main logo

Pi Hat

Die 10 besten Produkte von Oktober 2025
Letzte Aktualisierung: 10. Oktober 2025
Raspberry Pi
Raspberry Pi
PCIe M.2 HAT für Raspberry Pi 5, M-Key          
star

98

MAXIMALE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#1 GEWINNER

  • Unterstützt einspurige PCIe 2.0-Schnittstelle (500 MB/s Spitzenübertragungsrate)
  • Unterstützt Geräte, die den M.2-M-Key-Edge-Anschluss verwenden. Unterstützt Geräte mit dem Formfaktor 2230 oder 2242
  • Kann angeschlossene M.2-Geräte mit bis zu 3 A versorgen. Inklusive Power- und Aktivitäts-LEDs
  • Entspricht der Raspberry Pi HAT+ Spezifikation
  • Lieferung mit Flachbandkabel, 16 mm Stapelkopf, Gewindeabstandshalter und Schrauben und gerändelter Doppelflanschschraube zur Sicherung und Unterstützung des M.2-Peripheriegeräts
  • 14,99 € AUF AMAZON
Geekworm
Geekworm
Geekworm X1001 PCIe to M.2 NVMe Key-M SSD Shield for Raspberry Pi 5
Kostenloser Versand
star

97

BESTE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#2

  • 【Compatibility】Only for Raspberry Pi 5 16GB / 8GB / 4GB (NOT included)
  • 【Matching Case (NOT included)】P579 (ASIN: B0CRB3DT5M); Or P579 Case with Official Active Cooler (ASIN: B0CT4P893Q)
  • 【M2 Key-M NVMe SSD Supported】Support M.2 KEY-M NVMe SSD 2230/2242/2260/2280 length installation.【IMPORTANT】DON'T use NVMe SSD with Phison controller, please refer to: https://wiki.geekworm.com/X1001#Important_Notes
  • 【How to Power】Use 5Vdc +/-5%, 5A to power via Raspberry Pi 5, and Pi 5 will power X1001 via FFC PCIe ribbon. Recommend to use Geekworm PD 27W power adapter (ASIN: B0CP8SRXSC)
  • 【Packing List】1 x X1001 Shield, 1x Accessories Pack
  • 12,93 € AUF AMAZON
GeeekPi
GeeekPi
GeeekPi Raspberry Pi GPIO Screw Terminal Block Breakout Board HAT with GPIO Status LED, Raspberry Pi GPIO Expansion Board Breakout Module for Raspberry Pi 4B/3B+/3B/2B/B+/Pi Zero W/Pi Zero 2 W
Kostenloser Versand
star

94

TOP QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#3

  • This is a very beautiful screw terminal expansion version, which is expanded for the pins of the Raspberry Pi. Compatible with Raspberry Pi 4B/3B+/3B/2B/B+/Pi Zero/Pi Zero W/Pi Zero 2 W.
  • It is convenient for everyone to connect when doing electronic experiments. Terminal Block Pitch is 3.5mm. Wire Gauge Range is 16 to 26AWG.Stripping Length is 5mm.There is the pin out information of the GPIO pin on the top of the terminal and on the side.
  • The status information of the pin is displayed. When the GPIO pin is operated and effective in the terminal, the LED matrix on the right side of the terminal will display the status of the GPIO pin, and some distinctions are made in the color selection of the LED lights.
  • The 5V power light is red, while the 3.3V power light is pink, the light of the special function pin is dark blue, and the indicator light of the ordinary GPIO pin is light blue, which is convenient and convenient for connection Observing the state is a good helper for electronic experiments.The positions of the LEDs correspond to the positions of the 2x20pin connectors of the Raspberry Pi.
  • Package Includes: 1x Screw Terminal Block Breakout Board, 1x Screw Kit, 1x Screw Driver, 1x Assembly Instruction
  • Anwendungsvideo:https://www.youtube.com/watch?v=G0xsN9pTVZc
  • 19,99 € AUF AMAZON
GeeekPi
GeeekPi
GeeekPi P33 M.2 NVME M-Key PoE+ Hat für Raspberry Pi 5, mit offiziellem Raspberry Pi 5 Active Cooler, Unterstützung M.2 NVMe SSD 2230 2242 2260 2280
Kostenloser Versand
star

