main logo

Pi Shield

Die 10 besten Produkte von Oktober 2025
Letzte Aktualisierung: 9. Oktober 2025
FREENOVE
FREENOVE
Freenove Breakout Board for Raspberry Pi 5 / 4B / 3B+ / 3B / 3A+ / 2B / 1B+ / 1A+ / Zero 2 W/Zero W/Zero, Terminal Block Shield HAT with Pin Header, GPIO Status LED
Kostenloser Versand
star

99

MAXIMALE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#1 GEWINNER

  • Compatible Models: Raspberry Pi 5 / 4B / 3B+ / 3B / 3A+ / 2B / 1B+ / 1A+ / Zero 2 W / Zero W / Zero (Note: NOT compatible with 500 / 400)
  • GPIO Status LED: LED on if GPIO outputs / inputs high level, LED off if GPIO outputs / inputs low level
  • Independent LED: The status LED is driven by the chip instead of the GPIO so the GPIO will not be affected
  • Terminal Block and Header: Connect to all pins of Raspberry Pi's 40-pin GPIO header, 2.54 mm (0.1 inch) pitch
  • Pin Name: The BCM numbering name of each pin is printed next to it
  • 11,95 € AUF AMAZON
GeeekPi
GeeekPi
GeeekPi Raspberry Pi GPIO Screw Terminal Block Breakout Board HAT with GPIO Status LED, Raspberry Pi GPIO Expansion Board Breakout Module for Raspberry Pi 4B/3B+/3B/2B/B+/Pi Zero W/Pi Zero 2 W
Kostenloser Versand
star

97

BESTE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#2

  • This is a very beautiful screw terminal expansion version, which is expanded for the pins of the Raspberry Pi. Compatible with Raspberry Pi 4B/3B+/3B/2B/B+/Pi Zero/Pi Zero W/Pi Zero 2 W.
  • It is convenient for everyone to connect when doing electronic experiments. Terminal Block Pitch is 3.5mm. Wire Gauge Range is 16 to 26AWG.Stripping Length is 5mm.There is the pin out information of the GPIO pin on the top of the terminal and on the side.
  • The status information of the pin is displayed. When the GPIO pin is operated and effective in the terminal, the LED matrix on the right side of the terminal will display the status of the GPIO pin, and some distinctions are made in the color selection of the LED lights.
  • The 5V power light is red, while the 3.3V power light is pink, the light of the special function pin is dark blue, and the indicator light of the ordinary GPIO pin is light blue, which is convenient and convenient for connection Observing the state is a good helper for electronic experiments.The positions of the LEDs correspond to the positions of the 2x20pin connectors of the Raspberry Pi.
  • Package Includes: 1x Screw Terminal Block Breakout Board, 1x Screw Kit, 1x Screw Driver, 1x Assembly Instruction
  • Anwendungsvideo:https://www.youtube.com/watch?v=G0xsN9pTVZc
  • 19,99 € AUF AMAZON
FREENOVE
FREENOVE
FREENOVE Universal Breakout Board Compatible with Arduino Nano Micro Raspberry Pi Pico 1 2 W ESP32 ESP8266, Terminal Block Shield HAT with Pin Header, GPIO Status LED, 5 V 3.3 V
Kostenloser Versand
star

92

TOP QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#3

  • Compatible Models: Any board (5 V or 3.3 V) with a pin spacing of 0.1 inch (2.54 mm), width 0.6, 0.7, 0.8, 0.9, 1.0 inch and length up to 2.3 inch (24 pin) (Compatible with Arduino Nano / Micro, Raspberry Pi Pico 1 / 2 (W), ESP32, ESP8266)
  • Power Supply: If using DC input (6~24 V), can provide 5 V and 3.3 V power (DC-DC circuit, up to 3A); otherwise, can use the power of the main board (Need to configure jumper caps, please refer to the tutorial)
  • GPIO Status LED: LED on if GPIO outputs / inputs high level, LED off if GPIO outputs / inputs low level
  • Independent LED: The status LED is driven by the chip instead of the GPIO so the GPIO will not be affected
  • Terminal Block and Header: Connect to all pins of the main board, 2.54 mm (0.1 inch) pitch
  • 15,95 € AUF AMAZON
GeeekPi
GeeekPi
GeeekPi 4X Prototype Breakout DIY Breadboard PCB Shield Board Kit für Raspberry Pi 4 3 2 B+ A+ (Schwarz)
Kostenloser Versand
star

