Phaetus Dragon 0,3 Mm Nozzle
Die 10 besten Produkte von Dezember 2025
Letzte Aktualisierung:
14. Dezember 2025
Phaetus
Phaetus PS M6 Plated Copper Nozzle 0,4 mm - 1,75 mm - 1 pcs
98
MAXIMALE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#1 GEWINNER
▼ Mehr anzeigen
▲ Weniger anzeigen
Temperature resistance up to 500℃, the best choice for special engineering plastics such as PEEK.
High thermal performance keeps an even temperature of nozzle tip during printing, thus guaranteeing a stable extrusion; Meanwhile, further improves printing speed without sacrificing the quality.
Special processing technology and post-treatment make the nozzle without burr at the edge of tip and without debris in the hole. Inner hole roughness lower than Ra0.4 and the whole nozzle nickel plated, Enhanced higher smoothness and less adhesion.
Superior quality copper alloy with high strength and high thermal conductivity ensures the stability of performance.
High temperature performance, working well for high temperature applications, printing with materials such as PEEK, PEKK, PEI, PSU, PPSU and etc.
12,99 € AUF AMAZON
Phaetus
Phaetus PS M6 Hardened Steel Nozzle 0,4 mm - 1,75 mm - 1 pcs
97
BESTE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#2
▼ Mehr anzeigen
▲ Weniger anzeigen
Hardness over HRC60 makes an minimum wear at the hole size after a long time printing with abrasive materials.
Temperature resistance up to 450℃, easily handling with special engineering plastics such as PEEK.
Special processing technology and post-treatment make the nozzle without burr at the edge of tip and without debris in the hole. Inner hole roughness lower than Ra0.4; Higher smoothness and less adhesion. Min. orifice diameter 0.1mm/±0.01mm in experimental level application, making sure high accuracy printing.
High quality imported die steel material ensures the stability of performance.
Wear-resistance, High temperature performance, suitable for 3D printing composites with abrasive additives such as Carbon Fiber, Steel, Wood, Boron Carbide, Tungsten and Phosphorescent pigment as well as conventional materials.
15,87 € AUF AMAZON
Phaetus
Phaetus Dragon, High-Flow, heißes Endstück
94
TOP QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#3
▼ Mehr anzeigen
▲ Weniger anzeigen
Ganzmetall-Set mit hoher Temperaturbeständigkeit bis 500 °C.
Die starre Struktur des integrierten Rahmens macht den Austausch der Düse bequemer, ohne den Heizblock anfassen zu müssen.
Erhöhte, starre Stützstruktur bleibt auch bei äußerer Krafteinwirkung intakt.
80,66 € AUF AMAZON
Phaetus
Phaetus PS M6 Hardened Steel Nozzle 0,6 mm - 1,75 mm - 1 pcs
89
HOHE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#4
▼ Mehr anzeigen
▲ Weniger anzeigen
Hardness over HRC60 makes an minimum wear at the hole size after a long time printing with abrasive materials.
Temperature resistance up to 450℃, easily handling with special engineering plastics such as PEEK.
Special processing technology and post-treatment make the nozzle without burr at the edge of tip and without debris in the hole. Inner hole roughness lower than Ra0.4; Higher smoothness and less adhesion. Min. orifice diameter 0.1mm/±0.01mm in experimental level application, making sure high accuracy printing.
High quality imported die steel material ensures the stability of performance.
Wear-resistance, High temperature performance, suitable for 3D printing composites with abrasive additives such as Carbon Fiber, Steel, Wood, Boron Carbide, Tungsten and Phosphorescent pigment as well as conventional materials.
14,99 € AUF AMAZON
PrimaCreator
Phaetus x PrimaCreator MK8 Tungsten Nozzle 0,4 mm - 1 pcs
87
SICHERE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#5
▼ Mehr anzeigen
▲ Weniger anzeigen
Super Wear-Resistance | Using the world's leading ultra-high hardness tungsten carbide (hardness > 2700Hv (up to 2900Hv)), super wear resistance ensures long-term printing without wearness of nozzle hole and tip flat.
High Temperature Performance | Composed of tungsten carbide and copper alloy with super hardness and excellent conductivity, maximum printing temperature can be 550°C.
Low Pushing Force | Tungsten Carbide Nozzle with high purity more than 99.98% and high thermal performance keeps an even temperature of nozzle tip during printing, thus guaranteeing a stable extrusion.
Faster Speed | Due to the high thermal performance of the nozzle in general, the printing speed can be pushed even further without sacrificing the quality. Unique passageway in the nozzle improves the flow rate at the inner hole faster.
Low Friction | The whole nozzle is applied with DLC coating after adding a hard and smooth nickel plating layer. Surface friction coefficient is as low as 0.05 which makes the nozzle with clean printing, without plastic sticking to it.
