Raspberry Pi 5 Grafikkarte
Die 10 besten Produkte von Dezember 2025
Letzte Aktualisierung:
8. Dezember 2025
Geekworm
Geekworm X1001 PCIe to M.2 NVMe Key-M SSD Shield for Raspberry Pi 5
Kostenloser Versand
99
MAXIMALE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#1 GEWINNER
▼ Mehr anzeigen
▲ Weniger anzeigen
【Compatibility】Only for Raspberry Pi 5 16GB / 8GB / 4GB (NOT included)
【Matching Case (NOT included)】P579 (ASIN: B0CRB3DT5M); Or P579 Case with Official Active Cooler (ASIN: B0CT4P893Q)
【M2 Key-M NVMe SSD Supported】Support M.2 KEY-M NVMe SSD 2230/2242/2260/2280 length installation.【IMPORTANT】DON'T use NVMe SSD with Phison controller, please refer to: https://wiki.geekworm.com/X1001#Important_Notes
【How to Power】Use 5Vdc +/-5%, 5A to power via Raspberry Pi 5, and Pi 5 will power X1001 via FFC PCIe ribbon. Recommend to use Geekworm PD 27W power adapter (ASIN: B0FGPSRQ75 / B0CZCZF2QV / B0CP8SRXSC)
【Packing List】1 x X1001 Shield, 1x Accessories Pack
12,93 € AUF AMAZON
FREENOVE
Freenove Breakout Board for Raspberry Pi 5 / 4B / 3B+ / 3B / 3A+ / 2B / 1B+ / 1A+ / Zero 2 W/Zero W/Zero, Terminal Block Shield HAT with Pin Header, GPIO Status LED
Kostenloser Versand
97
BESTE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#2
▼ Mehr anzeigen
▲ Weniger anzeigen
Compatible Models: Raspberry Pi 5 / 4B / 3B+ / 3B / 3A+ / 2B / 1B+ / 1A+ / Zero 2 W / Zero W / Zero (Note: NOT compatible with 500 / 400)
GPIO Status LED: LED on if GPIO outputs / inputs high level, LED off if GPIO outputs / inputs low level
Independent LED: The status LED is driven by the chip instead of the GPIO so the GPIO will not be affected
Terminal Block and Header: Connect to all pins of Raspberry Pi's 40-pin GPIO header, 2.54 mm (0.1 inch) pitch
Pin Name: The BCM numbering name of each pin is printed next to it
11,95 € AUF AMAZON
RASPIAUDIO
RASPIAUDIO Audio DAC Hat Sound Card (Audio+V3) for Raspberry PI5 / PI4 / Pi Zero / PI3 / PI3B / PI3B+ / Better Quality Than USB
Kostenloser Versand
93
TOP QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#3
▼ Mehr anzeigen
▲ Weniger anzeigen
Stereo-Audioausgang: 3,5mm Klinke und RCA, ideal für Kopfhörer und Line-Level.
Universelle Kompatibilität: Funktioniert mit Raspberry Pi 5, 4, Zero v2 und früheren Versionen (Pi 3, 2, Zero v1).
Außergewöhnliche Leistung: DAC mit einer außergewöhnlichen Abtastrate von PCM 32 Bit 384kHz und einem Signal-Rausch-Verhältnis von 112 dB.
Einsatzbereit: Keine Treiberinstallation erforderlich dank des neuen EEPROM-Chips, plug and play.
Attraktives Design: Farbige und ästhetische Leiterplatte für Ihre Projekte.
24,90 € AUF AMAZON
CUQI
CUQI Raspberry Pi Display, 3,5 Zoll Touchscreen mit Raspberry Pi 5 Gehäuse, 480x320 TFT LCD 60 FPS Monitor mit Mini Lüfter und Kühlkörper
Kostenloser Versand
91
HOHE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#4
▼ Mehr anzeigen
▲ Weniger anzeigen
Der 3,5-Zoll-Touchscreen wird mit einem speziellen Gehäuse für den Raspberry Pi 5 geliefert, das sowohl den Touchscreen als auch den Raspberry Pi 5 aufnehmen kann, wodurch eine perfekte Kombination aus Touchscreen und Raspberry Pi 5 erreicht wird.
