Pi 5 Nvme X1002
Die 10 besten Produkte von Dezember 2025
Letzte Aktualisierung:
14. Dezember 2025
Geekworm
Geekworm X1002 M.2 NVMe SSD Pip PCIe Peripheral Board Bottom Base for Raspberry Pi 5
99
MAXIMALE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#1 GEWINNER
▼ Mehr anzeigen
▲ Weniger anzeigen
【Compatibility】only for Raspberry Pi 5 16GB / 8GB / 4GB (NOT included)
【M2 Key-M NVMe SSD Supported】Support M.2 KEY-M NVMe SSD 2230/2242/2260/2280 length installation. 【IMPORTANT】DON'T use NVMe SSD with Phison controller, please refer to: https://wiki.geekworm.com/X1002#Important_Notes
【How to Power】Use 5Vdc +/-5%, 5A to power via Raspberry Pi 5, and Pi 5 will power X1002 via FFC PCIe ribbon. And 2pcs pogo pins to supplementary power during large data transfer. Recommend to use Geekworm PD 27W power adapter (ASIN: B0FGPSRQ75)
【Packing List】1 x X1002 PCIe to NVMe Base, 1x Accessories Pack
【Matching Case (NOT included)】Refer to P580 Case (ASIN: B0D99HVX3C)
【Cooling Solution (NOT included)】Support Raspberry Pi 5 Active Cooler installation, or Geekworm H505 Active Cooler (ASIN: B0D44Y95GW), H509 Passive Cooler (ASIN: B0DDPWYLY1), Argon THRML 30mm Active Cooler (ASIN: B0CSJQC7DV)
【UPS Solution (NOT included)】Support work with X728 UPS (ASIN: B087J7WTYM), but there is no case for X1002 and X728
15,80 € AUF AMAZON
Namvo
Namvo X1002 M.2 NVMe SSD Pip PCIe-Peripheriekarte für Raspberry Pi 5
97
BESTE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#2
▼ Mehr anzeigen
▲ Weniger anzeigen
Kompatibel mit Raspberry Pi 5 8 GB / 4 GB / 2 GB / 1 GB (NICHT im Lieferumfang enthalten)
Supports M.2 KEY-M NVMe SSD 2230/2242/2260/2280 installation
Can be powered via Raspberry Pi 5 with 5Vdc +/-5%, 5A, with supplementary power during data transfer
Allows for Raspberry Pi 5 Active Cooler installation for cooling
Passendes Gehäuse für Raspberry Pi 5 & X1002 bald verfügbar
15,99 € AUF AMAZON
ZDE
ZDE ZP517A PCIe to M.2 HAT Key-M NVMe SSD Shield Solid State Drive Adapter Board Pip PCIe Peripheral Board for Raspberry Pi 5 Support M.2 NVMe SSD 2230 2242 2260 2280
94
TOP QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#3
▼ Mehr anzeigen
▲ Weniger anzeigen
The ZP517A HAT is an M.2 Key-M NVMe SSD Expansion Board for the Raspberry Pi 5 that uses the new PCIe interface of the Raspberry Pi 5 to utilize the M.2 NVMe SSDs for ultra-fast booting and fast data transmission. Supports Gen2 and Gen3 modes.
ZP517A M.2 NVMe to PCIe Adapter Board supports the installation of M.2 Key-M NVMe SSD in 2230/2242/2260/2280 length (Solid State Drive is not included). Comes with extra screws kit for 2230/2242/2260 SSD installation, no soldering required.
Great Accessories for Raspberry Pi 5: ZP517A PCIe Peripheral Board is compatible with Raspberry Pi 5 2GB/4GB/8GB/16GB SBC (NOT include Raspberry Pi 5).
This PCIe to M.2 NVMe adapter supports the installation of official Pi 5 active cooler (Not Included). Cooling fan provides better heatsink for Raspberry Pi 5 and SSD.
How to Power: Power the ZP517A shield directly from the PCIe FFC ribbon cable.
This ZP517A top HAT is suitable for use with aluminum case. For an aluminum enclosure, please refer to ZC501(ASIN: B0DSZYLMSS) and ZC502(ASIN: B0F2995JCY); for Active Cooler, please refer to ZP536(ASIN: B0DSZYHNF5); for Aluminum Case with Active Cooler, please refer to ZP537(ASIN: B0DSZVN5YX) and ZP540(ASIN: B0F299H1Y8).
11,99 € AUF AMAZON
ZDE
ZDE ZP511 PCIe to M.2 Key M NVMe HAT SSD Shield Hard Drive Adapter Board Pip PCIe Peripheral Board for Raspberry Pi 5 Support M.2 SSD 2230 2242 2280
89
HOHE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#4
▼ Mehr anzeigen
▲ Weniger anzeigen
The ZP511 HAT is an M.2 Key-M NVMe SSD Expansion Board for the Raspberry Pi 5 that uses the new PCIe interface of the Raspberry Pi 5 to utilize the M.2 NVMe SSDs for ultra-fast booting and fast data transmission. Supports Gen2 and Gen3 modes.
