Raspberry Pi 4 Geekworm
Die 10 besten Produkte von Dezember 2025
Letzte Aktualisierung:
10. Dezember 2025
Geekworm
Geekworm Raspberry Pi 4 Model B Aluminum Case Durable Passive Heat Dissipation for Raspberry Pi 4B Only
99
MAXIMALE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#1 GEWINNER
▼ Mehr anzeigen
▲ Weniger anzeigen
【Pi 4 Aluminum Case】Compatible with Raspberry Pi 4 Model B(8GB/4GB/2GB/1GB)
【Passive Cooling Design】Don't need extra fan, heavy dute case with eight of 174g, with 4 built-in Heatsink Pillars for better heat dissipation
【Better Cooling Solution】equipped with a copper heatsink, can replace the thermal pad at the CPU with the copper heatsink, and attach proper silicone grease (not included) on two sides of copper heatsink to get better heat dissipation
【Material】Aluminum Alloy, efficient thermal conductivity
【Packing List】1 x Raspberry Pi 4 Case, 8 x Thermal Pads(4pcs for backup), 1 x Copper Heatsink, 1 x Screws Pack
【Note】Same style Raspberry Pi 5 case, refer to ASIN: B0CNPL3V55
11,99 € AUF AMAZON
Geekworm
Geekworm Aluminium Gehäuse mit Kühlkörper für Raspberry Pi 4 Model B - Passive Kühlung, Armor-Design, Schutzfall (Ohne Lüfter)
96
BESTE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#2
▼ Mehr anzeigen
▲ Weniger anzeigen
【Pi 4 Passive Cooling Case】Geekworm raspberry pi 4 armor case, aluminum alloy case for Raspberry Pi 4 Model B (8GB/4GB/2GB/1GB)
【Equipped with 2pcs GPIO Headers】With 2pcs 2x20 Female Headers to extend the GPIO pin and insert GPIO cable
【Packing List】1 x Raspberry Pi 4 Aluminum Case, 1 x Screws Pack, 1 x Hexagon Screwdriver, 3 x Thermal Tapes, 2 x GPIO Headers
【About WiFi Interference】Open case design, don't need to worry about wifi signal so much
【Better Cooling Solution】If you think the blue Thermal Tape is not good enough for heat dissaption, you can replce it with thin 0.5mm cooper heatsink match with CPU grease
12,50 € AUF AMAZON
Geekworm
Geekworm Raspberry Pi 4 11 mm kühlkörper Heatsink (P165-B), Raspberry Pi 4B Radiator for Raspberry Pi 4 Model B & Pi 4 Expansion Board Support POE Extension
92
TOP QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#3
▼ Mehr anzeigen
▲ Weniger anzeigen
Geekworm P165 11mm raspberry pi 4 embedded aluminum heatsink for raspberry pi 4 model b(1GB/ 2GB/ 4GB/ 8GB). WiKi for reference: raspberrypiwiki.com/P165
Supports to cooling down the raspberry pi 4 even when using with the pi 4 expansion board (also support PoE board);
Only equipped with 4 pieces M2.5 x 5 + 6 mm spacers for the P165-B embedded heatsink, you will need to prepare extra standoffs or screws for Raspberry Pi 4 with other expansion boards.
Add one piece of thermal tape as a gift in case you will need. Very few radiators may have processing errors, and the height needs to be supplemented by thermal pads. But it is strongly recommended to use the CPU grease (not included) to get better heat dissipation.