90

HOHE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#4

  • Geeignet für Raspberry Pi 4/ 3/2 Modell B / Raspberry Pi 1 Modell B / Pi 1 Modell A+.
  • Leiterplattengröße: 57 mm x 66 mm, Dicke: 1,5 mm
  • Zum Auftakt der HAT Party haben wir dieses von Proto inspirierte Steckbrett. Es verfügt über ein Raster von 0,3 cm Prototyping-Löchern zur Befestigung von Chips, Widerständen, LEDs, Potentiometern und mehr.
  • Die Löcher sind mit Schienen an der Unterseite verbunden, um die lötfreien Steckplatinen nachzuahmen, die Sie kennen. Es gibt auch lange Steckdosenleisten für + 3V, + 5V und Masseanschlüsse zum Pi.
  • Paket beinhaltet: 4 x Platine, 4 x 20-polige Anschlüsse, 1 x Schraubensatz
  • 11,99 € AUF AMAZON
Hailege
Hailege
Hailege L293D DC Motor Drive Shield Stepper Motor Drive Shield Expansion Board Duemilanove Raspberry Pi
Kostenloser Versand
star

85

SICHERE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#5

  • Using this chip you can use DC motors and power supplies of up to 10 Volts, that some pretty big motors and the chip can supply a maximum current of 600mA per channel.
  • This is a commonly used DC motor drive module, using a small current 293 chip DC motor driver chip.
  • Tested compatible Mega, Diecimila & Duemilanove.
  • Multi-function, easy to operate, a strong driver library support and feature updates.
  • 6,49 € AUF AMAZON
FREENOVE
FREENOVE
Freenove Breakout Board for Raspberry Pi Pico 1 2 W H WH, Terminal Block Shield HAT with Pin Header, GPIO Status LED
Kostenloser Versand
star

82

SICHERE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#6

  • Compatible Models: Raspberry Pi Pico / Pico H / Pico W / Pico WH / Pico 2 / Pico 2 W (NOT included in this kit)
  • GPIO Status LED: LED on if GPIO outputs / inputs high level, LED off if GPIO outputs / inputs low level
  • Independent LED: The status LED is driven by the chip instead of the GPIO so the GPIO will not be affected
  • Terminal Block and Header: Connect to all pins of Raspberry Pi Pico, 2.54 mm (0.1 inch) pitch
  • Pin Name: The name of each Pin is printed next to it
  • 14,95 € AUF AMAZON
Geekworm
Geekworm
Geekworm X1001 PCIe to M.2 NVMe Key-M SSD Shield for Raspberry Pi 5
Kostenloser Versand
star

80

GUTE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#7

  • 【Compatibility】Only for Raspberry Pi 5 16GB / 8GB / 4GB (NOT included)
  • 【Matching Case (NOT included)】P579 (ASIN: B0CRB3DT5M); Or P579 Case with Official Active Cooler (ASIN: B0CT4P893Q)
  • 【M2 Key-M NVMe SSD Supported】Support M.2 KEY-M NVMe SSD 2230/2242/2260/2280 length installation.【IMPORTANT】DON'T use NVMe SSD with Phison controller, please refer to: https://wiki.geekworm.com/X1001#Important_Notes
  • 【How to Power】Use 5Vdc +/-5%, 5A to power via Raspberry Pi 5, and Pi 5 will power X1001 via FFC PCIe ribbon. Recommend to use Geekworm PD 27W power adapter (ASIN: B0CP8SRXSC)
  • 【Packing List】1 x X1001 Shield, 1x Accessories Pack
  • 12,93 € AUF AMAZON
KEYESTUDIO
KEYESTUDIO
KEYESTUDIO Raspberry Pi PICO IO Shield for Raspberry Pi Pico Development Board
Kostenloser Versand
star