480 x 320 Auflösung, 60 FPS Bildwiederholrate für Raspberry Pi, unterstützt 125 MHz SPI-Signaleingang, stabile Display ohne Flackern. (Hinweis: Der 3,5"-Touchscreen ist für Raspberry Pi 4 und Raspberry Pi 5 erhältlich, das Gehäuse jedoch nur für Raspberry Pi 5.)
Kommen Sie mit Mini-Lüfter und Kühlkörper, stellen Sie sicher, dass Ihr Raspberry Pi 5 stabil arbeitet, um die beste Wärmeableitung zu erreichen, Sie müssen sich keine Sorgen um die Wärmeableitung machen.
Kompatibel mit Raspbain-, Ubuntu-, Kali- und RetroPie-Systemen, kostenlose Treiberinstallation und Tutorials werden bereitgestellt, bitte lesen Sie das elektronische Handbuch für Details. Raspberry Pi 5 bietet derzeit nur Raspbian System, wenn Sie ein anderes System installieren möchten, kontaktieren Sie uns bitte.
Zum Lieferumfang gehören: 3,5-Zoll-Touchscreen, Gehäuse für Raspberry Pi 5, Stift, Schraubendreher, Gummifüße, Schrauben, Metallstreben und Mini-Lüfter.
24,99 € AUF AMAZON
GeeekPi
GeeekPi Raspberry Pi 5 Gehäuse mit Official Active Cooler, Support PCIe M.2 NVMe SSD Shield Top X1001 / X1000 / N04 / N05
15% Rabatt
Kostenloser Versand
85
SICHERE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#5
▼ Mehr anzeigen
▲ Weniger anzeigen
【Compatibility】① Support Raspberry Pi 5 with PCIe M.2 NVMe Shield TOP like N04 (ASIN: B0CTLX5MW5), N05 (ASIN: B0CTLT39Y3) ②Support separate Raspberry Pi 5 8GB / 4GB Motherboard ③ Support Official Raspberry Pi 5 Active Cooler, for N04 Kit, ASIN: B0CXPBQK7F, for Pi5 8GB with N04 Starter Kit,ASIN: B0D1QQ174C
【Official Raspberry Pi 5 Active Cooler Included】The Raspberry Pi Active Cooler for Raspberry Pi 5 is a dedicated clip-on cooling solution for Raspberry Pi 5. It combines an aluminium heatsink with a temperature-controlled blower fan to keep your Raspberry Pi 5 at a comfortable operating temperature, even under heavy loads.
【Robust and Portable】This Raspberry Pi 5 Metal Case is made of High-Quality iron material, can provide a strong and durable protection for your Raspberry Pi 5 Board.
【Easy Access to all Ports】GeeekPi Raspberry Pi 5 Case can accurately access usb-c power jack, micro HDMI ports, usb ports, Ethernet jack, sd card slot, power button, 4-lane MIPI DSI/CSI connectors and so on.
【Package Includes】1x Metal Case for Raspberry Pi 5, 1x Official Raspberry Pi 5 Active Cooler; 1x Screws Pack,1x 4pcs Rubber Pads; 1x Screwdriver. Please noted: The Raspberry Pi Board is not included in the package.
21,23 € AUF AMAZON
GeeekPi
GeeekPi Mini Tower Kit für Raspberry Pi 5: Raspberry Pi 5 Gehäuse mit Ice Tower Cooler, 0.96'' OLED Modul, RGB Lüfter, GPIO 1 bis 2 Erweiterungsboard
23% Rabatt
Kostenloser Versand
80
GUTE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#6
▼ Mehr anzeigen
▲ Weniger anzeigen
【Compatiblity】GeeekPi Mini Tower Kit is designed for Raspberry Pi 5 8GB 4GB. Note: This Mini Tower case isn't compatible with N07 PCIe M.2 M-Key NVMe SSD PCIe Peripheral Bottom Board. For N07 Mini Tower NVME NAS Kit, please refer to ASIN B0DDWLBPSY, Mini Tower Kit with 27W Power Adapter, please refer to the ASIN: B0CW9DHY8S
【0.96 OLED Screen】Integrated with a small OLED screen for displaying system status information, such as temperature, CPU usage, and more.
【ICE Tower Cooler with LED Fan】Equipped with an efficient ICE Tower Cooler to effectively lower the temperature of the Raspberry Pi 5, enhancing performance and stability. The fan comes with automatically flashing LED lights, adding a visual flair. Note that these LED lights may not be programmatically turned off.