ZP511 M.2 NVMe to PCIe Adapter Board supports the installation of M.2 KEY-M NVMe SSD in 2230/2242/2280 length (SSD is not included). Comes with extra screws kit for 2230/2242 SSD installation, no soldering required.
This PCIe to M.2 NVMe adapter supports the installation of official Raspberry Pi 5 Active Cooler (Not Included) and there is a reserved airflow vent for the cooling fan, providing excellent heatsink for Raspberry Pi 5 and SSD.
How to Power: Power the ZP511 shield directly from the PCIe FPC ribbon cable. Also, with 40pin header, the board can automatically supply power from GPIO, avoiding the problem of insufficient power supply for ultra-large capacity of SSDs.
Great Accessories for Raspberry Pi 5: ZP511 PCIe Peripheral Board is compatible with Raspberry Pi 5 2GB/4GB/8GB/16GB SBC (NOT include Raspberry Pi 5).
This ZP511 top HAT is suitable for use with aluminum case. Only for aluminum enclosure, please refer to ZC501 (ASIN: B0DSZYLMSS); for Active Cooler, please refer to ZP536(ASIN: B0DSZYHNF5); for Aluminum Case with Active Cooler, please refer to ZP537(ASIN: B0DSZVN5YX).
11,99 € AUF AMAZON
Geekworm
Geekworm X1001 PCIe to M.2 NVMe Key-M SSD Shield for Raspberry Pi 5
85
SICHERE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#5
▼ Mehr anzeigen
▲ Weniger anzeigen
【Compatibility】Only for Raspberry Pi 5 16GB / 8GB / 4GB (NOT included)
【Matching Case (NOT included)】P579 (ASIN: B0CRB3DT5M); Or P579 Case with Official Active Cooler (ASIN: B0CT4P893Q)
【M2 Key-M NVMe SSD Supported】Support M.2 KEY-M NVMe SSD 2230/2242/2260/2280 length installation.【IMPORTANT】DON'T use NVMe SSD with Phison controller, please refer to: https://wiki.geekworm.com/X1001#Important_Notes
【How to Power】Use 5Vdc +/-5%, 5A to power via Raspberry Pi 5, and Pi 5 will power X1001 via FFC PCIe ribbon. Recommend to use Geekworm PD 27W power adapter (ASIN: B0FGPSRQ75 / B0CZCZF2QV / B0CP8SRXSC)
【Packing List】1 x X1001 Shield, 1x Accessories Pack
12,93 € AUF AMAZON
FREENOVE
Freenove M.2 NVMe Adapter V2 for Raspberry Pi 5 (Without SSD), M.2 HAT Add-on Board, Solid State Drive Size 2230 2242 2260 2280, PCIe 2.0/3.0, Max Speed 1231 MB/s
81
GUTE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#6
▼ Mehr anzeigen
▲ Weniger anzeigen
Big Upgrade: Boost your system to an amazing speed by upgrading memory card (SDR104: 104 MB/s max) to SSD (PCIe 2.0: 500 MB/s max, PCIe 3.0: 1231 MB/s max) (Note: The max speed is declared by the Raspberry Pi documentation, usually unable to achieve)
Compatible SSDs: M.2 NVMe SSDs, PCIe 2.0 or 3.0, size 2230 / 2242 / 2260 / 2280 (Note: NOT compatible with M.2 SATA SSDs)
Two Uses: Used as system disk or regular hard drive, provide detailed tutorial (The download link can be found on the product box) (No paper tutorial)
Easy to Use: Just tighten the screws and connect the ribbon cable to install it on the top or bottom (Simple configuration needed, please refer to tutorial)
Compatible Models: Raspberry Pi 5 only (Note: NOT compatible with any other models)
9,95 € AUF AMAZON
ELECTROCOOKIE
ElectroCookie PCIe auf M.2 NVMe SSD HAT Board für Raspberry Pi 5 (X1001)
80
GUTE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#7
▼ Mehr anzeigen
▲ Weniger anzeigen
Verbesserte Systemleistung – Genießen Sie schnellere Datenverarbeitung und Reaktionszeiten, ideal für Projekte, die High-Speed-Speicher erfordern, mit erweiterten Speicheroptionen.
Unterstützt M.2 Key-M NVMe SSD – Entworfen für Raspberry Pi 5, unterstützt dieser M.2 HAT 2230, 2242, 2260 und 2280 NVMe SSD-Größen und enthält einen Kupfer-Säulenhalter für sichere 2230, 2242 und 2260 SSD-Installation.
**SSD-Kompatibilität und Setup-Informationen: Bitte überprüfen Sie die SSD-Kompatibilität in der Produktbeschreibung oder suchen Sie online nach "Pi Benchmark". Anweisungen zur Einrichtung des Bootlaufwerks sind auch in der Produktbeschreibung unten enthalten, oder Sie können die offizielle Raspberry Pi Dokumentation und Online-Tutorials befolgen.
Voll kompatibel mit ElectroCookie Gehäuse B0DLWKVQGT und Kühler B0DLWQ44H5.
Stromquelle: Der SSD-Schild wird direkt über das FFC-PCIe-Band mit Strom versorgt; verwenden Sie einen PD 27-W-Netzadapter für den Raspberry Pi 5.