74

GUTE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#8

  • This Raspberry Pico IO shield is designed for the Raspberry Pi Pico development board. Note Raspberry Pico is Not Included!
  • It also incorporates communications ports like 2 x I2C, 2 x UART, 2 x SPI, 3 x analog IO and 13 x digital IO as well as a 6.5-12V power interface.
  • On board with four block building holes can assist to wire up multiple sensors or modules, which exceedingly increases more functions.
  • DC input voltage: 6.5-12V ; Output voltage: DC3.3V V
  • There are 26 GPIO pins, so you will be motivated to create what you want to make.
  • 13,99 € AUF AMAZON
GeeekPi
GeeekPi
GeeekPi N04 M.2 M-Key NVMe SSD Shield für Raspberry Pi 5, M.2 2280 PCIe to NVMe SSD Shield Pip PCIe Peripheral Board Top für Raspberry Pi 5 4GB/8GB (SSD and Pi5 Board Are not Included) Barebones
Kostenloser Versand
star

71

GUTE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#9

  • N04 M.2 NVMe to PCIe Adapter is designed for the latest Raspberry Pi 5. It supports the installation of NVMe (M-key) drives in M.2 format sizes 2230, 2242, 2260 and 2280. Extra custom CNC SSD mount screw, no soldering required.
  • PCIe x1 interface in both Gen2 & Gen3 standards. The short trace routing of PCIe is more reliable and faster, fully meeting the signal requirements of PCIe 3.0.
  • Ventilation hole design provides excellent ventilation airflow for cooling; Integrated voltage regulator delivering up to 3A for the 3.3V power rail, compliant with M.2 (NGFF) standard.
  • Comes with a FPC PCIe ribbon, M2 and M2.5 screws, spacers, and extra custom CNC SSD mount screw.
  • 【Matching Case (NOT included)】Metal Case for N04 & Raspberry Pi 5, refer to ASIN: B0CMZG29LG; Aluminum Case for N04 & Raspberry Pi 5,refer to ASIN: B0CMZCG8P7
  • 19,99 € AUF AMAZON
GeeekPi
GeeekPi
GeeekPi Raspberry Pi 5 Gehäuse mit Official Active Cooler, Support PCIe M.2 NVMe SSD Shield Top X1001 / X1000 / N04 / N05
Kostenloser Versand
star

70

GUTE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#10

  • 【Compatibility】① Support Raspberry Pi 5 with PCIe M.2 NVMe Shield TOP like N04 (ASIN: B0CTLX5MW5), N05 (ASIN: B0CTLT39Y3) ②Support separate Raspberry Pi 5 8GB / 4GB Motherboard ③ Support Official Raspberry Pi 5 Active Cooler, for N04 Kit, ASIN: B0CXPBQK7F, for Pi5 8GB with N04 Starter Kit,ASIN: B0D1QQ174C
  • 【Official Raspberry Pi 5 Active Cooler Included】The Raspberry Pi Active Cooler for Raspberry Pi 5 is a dedicated clip-on cooling solution for Raspberry Pi 5. It combines an aluminium heatsink with a temperature-controlled blower fan to keep your Raspberry Pi 5 at a comfortable operating temperature, even under heavy loads.
  • 【Robust and Portable】This Raspberry Pi 5 Metal Case is made of High-Quality iron material, can provide a strong and durable protection for your Raspberry Pi 5 Board.
  • 【Easy Access to all Ports】GeeekPi Raspberry Pi 5 Case can accurately access usb-c power jack, micro HDMI ports, usb ports, Ethernet jack, sd card slot, power button, 4-lane MIPI DSI/CSI connectors and so on.
  • 【Package Includes】1x Metal Case for Raspberry Pi 5, 1x Official Raspberry Pi 5 Active Cooler; 1x Screws Pack,1x 4pcs Rubber Pads; 1x Screwdriver. Please noted: The Raspberry Pi Board is not included in the package.
  • 24,99 € AUF AMAZON
raspberry pi shield shield