The thickness of this radiator is 11mm. The heat dissipation may be insufficient if overclocking for a long time, pls add a 30mm fan(3010 or 3007) above heatsink then;
9,00 € AUF AMAZON
Geekworm
Geekworm NASPi V2.0 2.5 inch SATA HDD/SSD NAS Storage Kit with Safe Shutdown & Auto Power On Function for Raspberry Pi 4 Model B (Not Include Raspberry Pi 4)
88
HOHE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#4
▼ Mehr anzeigen
▲ Weniger anzeigen
【NASPi V2.0 2.5" SATA Case】Used for raspberry pi 4 with a 2.5 inch SATA HDD/SSD. (Dual 2.5" SATA Board with Case refer to NASPi Gemini: ASIN B07VXF2HJG)
【Function】NAS Storage, Safe Shutdown, Auto Power On, PWM Fan
【Packing List】X823 storage shield *1, X-C1 V2.0 adapter board*1, 4010 PWM cooling fan with X823-A3 metal fan bracket*1, aluminum case*1;
【How to Power】5Vdc +/-5% , ≥4A (Via Type-C Port of X-C1), Recommend Geekworm 20W 5V 4A USB C power adapter (ASIN: B09J4V3RYK)
【Supported Hard Disk Thickness】NASPi supports SSD with a thickness Max. 9.8mm, most 2.5" HDD/SSD on the market are only 7mm thick. HDD/SSD is not included
66,89 € AUF AMAZON
Geekworm
Geekworm Raspberry Pi 4 Netzteil USB-C 20W 5V 4A 5.1V Netzteil Ladegerät für Raspberry Pi 4 8GB / 4GB / 2GB / NASPi / X735 / X708/ X728 / X630 / Pi 400 / Orange Pi 5 / 5B / 5 Plus
84
SICHERE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#5
▼ Mehr anzeigen
▲ Weniger anzeigen
【Raspberry Pi 4 Netzteil】 USB-C Netzteil für Raspberry Pi 4 8GB/4GB/2GB, Auch kompatibel mit Geekworm NASPi / X735 / X708/ X728 / X630 / Orange Pi 5 / Orange Pi 5B / Orange Pi 5 Plus
【 Ausgabe und Eingabe】Ausgang: 5.0V Max.4A 20W; Eingabe: Eingang: 100-240VAC
【4A Ausgang Schnellladung】Max.4000mA - abwärtskompatibel zu 3000mA, 2500mA, 2000mA, 1000mA und 1500mA;
【Packliste】 1x 5V 4A Netzteil mit EU-Stecker
【Netzteil Funktionen】Über spannung schutz; Unter spannung schutz; Über temperatur schutz; Über aktuelle schutz; kurzschluss schutz.
13,80 € AUF AMAZON
Geekworm
Geekworm Raspberry Pi 4 Embedded Heatsink with Fan, Raspberry Pi 4B Armor Aluminum Cooler with 5V Fan, Compatible with Raspberry Pi 4 Model B & Pi 4 Expansion Board
82
SICHERE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#6
▼ Mehr anzeigen
▲ Weniger anzeigen
[Ultra-thin Pi 4 Heatsink] Geekworm embedded aluminum heatsink with only 7mm thickness, compatible with Raspberry Pi 4 1GB/2GB/4GB/8GB
[Cooling Solution] Support installing raspberry pi 4 expansion board above the heatsink, so you can cooling down the raspberry pi 4 even when using with pi 4 expansion board(DO NOT support PoE board)
[M2.5 internal thread mounting hole] Raspberry Pi HAT mounting hole is M2.5 internal thread(this design is convenient for maintenance)
[Fan Supported] Supports the installation of 25*25mm fan(equipped with a 5V cooling fan); Cooling fan can be added when the heat dissipation of a single aluminum heat sink is not enough
[About Spacers] We only keep the M2.5*5+4mm, M2.5*5+5mm, M2.5*13+6mm spacers in the P165-A packing list, due to the Raspberry Pi expansion board usually with 12mm or 20mm height, the three spacers combination is enough in application
10,89 € AUF AMAZON
Geekworm
Geekworm for Raspberry Pi 4 SATA, X825 V2.0 2.5" SATA HDD / SSD Expansion Board UASP Supported for Raspberry Pi 4 8GB/4GB/2GB (Raspberry Pi Not Included)
79
GUTE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#7
▼ Mehr anzeigen
▲ Weniger anzeigen
【Update】X825 V2.0 is the updated version from X825 V1.5. You can use X825 with your raspberry pi 4 and 2.5 inch SATA HDD / SSD
【How to Power】√ Model 1. power via X825 DC Jack: 5V ≥3A with DC 5521 Jack; √ Model 2. power via X735 if working the X735: USB-C 5V ≥3A (recommend 5V 4A 20W power adapter ASIN: B09J4V3RYK) OR 6-30V with DC 5521 Jack (recommend 12V 5A 60W power adapter ASIN: B0BD81W6SN)
【Packing List】X825 V2.0 Board * 1, USB 3.1 Connector * 1, Mounting Screw Pack * 1
【Document】User Manual: wiki.geekworm.com/X825_V2.0; Installation video: youtu.be/JxUNhIxXgj4
【Matching Metal Case】X825 V2.0 only compatible with X825-C8 Case (ASIN: B09295FHBW), X825-C8 Case compatible with max. 9.5mm HDD/SSD. Also fit with X735 Cooling & Power Mgnt Board (ASIN: B07NLR49L1)
32,00 € AUF AMAZON
Geekworm
Geekworm Raspberry Pi 4 UPS X703, Ultra-compact 18650 UPS Shield with Auto Power On for Raspberry Pi 4 8GB/4GB/2GB Only
75
GUTE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#8
▼ Mehr anzeigen
▲ Weniger anzeigen
【Compatibility】UPS with auto power on and Max 5.1V 4A output for Raspberry Pi 4 Model B 8GB/4GB/2GB, can also stack with other Raspberry Pi accessory boards or 3.5 inch screen for enhanced applications. NOT support Raspberry Pi 3
【3A Fast Charging】Supports 3A fast charging via USB-C socket, add 4 test pins to achieve powered between X703 and Raspberry Pi 4 without additional cable
【Working time】Work with single 18650 Lithium Ion battery with up to 4 hours working time, integrated over current protection, over voltage protection and battery reverse connection protection
【Multiple Onboard Interfaces】Allows power input via Type-C socket or XH2.54 connector; On-board PH2.0 connector allows to connect external power switch
【How to power】5Vdc +/-5% , ≥3A (Via Type-C Port of X703), Recommend 5V 4A 20W power supply (ASIN: B09J4V3RYK)
【Note】DON'T supports software safe shutdown.
