main logo

Raspberry Pi 5 Festplatte Adapter

Die 10 besten Produkte von Dezember 2025
Letzte Aktualisierung: 8. Dezember 2025
Geekworm
Geekworm
Geekworm X1001 PCIe to M.2 NVMe Key-M SSD Shield for Raspberry Pi 5
Kostenloser Versand
star

98

MAXIMALE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#1 GEWINNER

  • 【Compatibility】Only for Raspberry Pi 5 16GB / 8GB / 4GB (NOT included)
  • 【Matching Case (NOT included)】P579 (ASIN: B0CRB3DT5M); Or P579 Case with Official Active Cooler (ASIN: B0CT4P893Q)
  • 【M2 Key-M NVMe SSD Supported】Support M.2 KEY-M NVMe SSD 2230/2242/2260/2280 length installation.【IMPORTANT】DON'T use NVMe SSD with Phison controller, please refer to: https://wiki.geekworm.com/X1001#Important_Notes
  • 【How to Power】Use 5Vdc +/-5%, 5A to power via Raspberry Pi 5, and Pi 5 will power X1001 via FFC PCIe ribbon. Recommend to use Geekworm PD 27W power adapter (ASIN: B0FGPSRQ75 / B0CZCZF2QV / B0CP8SRXSC)
  • 【Packing List】1 x X1001 Shield, 1x Accessories Pack
  • 12,93 € AUF AMAZON
Miuzei
Miuzei
Miuzei Metallgehäuse case für Raspberry Pi 5, 1 Schrauben Montage, Kompatibel mit M.2 NVMe SSD Adapter X1001/X1003/N04/N05 und Active Cooler, für Raspberry Pi 5 Only
Kostenloser Versand
star

98

MAXIMALE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#2

  • Kompatibel mit marktführenden M.2 NVMe SSD-Adapterplatten inklusive X1001/X1003/N04/N05,unterstützt alle Formate 2280 bis 2230.10mm vertikaler Bauraum SSD-PCB und Deckel ideal für Kühlkörper und Wärmeleitpad, kompatibel mit Raspberry Pi 5 in 2GB/4GB/8GB/16GB
  • Original Raspberry Pi 5 Kühler mit voller Dritthersteller Kompatibilität：Plug-and-Play für offiziellen Aktivkühler (ohne Zusatzmodule), FPC-Kabellänge bei Drittanbietern auf 50-70mm optimiert (über 70mm Lüfterblockade-Risiko). 4x16mm Abstandsschrauben ermöglichen 4mm SSD-Lüfterabstand (+83% Kühlleistung vs. Standarddesign). Unterstützt Miuzei-Kühlungslösungen wie ASIN B0CTMFH133 (separat erhältlich).
  • Einzelschrauben Quick Release & 3mm Ultra-Schmalrahmen：In nur 1 Sekunde kann die Demontage durchgeführt werden, was ideal für häufige Hardware-Updates oder Laborexperimente ist.Ultra-schmaler Rahmendesign, das den 63mm Arbeitsbereich maximiert und den unbehinderten Betrieb gewährleistet.
  • Flächenbündige Interface-Integration：Perfekte Passform ohne Vertiefungen – Kontaktstörungen werden effektiv vermieden durch,Laserkalibrierte Anschlussausrichtung (HDMI/USB-C/Ethernet)，Vorbereitet für Power-Button und SD-Kartenanschluss zur Verbesserung der Benutzerfreundlichkeit.
  • Vollständiges Zubehör – sofort einsatzbereit：Enthalten: 1x Metallgehäuse; 1x Schraubendreher ; 4x dampfende Gummifuße; 4x Schraubenstützen (siehe Anleitung).Nicht enthalten: Kühlkörper; NVMe-Adapter; M.2 SSD; Raspberry Pi 5 Mainboard (separat erhältlich).
  • 10,99 € AUF AMAZON
GeeekPi
GeeekPi
GeeekPi Armor Gehäuse mit CN01 M.2 M-Key PCIe 3.0 Adapter für Raspberry Pi 5, unterstützt M.2 NVMe SSD 2230/2242/2260/2280
Kostenloser Versand
star

96

BESTE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#3

  • CN01 M.2 M-key PCIe 3.0 x1 Expansion Board für Raspberry Pi 5: Unterstützt M.2 NVMe SSDs in 2230, 2242, 2260 und 2280 Formfaktoren; bietet eine direkte PCIe-Schnittstelle für High-Speed-Datenübertragung; Utilizes ein FPC-Kabel (flexibler Printed Circuit) Sicher und flexibel. ction to the Raspberry Pi 5's PCIe slot
  • Raspberry Pi 5 Armor Case: Custom designed for the Raspberry Pi 5; ensuring a snug fit and comprehensive protection
  • Verbesserte Kühlung: Enthält ein hochwertiges thermisches Pad für effiziente Wärmeableitung von SSD; die Aluminiumwärmedämpfung auf dem Erweiterungsbrett hilft bei optimaler Betriebstemperatur
  • Einfache Installation: Einfache Plug-and-Play-Installation mit klaren Anweisungen für hassle-freie Installation; entworfen für benutzerfreundliche Montage, auch mit begrenztem technischem Fachwissen
  • Performance-Improvement: Die Fähigkeit, die SSD zu boot signifikant zu verringern, Startup Zeiten und die Gesamtleistung des Systems zu erhöhen
  • 25,99 € AUF AMAZON
Waveshare
Waveshare
Waveshare PCIe to 2-Ch SATA Adapter for Raspberry Pi 5, Supports SATA Hard Drive Protocol, Onboard Dual LED Indicators and EEPROM, HAT + Standard, Driver-Free, Plug and Play
star