91

HOHE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#4

  • Kompatibilität: Dieses Set enthält einen P33 M.2 NVME M-Key PoE+ HAT und einen offiziellen Raspberry Pi Active Cooler, der speziell für das neueste Raspberry Pi 5-Modell entwickelt wurde, um optimale Leistung und Kompatibilität zu gewährleisten. für P33 mit Aluminium Case Kit, ASIN: B0DMW98LBR
  • Unterstützung für Hochgeschwindigkeits-NVMe-SSDs: Die HAT-Platine unterstützt M.2-NVMe-SSDs für blitzschnellen Datenzugriff und -speicherung
  • M.2-Schnittstelle: Nutzen Sie die PCIe-Schnittstelle für Hochleistungskommunikation zwischen SSD und Raspberry Pi.
  • PoE HAT Design: Vereinfachen Sie die Stromversorgung mit Power over Ethernet, eliminieren Sie die Notwendigkeit für zusätzliche Stromkabel.
  • Stromeingang: Ethernet (PoE+) 802.3at-Protokoll, bis zu 25,5 W
  • 39,99 € AUF AMAZON
FREENOVE
FREENOVE
Freenove Breakout Board for Raspberry Pi 5 / 4B / 3B+ / 3B / 3A+ / 2B / 1B+ / 1A+ / Zero 2 W/Zero W/Zero, Terminal Block Shield HAT with Pin Header, GPIO Status LED
Kostenloser Versand
star

86

SICHERE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#5

  • Compatible Models: Raspberry Pi 5 / 4B / 3B+ / 3B / 3A+ / 2B / 1B+ / 1A+ / Zero 2 W / Zero W / Zero (Note: NOT compatible with 500 / 400)
  • GPIO Status LED: LED on if GPIO outputs / inputs high level, LED off if GPIO outputs / inputs low level
  • Independent LED: The status LED is driven by the chip instead of the GPIO so the GPIO will not be affected
  • Terminal Block and Header: Connect to all pins of Raspberry Pi's 40-pin GPIO header, 2.54 mm (0.1 inch) pitch
  • Pin Name: The BCM numbering name of each pin is printed next to it
  • 11,95 € AUF AMAZON
Geekworm
Geekworm
Geekworm X1005 Dual NVMe SSD Shield Bottom for Raspberry Pi 5, Supports Hailo-8 AI Accelerator
Kostenloser Versand
star

81

GUTE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#6

  • 【Compatibility】Raspberry Pi 5 Dual NVMe Hat only compatible with Raspberry Pi 5, Model: X1005
  • 【Support Dual M2 NVMe SSD with multiple length】Support M.2 KEY-M NVMe SSD 2230/2242/2260/2280 length installation. Comes with SSD copper pillar for 2230/2242/2260 SSD installation
  • 【 Raspberry Pi 5 AI Hat Extension】 Supports Hailo AI acceleration module built around the Hailo-8L chip from Raspberry Pi AI Kit
  • 【 Support NVMe Boot】 Supports NVMe boot with eeprom 2024/05/17 and later version
  • 【How to Power】 5Vdc +/-5% power via GPIO pin header and FFC, converted to 3.3V max 3A to power the SSD; Recommend to use Geekworm PD 27W power adapter (ASIN:B0CP8SRXSC) or (ASIN:B0CZCZF2QV)
  • 【Packing List】1 x X1015 PCIe Peripheral Board, 2x 40mm PCIe FFC Cable(One as backup), 1x GPIO Header, 1x Screws Pack (Note: not include Raspberry Pi 5, SSD, TF card or power adapter.)
  • 【Matching Case (NOT include)】Refer to P580-V2 Case (ASIN: B0D99HVX3C). NOT compatible with P580!
  • 38,00 € AUF AMAZON
Waveshare
Waveshare
Power Over Ethernet PoE HAT für Raspberry Pi 4 B /3B+, IEEE 802.3af/at PoE Netzwerk Standard, 5V USB-A und 12V Header Ausgänge, Onboard Lüfter und MP8676 Buck Chip
Kostenloser Versand
star