【Acrylic Panels】Two acrylic panels on the sides add a touch of sophistication to the entire system while offering a clear view of internal components. Please noted, there is a sticker on the acrylic panels that protects it from scratches during transport. You just have to peel it off before installing the case.
【4Pin JST Interface】The fan supports system speed control, connecting to the Raspberry Pi 5 mainboard through a 4Pin JST interface for adaptable cooling based on varying heat dissipation needs.
【Wiki】https://wiki.52pi.com/index.php?title=ZP-0172
28,48 € AUF AMAZON
GeeekPi
GeeekPi 3,5-Zoll-HDMI-Touchscreen mit Gehäuse für Raspberry Pi 5, mit offiziellem Pi5 Aktivkühler, 320x480 TFT-LCD-Display
16% Rabatt
Kostenloser Versand
81
GUTE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#7
▼ Mehr anzeigen
▲ Weniger anzeigen
【Display für Raspberry Pi】3,5-Zoll-Touchscreen, kompatibel mit Raspberry Pi 3/4/5, funktioniert perfekt mit Raspberry Pi und ist die beste Wahl für Raspberry Pi Display. Bitte beachten Sie, dass der 3,5-Zoll-Resistiv-Touchscreen direkt in jede Version der Raspberry Pi-Boards eingesteckt werden kann, das ABS-Gehäuse jedoch nur mit dem Raspberry Pi 5 kompatibel ist.
【Mini-Bildschirm】3,5-Zoll-Mini-Bildschirm, 480 x 320 Pixel, 60FPS, mit Stylus, perfekt für kleine Projekte. Der Bildschirm unterstützt bis zu 60FPS, aber der SPI des Raspberry Pi unterstützt nur 50FPS, und der HDMI-Anschluss kann 60FPS unterstützen.
【Mit offiziellem Pi 5 Active Cooler】Der Pi 5 Active Cooler kombiniert einen Aluminiumkühlkörper mit einem PWM-Lüfter, um die optimale Betriebstemperatur Ihres Raspberry Pi 5 aufrechtzuerhalten und so eine zuverlässige Leistung für verschiedene Anwendungen zu gewährleisten.
【Weitgehende Kompatibilität】Kompatibel mit Raspbain, Ubuntu und RetroPie Systemen, Raspberry Pi 5 bietet derzeit nur Raspbian System, Bitte beachten Sie, dass der 3,5-Zoll-Bildschirm nur mit unserem vorkompilierten System funktioniert. Bei anderen Systemen kann es zu Anzeigeproblemen kommen.Informationen zur Treiberinstallation und Tutorials finden Sie hier:https://mega.nz/folder/6uR0SYLS#t4DJRQLX6F-Uv-i7jCaCKQ
【Lieferumfang】Ein ABS-Gehäuse für Raspberry Pi 5, ein 3,5-Zoll-TFT-LCD-Display, Ein Touchpen und ein offizieller Aktivkühler für Raspberry Pi 5. HINWEIS: Raspberry Pi-Board NICHT enthalten!
30,22 € AUF AMAZON
GeeekPi
GeeekPi Starter Kit für Raspberry Pi 5 8GB, mit N04 M.2 NVMe SSD PCIe Peripheriekarte, Metallgehäuse, offiziellem aktiven Kühler, 64GB SD Karte und Kartenleser, HDMI Kabel, 27W USB C 5.1V 5A Netzteil
24% Rabatt
Kostenloser Versand
78
GUTE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#8
▼ Mehr anzeigen
▲ Weniger anzeigen
【Pi 5 Single-board Computer Included 】Includes Pi 5 8GB with ARM Cortex-A76 CPU clocked at 2.4GHz, and VideoCore VII GPU clocked at 800MHz. These increase the performance up to 2 to 3 times faster than Raspberry Pi 4 Model B!
【N04 M.2 NVMe to PCIe Adapter Included】N04 M.2 NVMe to PCIe Adapter is designed for the latest Raspberry Pi 5. It supports the installation of NVMe (M-key) drives in M.2 format sizes 2230, 2242, 2260 and 2280. Extra custom CNC SSD mount screw, no soldering required.
【High Quality Pi5 Case】This Pi 5 Case is made of High-Quality Metal material, can provide a strong and durable protection for your Raspberry Pi 5 Board, and it can accurately access most ports of Raspberry Pi board, including usb-c power jack, micro HDMI ports, usb ports, Ethernet jack, sd card slot, power button, and GPIO Slot.
