main logo

Phaetus Dragonfly Bms Nozzle 0.4

Die 10 besten Produkte von Oktober 2025
Letzte Aktualisierung: 12. Oktober 2025
Phaetus
Phaetus
Phaetus Dragonfly Hot-End BMS                    
Kostenloser Versand
star

99

MAXIMALE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#1 GEWINNER

  • Ganzmetall-Set mit hoher Temperaturbeständigkeit bis 500 °C.
  • Das Material des heißen Endstücks besteht hauptsächlich aus Kupferlegierung, die sich schneller erwärmt und Wärme besser ableitet.
  • Der konische Einbau von Heatbreak und Kühlkörper sorgt für eine perfekte Wärmeableitung.
  • Die innere Lochrauhigkeit des Heatbreaks ist Ra≤0,3, was eine gleichmäßigere Bewegung des Filaments ermöglicht und zu einer höheren Auflösung der Drucke führt.
  • 59,90 € AUF AMAZON
Phaetus
Phaetus
Phaetus PS M6 Hardened Steel Nozzle 0,4 mm - 1,75 mm - 1 pcs
Kostenloser Versand
star

96

BESTE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#2

  • Hardness over HRC60 makes an minimum wear at the hole size after a long time printing with abrasive materials.
  • Temperature resistance up to 450℃, easily handling with special engineering plastics such as PEEK.
  • Special processing technology and post-treatment make the nozzle without burr at the edge of tip and without debris in the hole. Inner hole roughness lower than Ra0.4; Higher smoothness and less adhesion. Min. orifice diameter 0.1mm/±0.01mm in experimental level application, making sure high accuracy printing.
  • High quality imported die steel material ensures the stability of performance.
  • Wear-resistance, High temperature performance, suitable for 3D printing composites with abrasive additives such as Carbon Fiber, Steel, Wood, Boron Carbide, Tungsten and Phosphorescent pigment as well as conventional materials.
  • 14,99 € AUF AMAZON
Phaetus
Phaetus
Phaetus Dragon, Standard-Durchfluss, heißes Endstück
Kostenloser Versand
star

95

TOP QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#3

  • Ganzmetall-Set mit hoher Temperaturbeständigkeit bis 500 °C.
  • Die starre Struktur des integrierten Rahmens macht den Austausch der Düse bequemer, ohne den Heizblock anfassen zu müssen.
  • Das Material des heißen Endstücks besteht hauptsächlich aus Kupferlegierung, die sich schneller erwärmt und Wärme besser ableitet.
  • Erhöhte, starre Stützstruktur bleibt auch bei äußerer Krafteinwirkung intakt.
  • 75,08 € AUF AMAZON
Phaetus
Phaetus
Phaetus PS M6 Plated Copper Nozzle 0,4 mm - 1,75 mm - 1 pcs
Kostenloser Versand
star

89

HOHE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#4

  • Temperature resistance up to 500℃, the best choice for special engineering plastics such as PEEK.
  • High thermal performance keeps an even temperature of nozzle tip during printing, thus guaranteeing a stable extrusion; Meanwhile, further improves printing speed without sacrificing the quality.
  • Special processing technology and post-treatment make the nozzle without burr at the edge of tip and without debris in the hole. Inner hole roughness lower than Ra0.4 and the whole nozzle nickel plated, Enhanced higher smoothness and less adhesion.
  • Superior quality copper alloy with high strength and high thermal conductivity ensures the stability of performance.
  • High temperature performance, working well for high temperature applications, printing with materials such as PEEK, PEKK, PEI, PSU, PPSU and etc.
  • 12,99 € AUF AMAZON
PrimaCreator
PrimaCreator
Phaetus x PrimaCreator MK8 Tungsten Nozzle 0,4 mm - 1 pcs
Kostenloser Versand
star