39,80 € AUF AMAZON
Sea 3D
Sea 3D 0,3mm 3 Stück Anycubic i3 Düse, Kobra Go & Neo Nozzle e3d v6 3D Drucker e3d Mega S
80
GUTE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#6
▼ Mehr anzeigen
▲ Weniger anzeigen
Düse für Anycubic 3D Drucker mit exzellentem Preis- / Leistungsverhältnis
Passend für Anycubic i3, Kobra Go & Neo, Mega, Anycubic Mega Zero, Chiron und andere 3D Drucker
Größen von 0,4mm bis 1mm Durchmesser
Aus Messing für perfekte Wärmeübertragung
Geiegnet für alle Filamente mit 1,75mm Durchmesser
5,21 € AUF AMAZON
Phaetus
Phaetus Dragon HF Heat Break Kit & PS M6 Plated Copper Nozzle 0,4 mm - 1,75 mm - 1 pcs
79
GUTE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#7
▼ Mehr anzeigen
▲ Weniger anzeigen
Produkt 1: HF Heat Break Kit for Phaetus Dragon Hotends
Produkt 1: HF Heat Break Kit for Phaetus Dragon Hotends
Produkt 1: Mechanical Components
Produkt 1: Phaetus Dragon HF Heat Break Kit
Produkt 2: Temperature resistance up to 500℃, the best choice for special engineering plastics such as PEEK.
Produkt 2: High thermal performance keeps an even temperature of nozzle tip during printing, thus guaranteeing a stable extrusion; Meanwhile, further improves printing speed without sacrificing the quality.
Produkt 2: Special processing technology and post-treatment make the nozzle without burr at the edge of tip and without debris in the hole. Inner hole roughness lower than Ra0.4 and the whole nozzle nickel plated, Enhanced higher smoothness and less adhesion.
Produkt 2: Superior quality copper alloy with high strength and high thermal conductivity ensures the stability of performance.
36,98 € AUF AMAZON
Phaetus
Phaetus Dragon, Standard-Durchfluss, heißes Endstück
76
GUTE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#8
▼ Mehr anzeigen
▲ Weniger anzeigen
Ganzmetall-Set mit hoher Temperaturbeständigkeit bis 500 °C.
Die starre Struktur des integrierten Rahmens macht den Austausch der Düse bequemer, ohne den Heizblock anfassen zu müssen.
Das Material des heißen Endstücks besteht hauptsächlich aus Kupferlegierung, die sich schneller erwärmt und Wärme besser ableitet.
Erhöhte, starre Stützstruktur bleibt auch bei äußerer Krafteinwirkung intakt.
74,99 € AUF AMAZON
Phaetus
Phaetus Dragon Hotend UHF
73
GUTE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#9
▼ Mehr anzeigen
▲ Weniger anzeigen
Für alle V6-Hotend-Schnittstellen, Prusa i3 MK3 / MK3S-Drucker und Titan- und BMG-Extruder
Ultra-High-Speed-Druck: Der verlängerte Heizblock aus Kupferlegierung ist mit einer verlängerten Mutter ausgestattet, die einen ultrahohen Extrusionsdurchsatz von bis zu 70,5 mm³/s ermöglicht.
Ultradünner Titanlegierungs-Heatbreak: Ein dünnwandiger Heatbreak mit nur 0,25 mm Wandstärke und hoher Verschleißfestigkeit sorgt für eine hervorragende Wärmedämmung und weniger Verstopfung.
Düsenwechsel mit einer Hand: Die Schrauben aus Titanlegierung haben eine geringe Wärmeleitfähigkeit und ermöglichen einen einhändigen Düsenwechsel.
Hohe Filamentkompatibilität: Das Hotend ist kompatibel mit allen thermoplastischen Filamenten, einschließlich, aber nicht beschränkt auf typische Faserverbundfilamente wie PLA, ABS, PETG, TPU, PP, PA, PEEK, PEI und PLA-CF, ABS-CF, PETG-CF, PA-CF / GF sowie Verbundfilamente wie Stahl, Holz, Borcarbid, Wolfram und fluoreszierende Filamente.
103,69 € AUF AMAZON
Phaetus
Phaetus x VORON Dragon HF Hot-End
65
GUTE QUALITÄT
AUF AMAZON ANSEHEN
Amazon.de
#10
▼ Mehr anzeigen
▲ Weniger anzeigen
Heatbreak with an ultra-thin wall thickness as thin as 0.1mm, realizing an excellent thermal insulation.
Increased rigid support structure guarantee the heatbreak remaining intact under the impact of external force.
Integral frame rigid structure makes nozzle replacement more convenient without grasping the heatblock.
The inner hole roughness of nozzle and heatbreak Ra0.3, which allow a more smooth movement of filament, resulting a higher resolution prints.
Standard hotend and high flow hotend have the same overall dimension, which realize a zero barrier for interchangeability.
95,53 € AUF AMAZON
phaetus dragon nozzle