【Pi 5 Active Cooler Included】Official Pi 5 Active Cooler combines an aluminium heatsink with a PWM fan to keep your Raspberry Pi 5 maintain optimal operating temperatures, ensuring reliable performance for various applications.
【High Quality Power Supply】5.1V 5A 27W USB C power Supply is designed for Raspberry Pi 5 board. The power adapter is equipped with Power Delivery technology, allowing for fast and efficient charging of compatible devices. It also offers a variety of output voltage options, including 5.1V at 5A, 9.0V at 3.0A, 12.0V at 2.25A, and 15.0V at 1.8A, providing flexibility for different device requirements.
159,99 € AUF AMAZON
GeeekPi
GeeekPi N20 Dual M.2 NVMe SSD Shield PCIe Peripheral Board for Raspberry Pi 5, Support Dual M.2 M-Key NVMe SSD 2242
21% Rabatt
Kostenloser Versand
72
GUTE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#9
▼ Mehr anzeigen
▲ Weniger anzeigen
【Compatibility】GeeekPi N20 Dual 2242 NVMe HAT is only for Raspberry Pi 5 8GB / 4GB / 2GB / 1GB, also compatible with the Raspberry Pi 5 official active cooler or GeeekPi Armor Lite V5 Cooler, Please noted, the M.2 NVMe 2242 SSD,Active Cooler and Raspberry Pi 5 Board are not included!
【Support Dual M.2 SSD】GeeekPi N20 Dual 2242 NVMe HAT Supports the installation of two M.2 M-Key NVMe 2242 SSDs.
【How to Power】5Vdc +/-5%, 5A via Raspberry Pi 5. Recommend to use GeeekPi PD 27W Power Adapter (ASIN: B0CQ1Q18HX)
【Support NVMe Boot】GeeekPi N20 Dual 2242 NVMe HAT now supports NVMe boot with the latest eeprom (2024/05/17 version)
【Note】Since N20 is using ASMedia ASM1182e PCIe switch, it can't support PCIe Gen 3 speed, so even though we forced to turn on PCIe Gen 3.0 setting in Raspberry Pi 5, it is limited by ASMedia ASM1182e PCIe switch. speed is still PCIe Gen 2.0 speed.
23,73 € AUF AMAZON
GeeekPi
GeeekPi Retro Gaming Gehäuse für Raspberry Pi 5, ABS Gehäuse mit Armor Lite V5 Kühlkörper Lüfter für Raspberry Pi 5, kompatibel mit Active Cooler
Kostenloser Versand
69
GUTE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#10
▼ Mehr anzeigen
▲ Weniger anzeigen
【Compatiblity】GeeekPi Retro Gaming Game5Pi Case with Armor Lite V5 Active Cooler is specifically designed for Raspberry Pi 5. and this case also supports installation of Official Raspberry Pi 5 Active Cooler, For 3B/3B+ Version, ASIN:B08GC781R2, For Game5Pi Nvme Case, refer to ASIN: B0DL5PGDNJ
【Easy access to all ports】The Raspberry Pi 5 ABS Case consists of two parts and there is no need to screw the case, just cover them tightly; It can be access to all ports of Raspberry Pi 5 Board, such as GPIO port, HDMI port, USB port, Card slot
【High Quality Pi5 Case with NES style】The Raspberry Pi 5 Game5Pi Case is made of High Quality ABS material,long-lasting use,and providing a strong and durable protection for your Raspberry Pi. It can make your Raspberry Pi 5 become a NES retro gaming machine in one second!
【Dual Fan for Better Cooling System】Built-in 3510 fan on the side of the Case, and also come with Armor Lite V5 Active Cooler, can lower the temperature of Raspberry Pi Board quickly,the Armor Lite V5 cooler fan can be controlled via PWM. The official Raspberry Pi operating system supports the speed adjustment function.
【Package Includes】1x Retro Gaming Game5Pi Case Built-in 3510 fan; 1x Armor Lite V5 Active Cooler; 1x Screws Pack; 1x Screwdriver. Please noted: The Raspberry Pi Board is not included in the package.
16,99 € AUF AMAZON
raspberry pi 5 grafikkarte adapter
raspberry pi 5
raspberry pi 5 mining
raspberry pi 5 x86
pcie raspberry pi 5
raspberry pi 5 audio
raspberry pi 5 gameboy
raspberry pi 5 pcie
akku raspberry pi 5
raspberry pi 5 akku