79

GUTE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#7

  • 【PoE HAT For Raspberry Pi 4B/3B+】Standard Raspberry Pi 40PIN GPIO header, supports Raspberry Pi 3B+/4B, allows Power Over Ethernet HAT connecting other HATs.
  • 【Power Over Ethernet】PoE (Power Over Ethernet) capability, IEEE 802.3af/at-compliant power sourcing equipments, providing both network connection and power supply for your Raspberry Pi in one Ethernet cable.
  • 【PoE HAT Isolated】Fully isolated switched-mode power supply (SMPS)
  • 【5V USB-A & 12V Header Outputs】5V USB-A provides up to 4A output (MAX 25W for 12V+5V total output power), While providing stable power for the Raspberry Pi, there's also a USB-A port for powering extra external device.
  • 【Onboard Cooling Fan and MP8676 Buck Chip】PoE HAT with high speed active cooling fan, better heat dissipation, incorporates MP8676 original voltage buck chip, providing up to 4.5A output for Raspberry Pi and USB-A port.
  • 24,49 € AUF AMAZON
Waveshare
Waveshare
Waveshare PoE Power Over Ethernet HAT (F) Compatibele with Raspberry Pi 5 / cm 5, High Power, Onboard Cooling Fan, with Metal Heatsink, Supports 802.3af/at Network Standard
Kostenloser Versand
star

75

GUTE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#8

  • The PoE HAT (F) is a 802.3af/at-compliant Power Over Ethernet accessory for the Raspberry Pi 5. By using this small HAT and some proper 802.3af/at-compliant power sourcing equipments, it is possible to provide both network connection and power supply for your Raspberry Pi in only one Ethernet cable.
  • Standard Raspberry Pi 40PIN GPIO header, supports Raspberry Pi 5 / CM 5
  • PoE (Power Over Ethernet) capability，IEEE 802.3af/at-compliant Fully isolated switched-mode power supply (SMPS)
  • Onboard high speed active cooling fan, with metal heatsink, better heat dissipation
  • Provide e-user manual, please check the manual carefully before using!
  • 30,99 € AUF AMAZON
Raspberry Pi
Raspberry Pi
Raspberry Pi TV HAT Interno DVB-T,DVB-T2        
star

74

GUTE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#9

  • Herkunftsland:- China
  • Verpackungsabmessungen (L x B x H): 2.3 zm x 7.6 zm x 7.6 zm
  • 25,57 € AUF AMAZON
GeeekPi
GeeekPi
GeeekPi N05 M.2 M-Key NVMe HAT für Raspberry Pi 5, M.2 2242 PCIe to NVMe SSD Shield Pip PCIe Peripheral Board Top for Raspberry Pi 5 4GB/8GB (SSD and Pi5 Board Are not Included)
Kostenloser Versand
star

69

GUTE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#10

  • Compatibility --- N05 M.2 NVMe to PICe Adapter is designed for Raspberry Pi 5. It supports the installation of NVMe (M-key) drives in M.2 format sizes 2230 and 2242. Extra custom CNC SSD mount screw, no soldering required.
  • PCIe Support --- PCIe x1 interface in both Gen2 & Gen3 standards.
  • PCIe Ultra-Short Signal Lines ---The short trace routing of PCIe is more reliable and faster, fully meeting the signal requirements of PCIe 3.0.
  • M.2 Standard-Compliant Power System --- Integrated voltage regulator delivering up to 3A for the 3.3V power rail, compliant with M.2 (NGFF) standard.
  • All Necessary Accessories Included --- Comes with a FPC PCIe ribbon, M2 and M2.5 screws, spacers, and extra custom CNC SSD mount screw.
  • 19,99 € AUF AMAZON
pi fan hat pi ssd hat pi hat cluster magnum pi hat pi hat gps pi sdr hat geek pi hat hat raspberry pi rak2245 pi hat raspberry pi hat