Lieferumfang: 1 x M.2 NVMe SSD HAT Board, 1 x Montage-Komponentenpaket; Hinweis: Raspberry Pi 5, SSD-Laufwerk und Netzteil sind nicht im Lieferumfang enthalten.
12,99 € AUF AMAZON
GeeekPi
GeeekPi N04 M.2 M-Key NVMe SSD Shield für Raspberry Pi 5, M.2 2280 PCIe to NVMe SSD Shield Pip PCIe Peripheral Board Top für Raspberry Pi 5 4GB/8GB (SSD and Pi5 Board Are not Included) Barebones
35% Rabatt
76
GUTE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#8
▼ Mehr anzeigen
▲ Weniger anzeigen
N04 M.2 NVMe to PCIe Adapter is designed for the latest Raspberry Pi 5. It supports the installation of NVMe (M-key) drives in M.2 format sizes 2230, 2242, 2260 and 2280. Extra custom CNC SSD mount screw, no soldering required.
PCIe x1 interface in both Gen2 & Gen3 standards. The short trace routing of PCIe is more reliable and faster, fully meeting the signal requirements of PCIe 3.0.
Ventilation hole design provides excellent ventilation airflow for cooling; Integrated voltage regulator delivering up to 3A for the 3.3V power rail, compliant with M.2 (NGFF) standard.
Comes with a FPC PCIe ribbon, M2 and M2.5 screws, spacers, and extra custom CNC SSD mount screw.
【Matching Case (NOT included)】Metal Case for N04 & Raspberry Pi 5, refer to ASIN: B0CMZG29LG; Aluminum Case for N04 & Raspberry Pi 5,refer to ASIN: B0CMZCG8P7
12,93 € AUF AMAZON
GeeekPi
GeeekPi Metal Gehäuse mit N07 M.2 NVMe SSD Pip PCIe Peripheral Board Bottom für Raspberry Pi 5, Support M.2 Key-M NVMe SSD 2230/2242/2260/2280
16% Rabatt
73
GUTE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#9
▼ Mehr anzeigen
▲ Weniger anzeigen
【Compatibility】This kit includes a metal case and a N07 M.2 PCIe to NVMe Bottom SSD Pip PCIe Peripheral Board. It is compatible with the latest Raspberry Pi 5 4GB/8GB and Supports M.2 NVMe SSD 2230 2242 2260 2280. The Metal Case also compatible with the X1002 or Pimoroni NVMe Base.
【Easy Access to Pi 5】GeeekPi N07 Metal Case can easy access to Raspberry Pi 5 usb-c power jack, micro HDMI ports, usb ports, Ethernet jack, sd card slot, power button,etc.
【Raspberry Pi 5 Active Cooler Supported (NOT included)】Supports Raspberry Pi 5 active cooler installation, together with beautifully crafted cooling holes to ensures efficient heat dissipation. with Active Cooler Kit, ASIN: B0DFLVP88L
【Packing List】1x Metal Case for Raspberry Pi 5, 1x N07 PCIe M.2 Key-M NVMe SSD PCIe Peripheral Board, 2x FPC Cable, 1x Screwdriver, 1x Screw Pack
【Please Noted】NOT include Raspberry Pi 5 Board, M.2 NVMe SSD, Raspberry Pi 5 Active Cooler, or Power Adapter.
25,18 € AUF AMAZON
Geekworm
Geekworm X1004 Dual M.2 NVMe SSD Shield PCIe Peripheral Board for Raspberry Pi 5
64
GUTE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#10
▼ Mehr anzeigen
▲ Weniger anzeigen
【Compatibility】only for Raspberry Pi 5 16GB / 8GB / 4GB (NOT included)
【Support Dual M2 SSD】Compatible with M.2 KEY-M NVMe SSD 2280 (NOT included)
【How to Power】5Vdc +/-5%, 5A via Raspberry Pi 5. Recommend to use Geekworm PD 27W power adapter (ASIN: B0CP8SRXSC); or GaN PD 27W power supply (ASIN: B0CZCZF2QV)
【Support NVMe Boot】X1004 now supports NVMe boot with the latest eeprom (2024/05/17 version)
【Packing List】1 x X1004 PCIe to M2 NVMe Shield, 1x Accessories Pack
【Matching Case (NOT included)】Refer to P579-V2 Case (ASIN: B0CRB3DT5M), or P579-V2 Case with active cooler (ASIN: B0CT4P893Q)
【Note】Since X1004 is using ASMedia ASM1182e PCIe switch, it can't support PCIe Gen 3 speed, so even though we forced to turn on PCIe Gen 3.0 setting in Raspberry Pi 5, it is limited by ASMedia ASM1182e PCIe switch. speed is still PCIe Gen 2.0 speed.
38,50 € AUF AMAZON
nvme pi 5
pi 5 nvme
nvme hat pi 5
pi 5 nvme hat
nvme raspberry pi 5
raspberry pi 5 nvme
pi 5 case nvme
pi 5 gehäuse nvme
pi 5 nvme case
pi 5 nvme shield
#1 GEWINNER