92

TOP QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#4

  • PCIe TO 2-CH SATA HAT+: Designed For Raspberry Pi 5, Driver-Free, Plug And Play
  • Connecting To Pi 5 Via 16PIN Cable: Based On 16PIN PCIe Interface Of Raspberry Pi 5
  • SATA Hard Drive Protocol: Dual-Channel SATA Interfaces, Compliant With SATA Gen3 Standard
  • PCIe To 2-Ch High-Speed SATA 3.0: Compliant With SATA 3.0 (SATA Gen3) And PCIe Gen2 Standards
  • SATA Drive Slot Support. Onboard Dual LED Indicators: Easy To Monitor The Working Status. Onboard EEPROM: For Saving HAT ID And Product Information
  • 26,99 € AUF AMAZON
Geekworm
Geekworm
Geekworm X1004 Dual M.2 NVMe SSD Shield PCIe Peripheral Board for Raspberry Pi 5
Kostenloser Versand
star

86

SICHERE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#5

  • 【Compatibility】only for Raspberry Pi 5 16GB / 8GB / 4GB (NOT included)
  • 【Support Dual M2 SSD】Compatible with M.2 KEY-M NVMe SSD 2280 (NOT included)
  • 【How to Power】5Vdc +/-5%, 5A via Raspberry Pi 5. Recommend to use Geekworm PD 27W power adapter (ASIN: B0CP8SRXSC); or GaN PD 27W power supply (ASIN: B0CZCZF2QV)
  • 【Support NVMe Boot】X1004 now supports NVMe boot with the latest eeprom (2024/05/17 version)
  • 【Packing List】1 x X1004 PCIe to M2 NVMe Shield, 1x Accessories Pack
  • 【Matching Case (NOT included)】Refer to P579-V2 Case (ASIN: B0CRB3DT5M), or P579-V2 Case with active cooler (ASIN: B0CT4P893Q)
  • 【Note】Since X1004 is using ASMedia ASM1182e PCIe switch, it can't support PCIe Gen 3 speed, so even though we forced to turn on PCIe Gen 3.0 setting in Raspberry Pi 5, it is limited by ASMedia ASM1182e PCIe switch. speed is still PCIe Gen 2.0 speed.
  • 38,50 € AUF AMAZON
FREENOVE
FREENOVE
Freenove M.2 NVMe Adapter for Raspberry Pi 5 (with 256GB SSD), M.2 HAT Add-on Board, Solid State Drive, PCIe 2.0/3.0, Tested Speed 800 MB/s
Kostenloser Versand
star

81

GUTE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#6

  • Big Upgrade: Boost your system to an amazing speed by upgrading memory card (usually read: 100 MB/s, write: 10 MB/s) to SSD (PCIe 2.0: read: 419 MB/s, write: 253 MB/s; PCIe 3.0: read: 804 MB/s, write: 404 MB/s. Tested with this SSD on Raspberry Pi 5)
  • Comes with 256GB SSD: M.2 interface, NVMe protocol, PCIe 2.0 or 3.0, size 2280 (The write speed of SSD is much faster than that of memory card)
  • Two Uses: Used as system disk or regular hard drive, provide detailed tutorial (The download link can be found on the product box) (No paper tutorial)
  • Easy to Use: Just tighten the screws and connect the ribbon cable to install it on the bottom (Simple configuration needed, please refer to tutorial)
  • Compatible Models: Raspberry Pi 5 only (Note: NOT compatible with any other models)
  • 36,95 € AUF AMAZON
GeeekPi
GeeekPi
GeeekPi Metal Gehäuse mit N04 PCIe M.2 Key-M NVMe SSD PCIe Peripheral Board für Raspberry Pi 5,mit Raspberry Pi 5 Official Active Cooler,Support M.2 NVMe SSD 2230 2242 2260 2280
16% Rabatt Kostenloser Versand
star

