Cable(One as backup), 1x Screws Pack
【Matching Case (NOT include)】Refer to P580-V2 Case (ASIN: B0D99HVX3C). NOT compatible with P580!
38,00 € AUF AMAZON
GeeekPi
GeeekPi N21 Dual NVMe SSD Shield Bottom for Raspberry Pi 5, Supports Hailo-8 AI Accelerator, N21 Dual 2280 NVMe Base, Support Two 2230/2242/2260/2280 NVMe SSDs
20% Rabatt
Kostenloser Versand
81
GUTE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#6
▼ Mehr anzeigen
▲ Weniger anzeigen
Compatibility: GeeekPi N21 Dual NVMe SSD Shield Bottom only compatible with Raspberry Pi 5
Support Dual M.2 NVMe SSD with multiple length: Support M.2 M-Key NVMe SSD 2230/2242/2260/2280 length installation. Comes with SSD copper pillar for 2230/2242/2260 SSD installation
Raspberry Pi 5 AI Hat Extension: Supports Hailo AI acceleration module built around the Hailo-8L chip from Raspberry Pi AI Kit
Support NVMe Boot: Supports NVMe boot with eeprom 2024/05/17 and later version
How to Power: 5Vdc +/-5% power via GPIO pin header and FFC, converted to 3.3V max 3A to power the SSD; Recommend to use GeeekPi PD 27W power adapter (ASIN: B0CQ1Q18HX)
27,98 € AUF AMAZON
GeeekPi
GeeekPi N20 Dual M.2 NVMe SSD Shield PCIe Peripheral Board for Raspberry Pi 5, Support Dual M.2 M-Key NVMe SSD 2242
21% Rabatt
Kostenloser Versand
79
GUTE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#7
▼ Mehr anzeigen
▲ Weniger anzeigen
【Compatibility】GeeekPi N20 Dual 2242 NVMe HAT is only for Raspberry Pi 5 8GB / 4GB / 2GB / 1GB, also compatible with the Raspberry Pi 5 official active cooler or GeeekPi Armor Lite V5 Cooler, Please noted, the M.2 NVMe 2242 SSD,Active Cooler and Raspberry Pi 5 Board are not included!
【Support Dual M.2 SSD】GeeekPi N20 Dual 2242 NVMe HAT Supports the installation of two M.2 M-Key NVMe 2242 SSDs.
【How to Power】5Vdc +/-5%, 5A via Raspberry Pi 5. Recommend to use GeeekPi PD 27W Power Adapter (ASIN: B0CQ1Q18HX)
【Support NVMe Boot】GeeekPi N20 Dual 2242 NVMe HAT now supports NVMe boot with the latest eeprom (2024/05/17 version)
【Note】Since N20 is using ASMedia ASM1182e PCIe switch, it can't support PCIe Gen 3 speed, so even though we forced to turn on PCIe Gen 3.0 setting in Raspberry Pi 5, it is limited by ASMedia ASM1182e PCIe switch. speed is still PCIe Gen 2.0 speed.
23,73 € AUF AMAZON
ZDE
ZDE ZP519 PCIe to Dual M.2 HAT Key M NVMe SSD Shield PCIe Peripheral Board Solid State Drive Adapter Board for Raspberry Pi 5 Support M.2 NVMe SSD 2230 2242 2260 2280
Kostenloser Versand
76
GUTE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#8
▼ Mehr anzeigen
▲ Weniger anzeigen
Dual M.2 NVMe SSDs Supported: ZP519 PCIe to Dual M.2 HAT Key-M NVMe SSD expansion board supports the installation of two M.2 Key-M NVMe SSDs in 2230/2242/2260/2280 length, high-speed reading/writing; supports boot from NVMe SSD.
Compatibility: This PCIe to Dual M.2 HAT NVMe kit is only compatible with Raspberry Pi 5 2GB/4GB/8GB/16GB SBC.