【Jumper Cap Description】√① If [CHG] pin is OPEN, battery charging will be started after powering on(short press the on-board button to turn on) and stopped after powering off(press and hold for 2-3 seconds to turn off). If [CHG] pin is SHORT, the battery will be automatically charged once your power adapter connected. The purpose of adding the [CHG] jumper is to extend the life cycle of the battery by reducing the number of recharges. √② If [PON] pin is SHORT, power always on, power button disabled; If [PON] pin is OPEN, press power button to turn on, and hold 3s to turn off.
28,00 € AUF AMAZON
Geekworm
Geekworm X825-C8 Gehäuse, unterstützt nur X825 V2.0 2,5 Zoll SATA SSD/HDD Shield & Raspberry Pi 4 & X735 (Raspberry Pi / X825 / X735 Nicht enthalten)
75
GUTE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#9
▼ Mehr anzeigen
▲ Weniger anzeigen
【Packing List】X825-C8 Metal Case x 1, Momentary Power Switch x 1, 4010 Cooling Fan x 1
【Application】for use with Raspberry Pi 4 with X825 V2.0 2.5 inch SATA HDD/SSD Expansion Board (ASIN: B091JSRQ9C) and X735 (ASIN: B07NLR49L1)
【Note】NOT include Raspberry Pi 4 / X825 / X735/ SSD / HDD!
【Supported SSD (Not included)】Support Max 9.5mm thickness 2.5 inch SATA HDD/SSD installation
【About WiFi Description】USB 3.0 high-speed transmission will interfere with the Raspberry Pi's 2.4G wifi signal. So please use Ethernet or WIFI 5G AP if you find the 2.4G signal is unstable. (Pls refer to WiKi X825#Document)
18,00 € AUF AMAZON
Geekworm
Geekworm Raspberry Pi Compute Modul 4 CM4 12 mm eingebetteter Aluminium-Kühlkörper/Kühler/Kühler/Schutzgehäuse unterstützt 30 mm Lüfter (C235)
64
GUTE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#10
▼ Mehr anzeigen
▲ Weniger anzeigen
[12 mm RPi CM4 Kühlkörper] Geekworm entworfener 12 mm Aluminium-Kühlkörper für Raspberry Pi Rechenmodul 4
[Maße und Gewicht] Kühlkörper-Maße: 54 x 39 x 12 mm; Nettogewicht: 30 g.
[ Lüfter unterstützt] Unterstützt die Installation von 30 mm (3007 oder 3010) Lüfter über dem Kühlkörper
[Mit 1 Wärmeleitpad] Bitte schneiden Sie das richtige Wärmeleitpad ab, um es an der CPU des Raspberry Pi CM4
zu befestigen [Wireless Cutout] Dieser C235-Kühlkörper reserviert den Platz, um die externe Antenne für CM4 anzuschließen. [WiKi als Referenz] raspberrypiwiki.com/C235. [Bessere Kühllösung] Es wird empfohlen, einen Kupferkühlkörper zu verwenden (die Dicke beträgt ca. 0,3 - 0,5 mm) mit Silikonfett
8,50 € AUF AMAZON
geekworm raspberry pi 4
geekworm raspberry pi 4 case
raspberry pi 4 geekworm fan
geekworm raspberry pi 4 gehäuse
raspberry pi geekworm
geekworm raspberry pi 4 model b
raspberry pi 4 geekworm fan 3 pin
flirc raspberry pi 4
raspberry pi 4 flirc
geekworm raspberry pi ups
#1 GEWINNER