80

GUTE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#7

  • 【Compatibility】This kit includes a metal case and a N04 M.2 Key-M NVMe SSD PCIe Peripheral Board,and an official active cooler, It is compatible with the latest Raspberry Pi 5 4GB/8GB and Supports M.2 NVMe SSD 2230 2242 2260 2280. with 27W Power Supply Kit, ASIN: B0CXPBQK7F.
  • 【Access to all Ports】GeeekPi Raspberry Pi 5 Case can accurately access most ports of Raspberry Pi board, including usb-c power jack, micro HDMI ports, usb ports, Ethernet jack, sd card slot, power button, and GPIO Slot.
  • 【N04 M.2 NVMe to PCIe Adapter】N04 M.2 NVMe to PCIe Adapter is designed for the latest Raspberry Pi 5. It supports the installation of NVMe (M-key) drives in M.2 format sizes 2230, 2242, 2260 and 2280. Extra custom CNC SSD mount screw, no soldering required.
  • 【Raspberry Pi 5 Active Cooler Included】Raspberry Pi 5 Active Cooler combines an aluminium heatsink with a PWM fan to keep your Raspberry Pi 5 maintain optimal operating temperatures, ensuring reliable performance for various applications.
  • 【Packing List】1x Metal Case for Raspberry Pi 5, 1x N04 PCIe M.2 Key-M NVMe SSD PCIe Peripheral Board, 1x Pi5 Active Cooler, 1x FPC Cable, 1x Screwdriver, 1x Screw Pack
  • 33,58 € AUF AMAZON
FREENOVE
FREENOVE
Freenove M.2 NVMe Adapter V2 for Raspberry Pi 5 (Without SSD), M.2 HAT Add-on Board, Solid State Drive Size 2230 2242 2260 2280, PCIe 2.0/3.0, Max Speed 1231 MB/s
Kostenloser Versand
star

77

GUTE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#8

  • Big Upgrade: Boost your system to an amazing speed by upgrading memory card (SDR104: 104 MB/s max) to SSD (PCIe 2.0: 500 MB/s max, PCIe 3.0: 1231 MB/s max) (Note: The max speed is declared by the Raspberry Pi documentation, usually unable to achieve)
  • Compatible SSDs: M.2 NVMe SSDs, PCIe 2.0 or 3.0, size 2230 / 2242 / 2260 / 2280 (Note: NOT compatible with M.2 SATA SSDs)
  • Two Uses: Used as system disk or regular hard drive, provide detailed tutorial (The download link can be found on the product box) (No paper tutorial)
  • Easy to Use: Just tighten the screws and connect the ribbon cable to install it on the top or bottom (Simple configuration needed, please refer to tutorial)
  • Compatible Models: Raspberry Pi 5 only (Note: NOT compatible with any other models)
  • 9,95 € AUF AMAZON
FREENOVE
FREENOVE
Freenove M.2 NVMe Adapter for Raspberry Pi 5 (with 128GB SSD), M.2 HAT Add-on Board, Solid State Drive, PCIe 2.0/3.0, Tested Speed 800 MB/s
Kostenloser Versand
star

70

GUTE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#9

  • Big Upgrade: Boost your system to an amazing speed by upgrading memory card (usually read: 100 MB/s, write: 10 MB/s) to SSD (PCIe 2.0: read: 419 MB/s, write: 253 MB/s; PCIe 3.0: read: 804 MB/s, write: 404 MB/s. Tested with this SSD on Raspberry Pi 5)
  • Comes with 128GB SSD: M.2 interface, NVMe protocol, PCIe 2.0 or 3.0, size 2280 (The write speed of SSD is much faster than that of memory card)
  • Two Uses: Used as system disk or regular hard drive, provide detailed tutorial (The download link can be found on the product box) (No paper tutorial)
  • Easy to Use: Just tighten the screws and connect the ribbon cable to install it on the bottom (Simple configuration needed, please refer to tutorial)
  • Compatible Models: Raspberry Pi 5 only (Note: NOT compatible with any other models)
  • 25,95 € AUF AMAZON
GeeekPi
GeeekPi
GeeekPi 19 Zoll 1U Rack-Halterung für Raspberry Pi 5, mit 4PCS PCIe auf M.2 NVMe SSD Adaptern, hält bis zu 4 Raspberry Pi 5 Boards, kompatibel mit 19 Zoll Server Rack
Kostenloser Versand
star

64

GUTE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#10

  • Compatibility - Supports Raspberry Pi 5; 1U Rackmount design is compatible with 19 Inch Server Rack.
  • PCIe Expansion Support - Includes a motherboard that enables PCIe expansion, allowing the connection of M.2 NVMe SSDs in various form factors (2230/2242/2260/2280). Note: This function supports Raspberry Pi 5 only!
  • 2C Interface - The board routes the Raspberry Pi's 5V, GND, SDA, and SCL pins to the rear through PogoPin connectors, offering I2C interface peripherals in a Grove format.
  • Programmable LED Indicator - A red LED on the board serves as a programmable device ID signal, controllable via the GPIO4 pin to indicate the status or identity of the device.
  • Modular Design - Supports the integration of up to five Raspberry Pi devices, with the option to replace one slot with an OLED display frame.
  • 109,99 € AUF AMAZON
raspberry pi 5 festplatte raspberry pi 5 pcie adapter raspberry pi 5 grafikkarte adapter raspberry pi 5 ssd adapter bluetooth adapter raspberry pi 5 hdmi adapter raspberry pi 5 raspberry pi 5 display adapter raspberry pi 5 fan adapter raspberry pi 5 hdmi adapter raspberry pi 5 gpu adapter