How to Power: Power the adapter directly from the PCIe FPC ribbon cable. Also, with 40pin GPIO header, the board can automatically supply power from GPIO, avoiding the problem of insufficient power supply for ultra-large capacity of SSDs.
Cooling Solution: The ZP519 shield supports the installation of official Pi 5 Active Cooler (Not Included) and there is a reserved airflow vent for the cooling fan, providing excellent heatsink for Raspberry Pi 5 and SSD.
Practical Accessories: Comes with 2pcs M2 studs for 2230/2242/2260/2280 SSD installation, no soldering required.
27,99 € AUF AMAZON
GeeekPi
GeeekPi U2500 M.2 NVME Dual USB3.0 to 2.5G Ethernet Adapter for Raspberry pi 5, Support M.2 NVMe M-Key 2230/2242 SSD
16% Rabatt
Kostenloser Versand
75
GUTE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#9
▼ Mehr anzeigen
▲ Weniger anzeigen
PCIe Interface Support --- It includes a single PCIe (Peripheral Component Interconnect Express) interface that can be used to expand the system with an M.2 NVMe SSD. This allows for high-speed storage solutions that are compatible with the 2230 and 2242 form factors.
M.2 NVMe SSD Support --- The HAT board supports M.2 NVMe Solid State Drives, which are known for their high-speed data transfer rates and low latency. This is particularly useful for applications that require fast access to data, such as databases, media servers, and high-performance computing tasks.
USB to Ethernet Conversion --- It cleverly utilizes two USB 3.0 ports, converting them into two Gigabit Ethernet interfaces. This provides the Raspberry Pi with additional network connectivity options, which can be beneficial for network-intensive applications, such as web servers, media streaming, or IoT (Internet of Things) projects.
Compact and Integrated Design --- The board is designed to be compact and integrate seamlessly with the Raspberry Pi, providing a clean and efficient setup without the need for additional cables or adapters.
Enhanced Functionality --- By combining high-speed storage and network capabilities, this HAT board significantly enhances the functionality of a Raspberry Pi, making it suitable for a wide range of applications that require both storage and network performance.
41,98 € AUF AMAZON
GeeekPi
GeeekPi Dual FPC PCIe HAT for Raspberry Pi 5, B12 HAT 1 to 2 PCIe Interface with 40Pin GPIO Pin Header for Raspberry Pi 5
Kostenloser Versand
69
GUTE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#10
▼ Mehr anzeigen
▲ Weniger anzeigen
【Dual PCIe Expansion】Effortlessly expand your Raspberry Pi 5's FPC PCIe interface into two, providing users with the convenience of connecting multiple PCIe devices simultaneously for increased productivity and versatility.
【Daisy-Chaining Capability】Connect multiple B12 units in a cascading fashion to create a multi-tiered PCIe configuration, allowing for expanded connectivity options and customized setups tailored to your specific needs.
【Enhanced Connectivity】Unlock the potential to connect a wide range of PCIe devices, such as SSDs, GPUs, network cards, and more, expanding the capabilities of your Raspberry Pi 5 for diverse applications and projects.
【Robust and Reliable Design】Built with quality and durability in mind, the B12 Raspberry Pi HAT ensures stable and reliable performance, providing a dependable solution for your PCIe expansion needs.
【Dual Board Expansion】This feature allows for the connection of two additional Pineberry Pi boards, providing users with the flexibility to expand their projects' scope and functionality.
25,99 € AUF AMAZON
raspberry pi 5 dual nvme hat
raspberry pi 5 hat nvme
raspberry pi 5 nvme hat
raspberry pi 5 dual nvme
raspberry pi 5 case nvme hat
raspberry pi 5 nvme hat gehäuse
raspberry pi 5 nvme hat poe
raspberry pi 5 poe hat nvme
raspberry pi 5 poe nvme hat
nvme raspberry pi 5
#1 GEWINNER