83

SICHERE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#5

  • Super Wear-Resistance | Using the world's leading ultra-high hardness tungsten carbide (hardness > 2700Hv (up to 2900Hv)), super wear resistance ensures long-term printing without wearness of nozzle hole and tip flat.
  • High Temperature Performance | Composed of tungsten carbide and copper alloy with super hardness and excellent conductivity, maximum printing temperature can be 550°C.
  • Low Pushing Force | Tungsten Carbide Nozzle with high purity more than 99.98% and high thermal performance keeps an even temperature of nozzle tip during printing, thus guaranteeing a stable extrusion.
  • Faster Speed | Due to the high thermal performance of the nozzle in general, the printing speed can be pushed even further without sacrificing the quality. Unique passageway in the nozzle improves the flow rate at the inner hole faster.
  • Low Friction | The whole nozzle is applied with DLC coating after adding a hard and smooth nickel plating layer. Surface friction coefficient is as low as 0.05 which makes the nozzle with clean printing, without plastic sticking to it.
  • 44,00 € AUF AMAZON
Phaetus
Phaetus
Phaetus Dragonfly BMS/BMO Heat Break Kit        
Kostenloser Versand
star

82

SICHERE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#6

  • Heat Break for Pheatus Dragonfly BMO and BMS Hotends
  • 24,99 € AUF AMAZON
Phaetus
Phaetus
Phaetus Dragon, High-Flow, heißes Endstück      
Kostenloser Versand
star

80

GUTE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#7

  • Ganzmetall-Set mit hoher Temperaturbeständigkeit bis 500 °C.
  • Die starre Struktur des integrierten Rahmens macht den Austausch der Düse bequemer, ohne den Heizblock anfassen zu müssen.
  • Erhöhte, starre Stützstruktur bleibt auch bei äußerer Krafteinwirkung intakt.
  • 84,90 € AUF AMAZON
Bondtech
Bondtech
Bondtech CHT® Coated Brass Nozzle 0,4 mm -1 pcs  
Kostenloser Versand
star

77

GUTE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#8

  • These are nozzles for High Flow applications
  • Bondtech CHT nozzles split the filament into 3 thinner strands allowing to melt the material from within. In doing so, the material melts faster and higher flow rates can be used.
  • A Nickel coating is applied to our Coated Brass nozzles to provide protection against corrosion, erosion, and abrasion. Nickel coated nozzles have more corrosion resistance and lower coefficient of friction, which allows slicker feeding of material and delays plastic adhesion to the nozzle's surface.
  • 10
  • 24,85 € AUF AMAZON
E3D
E3D
E3D Prusa ObXidian MK4/XL Nozzle - 1 pcs - 0.4mm
Kostenloser Versand
star

70

GUTE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#9

  • >These high-quality 3D printing nozzles are designed specifically for use with Prusas latest extruder – Nextruder. Compatible with Prusas MK4 and XL 3D printers, they feature an all-metal filament guide which means that Nextruders filament path is entirely metal.
  • With a wear resistance that is orders of magnitude higher than any other E3D nozzle, ObXidian is really hard, making it the perfect nozzle for printing abrasive/filled polymers with. This is achieved by pairing a tool steel insert with our new E3DLC coating. This specially formulated coating also embeds non-stick properties into the Nozzle itself.
  • Meaning considerably less plastic build-up around the Nozzle.
  • E3D
  • 56,99 € AUF AMAZON
Phaetus
Phaetus
Phaetus Dragon HF Heat Break Kit & PS M6 Plated Copper Nozzle 0,4 mm - 1,75 mm - 1 pcs
star

67

GUTE QUALITÄT

AUF AMAZON ANSEHEN
Amazon.de
#10

  • Produkt 1: HF Heat Break Kit for Phaetus Dragon Hotends
  • Produkt 1: HF Heat Break Kit for Phaetus Dragon Hotends
  • Produkt 1: Mechanical Components
  • Produkt 1: Phaetus Dragon HF Heat Break Kit
  • Produkt 2: Temperature resistance up to 500℃, the best choice for special engineering plastics such as PEEK.
  • Produkt 2: High thermal performance keeps an even temperature of nozzle tip during printing, thus guaranteeing a stable extrusion; Meanwhile, further improves printing speed without sacrificing the quality.
  • Produkt 2: Special processing technology and post-treatment make the nozzle without burr at the edge of tip and without debris in the hole. Inner hole roughness lower than Ra0.4 and the whole nozzle nickel plated, Enhanced higher smoothness and less adhesion.
  • Produkt 2: Superior quality copper alloy with high strength and high thermal conductivity ensures the stability of performance.
  • 36,98 € AUF AMAZON
phaetus dragonfly bms nozzle 0.4 nozzle nozzle 0.4 cht nozzle 0.4 bambu nozzle 0.4 k1c nozzle 0,4 revo nozzle 0.4 v6 nozzle 0.4